Gigabyte GA-H87N-WIFI Owner's manual

Brand: Gigabyte

Model: GA-H87N-WIFI

Category: Server/workstation motherboards

Type: Owner's manual

This manual is also suitable for

GA-Z87N-WIFI

GA-Z87N-WIFI

GA-H87N-WIFI

User's Manual

Rev. 1002

12ME-Z87NWIF-1002R

Wireless Module Country Approvals:

May 20, 2013

Motherboard

GA-Z87N-WIFI

GA-H87N-WIFI

May 20, 2013

See the latest safety and regulatory documents at GIGABYTE's website.

GA-Z87N-WIFI/GA-H87N-WIFI

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE

without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in

any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of docu-

mentations:

For quick set-up of the product, read the Quick Installation Guide included with the product.

For detailed product information, carefully read the User's Manual.

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV:

1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before

updating motherboard BIOS, drivers, or when looking for technical information.

Example:

- 4 -

Table of Contents

Box Contents ................................................................................................................... 6

Optional Items .................................................................................................................6

GA-Z87N-WIFI/GA-H87N-WIFI Motherboard Layout .....................................................7

GA-Z87N-WIFI/GA-H87N-WIFI Motherboard Block Diagram ........................................ 8

Chapter 1 Hardware Installation ..................................................................................... 9

1-1 Installation Precautions ................................................................................... 9

1-2 ProductSpecications ................................................................................... 10

1-3 Installing the CPU and CPU Cooler............................................................... 13

1-3-1 Installing the CPU ..................................................................................................13

1-3-2 Installing the CPU Cooler ......................................................................................15

1-4 Installing the Memory .................................................................................... 16

1-4-1 DualChannelMemoryConguration ....................................................................16

1-4-2 Installing a Memory ................................................................................................17

1-5 Installing an Expansion Card ......................................................................... 18

1-6 Back Panel Connectors ................................................................................. 19

1-7 Internal Connectors ....................................................................................... 22

Chapter 2 BIOS Setup .................................................................................................. 31

2-1 Startup Screen ............................................................................................... 32

2-2 The Main Menu .............................................................................................. 33

2-3 M.I.T. .............................................................................................................. 35

2-4 System ........................................................................................................... 44

2-5 BIOS Features ............................................................................................... 45

2-6 Peripherals ..................................................................................................... 49

2-7 Power Management ....................................................................................... 52

2-8 Save & Exit .................................................................................................... 54

Chapter3 ConguringSATAHardDrive(s) ..................................................................55

3-1 ConguringSATAControllers ........................................................................ 55

3-2 Installing the SATA RAID/AHCI Driver and Operating System ..................... 67

- 5 -

Chapter 4 Drivers Installation .......................................................................................71

4-1 Chipset Drivers .............................................................................................. 71

4-2 Application Software ...................................................................................... 72

4-3 Information ..................................................................................................... 72

Chapter 5 Unique Features ...........................................................................................73

5-1 BIOS Update Utilities ..................................................................................... 73

5-1-1 Updating the BIOS with the Q-Flash Utility ...........................................................73

5-1-2 Updating the BIOS with the @BIOS Utility ............................................................76

5-2 APP Center .................................................................................................... 77

5-2-1 EasyTune ................................................................................................................78

5-2-2 EZ Setup ................................................................................................................79

5-2-3 USB Blocker .......................................................................................................... 84

5-3 Intel®SBA(SmallBusinessAdvantage)k ................................................... 85

5-4 Using the Wi-Fi/Bluetooth Utilities ................................................................. 86

5-4-1 Using the Wi-Fi Share Utility ................................................................................ 86

5-4-2 Using the Cloud Station Utility .............................................................................. 90

Chapter 6 Appendix ......................................................................................................97

6-1 ConguringAudioInputandOutput .............................................................. 97

6-1-1 Conguring2/4/5.1/7.1-ChannelAudio ..................................................................97

6-1-2 ConguringS/PDIFOut ........................................................................................ 99

6-1-3 ConguringMicrophoneRecording .................................................................... 100

6-1-4 Using the Sound Recorder ..................................................................................102

6-2 Troubleshooting ........................................................................................... 103

6-2-1 Frequently Asked Questions ...............................................................................103

6-2-2 Troubleshooting Procedure .................................................................................104

Regulatory Statements ........................................................................................... 106

Contact Us ...............................................................................................................111

kOnly for GA-H87N-WIFI.

- 6 -

Box Contents

5GA-Z87N-WIFI or GA-H87N-WIFI motherboard

5Motherboard driver disk

5Wireless module driver disk

5User's Manual

5Quick Installation Guide

5Two SATA cables

5I/O Shield

5One antenna

Optional Items

2-portUSB2.0bracket(PartNo.12CR1-1UB030-6*R)

eSATAbracket(PartNo.12CF1-3SATPW-4*R)

3.5"FrontPanelwith2USB3.0/2.0ports(PartNo.12CR1-FPX582-2*R)

HDMI-to-DVIadapter(PartNo.12CT2-HDMI01-1*R)

COMportcable(PartNo.12CF1-1CM001-3*R)

The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

- 7 -

KB_MS_USB

F_USB30

COM

DOUBLE_HDMI

CPU_FAN

LGA1150

ATX

GA-Z87N-WIFI

GA-H87N-WIFI

F_AUDIO

AUDIO

B_BIOS M_BIOS

PCIEX16

DDR3_1

DDR3_2

BAT

ATX_12V

Intel® Z87 j

Intel® H87 k

DVI

ANTENNA_BRACKET

USB30_LAN1

USB30_LAN2

CODEC

SATA3_3

SATA3_2

SATA3_0

SATA3_1

CLR_CMOS

F_PANEL

iTE®

Super I/O (Note)

F_USB

WIFI Module

SYS_FAN

SPDIF_O

Atheros®

GbE LAN

Intel® GbE LAN

GA-Z87N-WIFI/GA-H87N-WIFI Motherboard Layout

(Note) Thechipislocatedonthebackofthemotherboard.

jOnly for GA-Z87N-WIFI.

kOnly for GA-H87N-WIFI.

- 8 -

DVI-I

GA-Z87N-WIFI/GA-H87N-WIFI Motherboard Block Diagram

Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications."

PS/2 KB/Mouse

COM

LPC

Bus

LGA1150

CPU

PCI Express Bus

CPUCLK+/-(100MHz)

PCIe CLK

(100MHz)

1 PCI Express x16

x16

DMI 2.0

FDI

DDR31600/1333MHz

Dual Channel Memory

LAN1

RJ45

PCI Express Bus

PCIe CLK

(100MHz) Intel® GbE

LAN

Dual BIOS

6 USB 3.0/2.0

4 SATA 6Gb/s

4 USB 2.0/1.1

Intel® Z87 j

Intel® H87 k

iTE®

Super I/O

jOnly for GA-Z87N-WIFI.

kOnly for GA-H87N-WIFI.

Center/Subwoofer Speaker Out

Line Out

MIC

Line In

S/PDIF Out

Side Speaker Out

Rear Speaker Out

CODEC

HDMI

LAN2

RJ45

Atheros®

GbE LAN

- 9 -

Hardware Installation

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damagedasaresultofelectrostaticdischarge(ESD).Priortoinstallation,carefullyreadtheuser's

manual and follow these procedures:

•Priortoinstallation,makesurethechassisissuitableforthemotherboard.

•Priorto installation, do notremoveorbreak motherboard S/N(SerialNumber)sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•Whenconnectinghardwarecomponentstotheinternalconnectorsonthemotherboard,make

sure they are connected tightly and securely.

•Whenhandlingthemotherboard,avoidtouchinganymetalleadsorconnectors.

•Itisbesttowearanelectrostaticdischarge(ESD)wriststrapwhenhandlingelectroniccom-

ponentssuchasamotherboard,CPUormemory.IfyoudonothaveanESDwriststrap,keep

yourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Priortoinstalling themotherboard,pleasehave itontopofanantistaticpadorwithinan

electrostatic shielding container.

•Beforeunpluggingthepowersupplycablefromthemotherboard,makesurethepowersupply

has been turned off.

•Beforeturningonthepower,makesurethepowersupplyvoltagehasbeensetaccordingto

the local voltage standard.

•Beforeusingtheproduct,pleaseverifythatallcablesandpowerconnectorsofyourhardware

components are connected.

•Topreventdamagetothe motherboard, do not allowscrewstocomeincontactwith the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

Hardware Installation

- 10 -

1-2 ProductSpecications

CPU

Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/

Intel® Core™ i3 processors/Intel® Pentium® processors/

Intel® Celeron® processors in the LGA1150 package

(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)

L3 cache varies with CPU

Chipset Intel® Z87j/H87k Express Chipset

Memory 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

 * DuetoaWindows32-bitoperatingsystemlimitation,whenmorethan4GBofphysical

memoryisinstalled,theactualmemorysizedisplayedwillbelessthanthesizeof

the physical memory installed.

Dual channel memory architecture

SupportforDDR31600/1333MHzmemorymodules

Support for non-ECC memory modules

SupportforExtremeMemoryProle(XMP)memorymodules

(GotoGIGABYTE'swebsiteforthelatestsupportedmemoryspeedsandmemory

modules.)

Onboard

Graphics

Integrated Graphics Processor:

 - 1xDVI-Iport,supportingamaximumresolutionof1920x1200

 - 2xHDMIports,supportingamaximumresolutionof4096x2160

 * SupportforHDMI1.4aversion.

- Maximum shared memory of 1 GB

Audio Realtek® ALC892 codec

HighDenitionAudio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN Intel®GbELANchip(10/100/1000Mbit)(LAN1)

Atheros®GbELANchip(10/100/1000Mbit)(LAN2)

 * Teamingisnotsupported.

Wireless

Communication

module

Wi-Fi802.11b/g/n,supporting2.4GHzSingle-Band

Bluetooth4.0,3.0+HS,2.1+EDR

Expansion Slots 1xPCIExpressx16slot,runningatx16

(ThePCIEX16slotconformstoPCIExpress3.0standard.)

1 x mini-PCI Express slot for the wireless communication module

Storage Interface Chipset:

- 4 x SATA 6Gb/s connectors supporting up to 4 SATA 6Gb/s devices

 - SupportforRAID0,RAID1,RAID5,andRAID10

jOnly for GA-Z87N-WIFI.

kOnly for GA-H87N-WIFI.

- 11 -

Hardware Installation

USB Chipset:

 - Upto4USB2.0/1.1ports(2portsonthebackpanel,2portsavailablethrough

theinternalUSBheader)

 - Upto6USB3.0/2.0ports(4portsonthebackpanel,2portsavailablethrough

theinternalUSBheader)

Internal

Connectors

1x24-pinATXmainpowerconnector

1x4-pinATX12Vpowerconnector

4 x SATA 6Gb/s connectors

1 x CPU fan header

1 x system fan header

1 x front panel header

1 x front panel audio header

1 x USB 3.0/2.0 header

1 x USB 2.0/1.1 header

1 x serial port header

1 x S/PDIF Out header

1 x Clear CMOS jumper

Back Panel

Connectors

1 x PS/2 keyboard/mouse port

2 x HDMI ports

2 x antenna connectors

1 x DVI-I port

4 x USB 3.0/2.0 ports

2 x USB 2.0/1.1 ports

2 x RJ-45 ports

1 x optical S/PDIF Out connector

5xaudiojacks(Center/SubwooferSpeakerOut, Rear Speaker Out, Line In,

LineOut,MicIn)

I/O Controller iTE® I/O Controller Chip

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU/System fan speed control

 * Whetherthefanspeedcontrolfunctionissupportedwilldependonthecooleryou

install.

BIOS 2x64Mbitash

Use of licensed AMI EFI BIOS

Support for DualBIOS™

PnP1.0a,DMI2.0,SMBIOS2.6,ACPI2.0a

Hardware Installation

- 12 -

Unique Features Support for Q-Flash

SupportforXpressInstall

Support for APP Center

 * AvailableapplicationsinAPPCentermaydifferbymotherboardmodel.Supported

functionsofeachapplicationmayalsodifferdependingonmotherboardspecica-

tions.

- @BIOS

- EasyTune

- EZ Setup

- Smart TimeLock

- USB Blocker

Support for ON/OFF Charge

Support for Wi-Fi Share

Support for Cloud Station

Bundled

Software

NortonInternetSecurity(OEMversion)

Intel® Rapid Start Technology

Intel® Smart Connect Technology

Intel® Smart Response Technology

Intel® Small Business Advantage k

Intel® Wireless Display

Operating

System Support for Windows 8/7

Form Factor Mini-ITXFormFactor;17.0cmx17.0cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

* PleasevisittheSupport & Downloads\UtilitypageonGIGABYTE'swebsitetocheckthesupportedoperatingsystem(s)

for the software listed in the "Unique Features" and "Bundled Software" columns.

kOnly for GA-H87N-WIFI.

- 13 -

Hardware Installation

1-3 Installing the CPU and CPU Cooler

1-3-1 Installing the CPU

A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•LocatethepinoneoftheCPU.TheCPUcannotbeinsertediforientedincorrectly.(Oryoumay

locatethenotchesonbothsidesoftheCPUandalignmentkeysontheCPUsocket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•DonotturnonthecomputeriftheCPUcoolerisnotinstalled,otherwiseoverheatinganddamage

of the CPU may occur.

•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card,memory,harddrive,etc.

Notch

Alignment KeyAlignment Key

Notch

LGA1150 CPU

LGA1150 CPU Socket

Pin One Corner of the CPU Socket

Triangle Pin One Marking on the CPU

Hardware Installation

- 14 -

B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.

Step 1:

Gently press the CPU socket lever handle down

andawayfromthesocketwithyournger.Then

completely lift the CPU socket lever and the metal

load plate/plastic cover will be lifted as well.

Step 2:

HoldtheCPUwithyourthumbandindexngers.

AligntheCPUpinonemarking(triangle)withthe

pinonecorneroftheCPUsocket(oryoumayalign

theCPUnotcheswiththesocketalignmentkeys)

and gently insert the CPU into position.

Step 4:

Finally,securetheleverunderitsretentiontabto

complete the installation of the CPU.

NOTE:

HoldtheCPUsocketleverbythehandle,nottheleverbaseportion.

•Before installing the CPU, make sure to turn off the computer and unplug the power cord from

the power outlet to prevent damage to the CPU.

•To protect the socket contacts, do not remove the protective plastic cover unless the CPU is

inserted into the CPU socket. Save the cover properly and replace it if the CPU is removed.

Step 3:

OncetheCPUisproperlyinserted, carefully

replace the load plate. When replacing the load

plate,makesurethefrontendoftheloadplate

is under the shoulder screw. Then press the CPU

socket lever. The protective plastic cover may

pop off from the load plate during the process of

engagingthelever.Removethecover.(Savethe

cover properly and always replace it when the

CPUisnotinstalled.)

- 15 -

Hardware Installation

1-3-2 Installing the CPU Cooler

FollowthestepsbelowtocorrectlyinstalltheCPUcooleronthemotherboard.(Thefollowingprocedureuses

Intel®boxedcoolerastheexamplecooler.)

Use extreme care when removing the CPU cooler because the thermal grease/tape between the CPU

cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

Step 5:

Aftertheinstallation,checkthebackofthemoth-

erboard. If the push pin is inserted as the picture

aboveshows,theinstallationiscomplete.

Step 6:

Finally, attach the power connectoroftheCPU

coolertotheCPUfanheader(CPU_FAN)onthe

motherboard.

Step 1:

Apply an even and thin layer of thermal grease on

the surface of the installed CPU.

Step 2:

Beforeinstallingthecooler,notethedirectionofthe

arrow sign onthemalepushpin.(Turningthe

push pin along the direction of arrow is to remove

thecooler,onthecontrary,istoinstall.)

Step 3:

PlacethecooleratoptheCPU,aligningthefour

push pins through the pin holes on the mother-

board. Push down on the push pins diagonally.

Step 4:

You should hear a "click" when pushing down each

push pin. Check that the Male and Female push

pins are joined closely.

(RefertoyourCPUcoolerinstallationmanualfor

instructionsoninstallingthecooler.)

Male

Push Pin

Female

Push Pin

The Top

of Female

Push Pin

Direction of

the Arrow Sign

on the Male

Push Pin

Hardware Installation

- 16 -

1-4 Installing the Memory

DDR3_1

DDR3_2

DuetoCPUlimitations,readthefollowingguidelinesbeforeinstallingthememoryinDualChannelmode.

1. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.

2. WhenenablingDualChannelmodewithtwomemorymodules,itisrecommendedthatmemoryof

thesamecapacity,brand,speed,andchipsbeusedforoptimumperformance.

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity,brand,speed,andchipsbeused.

(GotoGIGABYTE'swebsiteforthelatestsupportedmemoryspeedsandmemorymodules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

Ifyouareunabletoinsertthememory,switchthedirection.

1-4-1 DualChannelMemoryConguration

This motherboard provides two DDR3 memory sockets and supports Dual Channel Technology. After the memory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual

Channel memory mode will double the original memory bandwidth.

The two DDR3 memory sockets are divided into two channels and each channel has one memory socket as

following:

Channel A: DDR3_1

Channel B: DDR3_2

- 17 -

Hardware Installation

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are

not compatible to each other or DDR DIMMs. Be sure to install DDR3 DIMMs on this motherboard.

Notch

DDR3 DIMM

ADDR3memorymodulehasanotch,soitcanonlytinonedirection.Followthestepsbelowtocorrectlyinstall

your memory modules in the memory sockets.

Step 1:

Note the orientation of the memory module. Spread the retaining clips

at both ends of the memory socket. Place the memory module on the

socket.Asindicatedinthepictureontheleft,placeyourngerson

thetopedgeofthememory,pushdownonthememoryandinsertit

vertically into the memory socket.

Step 2:

The clips at both ends of the socket will snap into place when the

memory module is securely inserted.

Hardware Installation

- 18 -

1-5 Installing an Expansion Card

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.

2. Alignthecardwiththeslot,andpressdownonthecarduntilitisfullyseatedintheslot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. Afterinstallingallexpansioncards,replacethechassiscover(s).

6. Turnonyourcomputer.Ifnecessary,gotoBIOSSetuptomakeanyrequiredBIOSchangesforyourexpan-

sioncard(s).

7. Install the driver provided with the expansion card in your operating system.

Example: Installing and Removing a PCI Express Graphics Card:

PCI Express x16 Slot

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

•Installing a Graphics Card:

Gently push down on the top edge of the card until

it is fully inserted into the PCI Express slot. Make

sure the card is securely seated in the slot and

does not rock.

•Removing the Card:

Gently push back on the lever on the slot and then lift the card straight out from

the slot.

- 19 -

Hardware Installation

1-6 Back Panel Connectors

USB 2.0/1.1 Port

TheUSBport supports theUSB2.0/1.1 specication. Usethisportfor USBdevicessuchas aUSB

keyboard/mouse,USBprinter,USBashdriveandetc.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD

MasterAudioformats.Italsosupportsupto192KHz/24bit8-channelLPCMaudio

output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution

is4096x2160,buttheactualresolutionssupportedaredependentonthemonitorbeingused.

AfterinstallingtheHDMIdevice,makesuretosetthedefaultsoundplaybackdevicetoHDMI.

(Theitemnamemaydifferdependingonyouroperatingsystem.Thescreenshotbelowisfrom

Windows8.)

InWindows8,selectStart>ControlPanel>Hardwareand

Sound>Sound>Playback,setIntel(R)DisplayAudiotothe

default playback device.

Antenna Connector

Use this connector to connect an antenna.

Tighten the antenna cables to the antenna connectors and then

move the antenna to a place where the signal is good.

Hardware Installation

- 20 -

DVI-I Port

TheDVI-IportconformstotheDVI-Ispecicationandsupportsamaximumresolutionof1920x1200(the

actualresolutionssupporteddependonthemonitorbeingused).ConnectamonitorthatsupportsDVI-I

connection to this port.

USB 3.0/2.0 Port

TheUSB3.0portsupportstheUSB3.0specicationandiscompatibletotheUSB2.0/1.1specication.

UsethisportforUSBdevicesUsethisportforUSBdevicessuchasaUSBkeyboard/mouse,USBprinter,

USBashdriveandetc.

RJ-45 LAN Port (LAN1)

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

Center/Subwoofer Speaker Out Jack (Orange)

Usethisaudiojacktoconnectcenter/subwooferspeakersina5.1/7.1-channelaudioconguration.

Rear Speaker Out Jack (Black)

Thisjackcanbeusedtoconnectfrontspeakersina4/5.1/7.1-channelaudioconguration.

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.

Beforeusingthisfeature,ensurethatyouraudiosystemprovidesanopticaldigitalaudioinconnector.

Line In Jack (Blue)

Thedefaultlineinjack.Usethisaudiojackforlineindevicessuchasanopticaldrive,walkman,etc.

Line Out Jack (Green)

The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used

toconnectfrontspeakersina4/5.1/7.1-channelaudioconguration.

Mic In Jack (Pink)

The default Mic in jack. Microphones must be connected to this jack.

Activity LED

Connection/

Speed LED

LAN Port

Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

Activity LED:

State Description

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

Activity LED

Connection/

Speed LED

LAN Port

Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

Activity LED:

State Description

Blinking Data transmission or receiving is occurring

On No data transmission or receiving is occurring

Triple-DisplayCongurationsfortheOnboardGraphics:

Triple-displaycongurationsaresupportedafteryouinstallmotherboarddriversinOS.Onlydual-display

congurationsaresupportedduringtheBIOSSetuporPOSTprocess.

RJ-45 LAN Port (LAN2)

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

Page is loading ...

Gigabyte GA-H87N-WIFI Owner's manual

Brand: Gigabyte

Model: GA-H87N-WIFI

Category: Server/workstation motherboards

Type: Owner's manual

This manual is also suitable for

GA-Z87N-WIFI

Download PDF

report

Gigabyte GA-H87N-WIFI Owner's manual

This manual is also suitable for

Gigabyte GA-H87N-WIFI Owner's manual

Related papers

Other documents