ONER GPS Vehicle Tracker
User Manual
Command List
8
ADMINT1,T2,T3#****** ******=000000, T1,T2,T3=phone No.,Max 16 digits
When set one No. only, others can be blank
I.E.: ADMIN087772312#000000 Set 1 admin.NO
ADMIN087772312,083112775#000000, Set 2 Admin No
DISx#****** (option) ******=000000. x=0,close (default)
(Distance interval) x=1-65535meter I.E.:DIS100#000000
Command(no password):DISX
Real Time Tracking
To do real time tracking to car, and get location info, map link or detail address.
Command Description
Command Description
CHK#****** To get current location info.******=000000
(live track) Reply: ID=21451100,ACC=ON, 23.163678N,113.313711E,
0.0KM/H,10KM,2015.08.11 08:05
MAP#****** To get map link of current location .******=000000
(Google map link inquiry) Reply:http://maps.google.com/maps?f=q&hl=en&q=6.46022,3.314953
&ie=UTF8&z=16&iwloc=addr&om=1
Command(no password): MAP
ADD#****** To get detail address, first need to set device to work
(Detail address inquiry) in the tracking system.
******=000000. I.E.: ADD#000000
Command(no password):ADD
Alert Setting
To set multiple alerts and notification No. When alert actives, alert message will be sent to these numbers.
SOSF,T1,T2,T3#****** When Alert active, alert message will be sent to these No. .
(Alert Notificiation No) ******=000000. T1,T2,T3=phone No,max 16 digits
F=0, close (default), F=1,active;when set 1 number
only, others enter 0,I.E.:SOS1,087234551,0,0#000000
Command (no password) SOSF,T1,T2,T3
SDx#****** when car is moving over the speed limit, alert active
(Overspeed alert) ******=000000 . x=0 close , x=30-200km/h
I.E.: SD80#0000000, Speed limit: 80KM/H
Command (no password) SDx
MOVx#****** Set area (current location as central point, set radius),
(Movement alert) When the car leaves this area, alert active.
******=000000. x=0,close; x=1, 30m; x=2, 50m;
x=3,100m x=4, 200m; x=5, 300m;x=6, 500m;
x=7, 1000m;x=8, 2000m
I.E.: MOV3#000000 Command(no password) MOVx
CPAx#****** When external power is cut, alert active.
(Power cut alert) ******=000000.x=0, close (default),x=1,active;
I.E.:CPA1#000000 Command(no password) CPAx
IN;Lat;lon;radius#****** Set central point and raduis as fence, when enter this fence,
(Arriving fence alert) alert active. ******=000000, lat=latitudelon=longitude,
radius=0-999KM I.E.:IN;113.62637;23.22361;1#000000
Command(no password) IN;lat;lon;radius
OUT;Lat;lon;radius#****** Set central point and raduis as fence, when leaves this
(Leaving fence alert) fence, alert active. ******=000000, lat=latitude,lon=longitude
radius=0-999KM. I.E.:OUT;113.62637;23.22361;1#000000
Command(no password) OUT;lat;lon;radius