#10 Wood Screw (32) Back Panel (1)
Legs (2)
Table top (1)
3/8"-16 Dog Nut Screw (4)
Allen Wrench (2)
Planner Student Desk Quick Installation Guide
Required for Installation
Step 1 Loosely attach legs and modesty panel
with connector bolts. (nger tight)
Step 2 Flip table over on a smooth, clean
surface with the bottom facing up.
Step 3 Align frame assembly with pilot holes
in top and use supplied #10 wood
screws to loosely attach frame
assembly.
Step 4 Using supplied Allen Wrench go back
and tighten connector bolts.
Step 5 Tighten #10 wood screws into table.
Adjust table to desired height using
supplied Allen Wrench. Carefully
ip the desk over, desk is now
ready to be used.
Instructions
Connector Bolt (4)
MODELS
Form# 179859
Pilot Holes
01270 01280
01272 01284
01273 01285
01274 01286
01275 01287
01276 01288
01278 01289
01280 01290
Rev. 08/2010
/
