2. ROOMS TO GO
  3. 74066121

ROOMS TO GO 74066121 Assembly Instructions

  • Hello! I'm your chat assistant. I've reviewed the assembly instructions for the GL2AQ-38727-145 table. This document outlines the parts included, provides step-by-step guidance for assembly, and includes important warnings to ensure the table is put together correctly. I'm ready to answer any questions you may have about assembling the table based on these instructions.
  • What should I do before starting the assembly?
    What to do if some parts are missing or damaged?
    What kind of washing liquid should not be used to clean the product?
    What type of tightening should be done for bolts at first step?
    How many people are needed to turn the table right side up?
R
Assembly Instructions
Identify all parts packed in the carton against the parts list. Remove all protective
materials. Place parts on a non-abrasive surface to avoid scratching.
Do Not Attempt Assembly If Any Parts Are Missing Or Damaged.
Warning: Please do not use acid or alkaline washing liquid to clean the product.
Assemble the product as shown below, step-by-step.
Part List
NO. SKETCH DESCRIPTION QTY
Bolt
(M6*20)
BB Wrench 1
STEP 1
Hand Tighten Nut 3-4 Revolutions Only,After Attached All The Bolts,Adjust All
The Part At Correct Position,Then Tighten All The Bolt And Nut.Do Not Over
Tighten.
AA
A
B
GL2AQ-38727-145
Made in China
AA
12
NO.
A
B
SKETCH
DESCRIPTION
Leg
Table Top
QTY
4
1
C
Foot Glider
4
STEP 2
Need two people turn the table right side up.Adjust the pre-installed foot glider(C)
at the end of each table leg until the table is level with the ground Securely, Your
table is ready for use.
C
2
/