Lupo MOVIELIGHT 300 DUAL COLOR PRO User manual
- Category
- Stroboscopes & disco lights
- Type
- User manual
Movielight
300 PRO
User Manual
WARNING:
SAFETY PRECAUTIONS:
CAUTION - BURN HAZARD - HOT PARTS
NOTICE - EQUIPMENT OVERHEATING RISK
FINAL DISPOSAL
MAINTENANCE AND CARE
WARRANTY
12 months
12 months
Thanks for having purchased Lupo products. All the products are made in Italy and all the efforts
have been put to keep the quality standards high. We hope this product can help you in your job and
make your life easier as a professional. We also hope you will enjoy its use and we would be happy to
receive your feedback about it.
•
•
•
•
•
•
•
•
Instructions
Package Contents
ATTENTION:
Movielight 300 PRO
Parabolic Reector
AC Power
Cord Cable
Getting Started
Movielight 3000 PRO
1 2 3
OK
CONTROL PANEL
OPERATION MODE
Functioning
« OK » 3 DIMMERCOLOR*, DMX (ON/OFF)
MENUThe indicator « » shows the selected function.
- DIMMER: « » 1« » 20 to 100%.
- COLOR*: Function available only the Dual Color version*.
« » 1« » 22800K to 6500K.
- DMX (ON/OFF):
DMX SEL
« » 1« » 2
- MENU (ON/OFF):
MENU SEL
« » 1« » 2
Manual Operation
1
3
OK 3 DMX ADDRESS, DMX (ON/OFF) RESET
DEVICEThe indicator « » shows the selected option.
- DMX ADDRESS: « » 1« » 21 to 512.
- DMX (ON/OFF):
MANUAL OPERATION,MANUAL SEL 3
« » 1« » 2
DMX Operation
2
« OK » 3
ADVANCED FEATURES
1 2
MANUAL OPTIONS / DMX OPTIONS / DEVICE SETTINGS / RESET DEVICE.
3
« » 1« » 2MONOCOLOR / CCT MODE* EFFECT
MODE.
« OK » 3
*The mode name changes according to the Dayled model (monocolor or dual color).
EFFECT MODE:
1. TELEVISION BW
2. STROBE/TELEVISION/PAPARAZZI/LIGHTINING
Strobe: The strobe effect is applied to the last set parameters of the CCT or MONOCOLOR mode.
« OK » 3DIMMER, FREQUENCY, STROBE (ON/OFF)
« » 1« » 2
- DIMMER: « » 1« » 20 to 100%.
- FREQ: « » 1« » 2 1 Hz to 25 Hz.
- STROBE (ON/OFF):
STROBE ON « » 1 « » 2
Television: The Television effect is applied to the last set parameters of the CCT or MONOCOLOR
mode.
« OK » 3DIMMER, RANGE, FREQUENCY, TELEVISION (ON/OFF)
« » 1« » 2
- DIMMER: « » 1« » 20 to 100%.
- RANGE:
2800 K - 4000 K 5200 K - 6500 K
4000 K - 5200 K2800 K - 6500 K
- FREQ: « » 1« » 2 1 Hz to 25 Hz.
- TELEVISION (ON/OFF):
TELEVISION ON « » 1« » 2
Paparazzi: The Paparazzi effect is applied to the last set parameters of the CCT or MONOCOLOR
mode.
« OK » 3DIMMER, INT., BULB, PAPARAZZI (ON/OFF)
« » 1« » 2
Manual Options
1
- DIMMER: « » 1« » 20 to 100%.
- INT.: « » 1« » 2light intensity from 0 to 100%.
- BULB:
- PAPARAZZI (ON/OFF):
PAPARAZZI ON « » 1« » 2
Lightning: The Lightning effect is applied to the last set parameters of the CCT or MONOCOLOR mode.
« MODE » 3DIMMER, CT, INT., LIGHTNING (ON/OFF)
« » 1« » 2
- DIMMER: « » 1« » 20 to 100%.
- CT: « » 1« » 2colour temperature (CCT) values from 2800K
to 6500K.
- INT.: « » 1« » 2light intensity from 0 to 100%.
- LIGHTNING (ON/OFF):
LIGHTNING ON « » 1« » 2
DMX Options
2
« » 1« » 2MONOCOLOR / CCT MODE*
EFFECT MODE.
« OK » 3
*The mode name changes according to the Dayled model (monocolor or dual color).
EFFECT MODE:
« OK » 3STROBEAvailable only in manual operation.
ON « OK » 3
Strobe: The strobe effect is applied to the last set parameters of the CCT or MONOCOLOR mode.
« OK » 3DIMMER, FREQUENCY, STROBE (ON/OFF)
« » 1« » 2
- DIMMER: « » 1« » 20 to 100%.
- FREQ: « » 1« » 2 1 Hz to 25 Hz.
- STROBE (ON/OFF):
OFF 1
« OK » 3
Device Settings
3
« » 1« » 2DMX OPERATION / DMX BIT / DMX SIGNAL
LOSS.
« OK » 3
DMX BIT:
« OK » 3DMX BIT
« » 1« » 28bit 16bit.
« OK » 3See protocol DMX.
8bit: 16 bit:
DMX SIGNAL LOSS:
DMX SIGNAL LOSS 3
« » 1« » 2BLACK OUT /
SETTINGS LAST/ SETTINGS 1min.
YES 2
« OK » 3
YES 2
« OK » 3
FACTORY SETTINGS: Mode:- DMX: - Bit:- DMX signal loss:
Display:- Filter:- Linearization:
Reset Device
4
« OK » 3
Black out: Settings Last:
Settings 1min:
« OK » 3DEVICE SETTINGS
« » 1« » 2DISPLAY / FILTER / LINEARIZATION
« OK » 3
« » 1« » 2
« OK » 3
Display: 30sec / 1min / ALWAYS ON
Filter: FULL SPEED / NORMAL SPEED / HIGH SPEED / LOW SPEED.
Linearization: LINEAR / EXPONENTIAL / LOGARITHMIC
- Linear:
- Exponential:
- Logarithmic:
DMX Channel Protocol - 8 bit
DMX Channel Protocol - 16 bit
MODE
MODE
CHANNELS USED
CHANNELS USED
CHANNEL POSITION
CHANNEL POSITION
DMX Protocol
*Channel in use only the Dual Color version.
Lupo srl
Phone:e-mail:website:
Accessories
COMPLETE KIT OF V-MOUNT BATTERY POWER SUPPLY FOR MOVIELIGHT 300 PRO.
D – Tap cable (cod.313)
V – Mount clamp (cod.320)
.
Battery charger (cod.272)
160 Wh battery 14.8 V (cod.421)
-“EXIT” « OK » 3
- "BACK" « OK » 3
Advanced Features Menu e Sub - Menus
NOTE: After 1 minute of inactivity in the menu, the device automatically exits and returns to
the last selected mode.
EXIT
MANUAL OPTIONS DEVICE SETTINGS RESET DEVICE
EXIT
INFO
DMX OPTIONS
DMX
OPERATION
FW
DISPLAY
OPTIONS
DMX BIT
FILTER
MENU VIEW
FREQUENCY
LINEARIZATION
DMX SIGNAL
LOSS BACK
EXIT
BACK
BACK
EXIT
CCT MODE
EFFECT
MODE
EFFECT
MODE
STROBE
TELEVISION
TELEVISION
PAPARAZZI
PAPARAZZI
LIGHTNING
LIGHTNING
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Lupo MOVIELIGHT 300 DUAL COLOR PRO User manual
- Category
- Stroboscopes & disco lights
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Rotolight Titan Cinematic Lighting User manual
-
Chauvet Onair User manual
-
ProLights ECLPANELTWC User manual
-
Fiilex Q5 User guide
-
-
-
-
NANLITE FS-150B User manual
-
Genaray PX2-RGB User manual
-
ETC fos/4 Series User manual
