Paragon Outdoor GZT634 Operating instructions

Brand: Paragon Outdoor

Model: GZT634

Type: Operating instructions

Paragon Outdoor GZT634 is a premium gazebo designed for easy assembly and years of enjoyment. Its sturdy construction and thoughtful design make it a perfect addition to any outdoor space.

The gazebo features a spacious 10' x 10' footprint, providing ample room for relaxation and entertaining. The frame is made of durable aluminum, ensuring stability and longevity. The roof is made of a high-quality fabric canopy that is water-resistant and UV-protected, offering shelter from the elements.

Assembly is straightforward and can be completed by three people in about two hours. The gazebo is designed to be portable, so you can move it to different locations as needed. It also comes with ground stakes for added stability.

Paragon Outdoor GZT634 is a premium gazebo designed for easy assembly and years of enjoyment. Its sturdy construction and thoughtful design make it a perfect addition to any outdoor space.

of 18

www.stcny.com

10’08”

9’7”

10’08”

9’7”

6’10”

max. 10’

Systems Trading Corporation

Customer service: (877)782 4482

Assembly Instructions

Gazebo GZT634

of 18

www.stcny.com

Introduction

Thank you for purchasing the Gazebo GZT634.

When properly assembled and maintained, this gazebo will provide many years of enjoyment! These instruc-

tions include helpful hints and important information needed to safely assemble and properly maintain the

gazebo. Please read these instructions completely before you begin.

Our patented gazebo has been designed for easy assembly. All steps can be completed by a team of three

people. The assembly should take about two hours.

Before Starting Assembly:

CAREFULLY READ ALL THE INSTRUCTIONS BEFORE YOU BEGIN AND FOLLOW THE STEPS IN THE

ORDER THEY ARE PRESENTED.

1. Make sure you have all the necessary parts:

Compare the contents of the cartons to the List of Parts. If any parts are missing or damaged, or you

have any questions, please contact Customer service: (877)782 4482 before beginning assembly.

2. Lay the parts out in separate staging areas:

The List of Parts has the corresponding step number referenced to each part. We recommend that

while you go through the list, make staging areas for each step and place the parts necessary for each

 stepintheseareas.Thiswillsaveyoutimeandeortduringassembly.

3. Select a Location:

 Whenselectingalocationforyourgazebo,aatlevelareaisessentialandifpossiblewithproperwater

drainage and easy access to power and water, if neccessary. Choose a sunny, level position away from

overhanging trees and power lines and protected from the wind as much as possible. Locate under

ground pipes or cables before preparing the site or anchoring the gazebo.

 Note:Youmayassemblethegazeboonahardlevelsurfaceandmoveittoitsnallocationwhen

 nished.Makesurethattherearenoobstaclesbetweentheassemblyareaandthenalposition.

4. Prepare a Foundation:

After choosing a location, proper preparation of the site is recommended. The site must be level.

If the site is not level, create a base slightly larger than the outside dimensions of the gazebo using a

 perimeteroftwobyfourslledwitheithersoil,sodorgravel.Makesurethebaseissquareby

measuring the diagonals from both directions and making sure they are equal. The gazebo is secured

with pegs into holes cast with concrete. If you decide to have a concrete base, it is best to contact a

 reliablecontractortomakesureitisatandlevel.Makesureyouhavecheckedwithyourlocal

authorities regarding any required building permits.

5. Make sure you have the proper tools:

 • TapeMeasure  • 2SmallStepLadders

 • WorkGloves  • WoodenMallet

• Safety goggles • Scissors

• Phillips Screwdriver • Liquid soap or WD40 Lubricant

• Spirit Level • Hex Key (included)

NOTE: A cordless drill with Phillips head bit is highly recommended but not essential.

of 18

www.stcny.com

6 5

Safety Advice

•

The gazebo must be positioned and xed on a at

level surface.

•

Dispose of all plastic bags safely. Keep them out of

the reach of children.

•

Keep children and pets away from the

assembly area until the work is completed.

•

Always wear shoes, gloves and safety goggles

when working.

•

Do not touch overhead power lines with the alu-

minium proles.

•

Do not attempt to assemble the gazebo in windy or

wet conditions.

•

Do not position your gazebo in an area exposed to

excessive wind.

•

If using power tools or a ladder, always follow the

manufacturers safety instructions.

•

Hot items such as recently used grills, blowtorches

etc. must not be stored in the gazebo.

•

Make sure the gazebo complies with local building

codes.

General Order of Assembly

Step 1: Assembling the Corner proles

Step 2: Assembling the Roof Proles

Step 3: Attaching the Roof Proles to the Corner Proles

Step 4: Securing the gazebo to the ground

Step 5: Attaching the Corner Roof Gables

Step 6: Attaching the Center Roof Gables

Step 7: Placing the Canopy

Table of Contents

ntroduction............................................................................ 2

Table of Contents.................................................................. 3

List of Parts........................................................................... 4

Step 1 AssemblingtheCornerProles................................. 6

Step 2AssemblingtheRoofProles.................................... 8

Step 3AttachingtheRoofProlestoCornerProles............... 9

Step 4 Securing the Gaze

o the Ground.......................... 11

Step 5

Attaching the Corner Roof Gables.

............................... 12

Step 6 Attaching the Center Roof Gables................................ 15

Step 7 Placing the Canopy..................................................... 16

of 18

www.stcny.com

Fabric canopy

No. Part Qty Step

6A 2

7 4

8 4

5,7

10 1

11 1

12 1

No. Part Qty Step

1 4

2 4

3 4

4A 4

4B 4

5 4

6 2

The gazebo is shipped in two cartons. These cartons are heavy. Be careful when lifting them.

Wear proper safety gear including work shoes, gloves and goggles.

Thepartsareidentiedbyremovablestickers.Placeallthepartsforeachstepinstagingareas,

checking that you have all parts as you go. If any parts are missing or damaged, contact STC customer

service before beginning assembly:

Customer service: (877)782 4482

List of Parts

of 18

www.stcny.com

1/4” x 30

8.0 x 70mm

1/4” x 15

1/4” 1/4”

1/4” x 35

No. Part Qty Step

17 16

1,5,6

18 4

19 1

20 12

21 12

No. Part Qty Step

13 32

14 24

1,2,5

15 8

5,6

16 8

1,2

We included some extra screws and bolts for your convenience.

of 18

www.stcny.com

1 1 1 1

1.A

Assembling the Corner Proles

Placeallthepartsonalevelsurface.Makesurethepiecesareinthecorrect

positions before assembling.

Carefully follow the order of assembly to ensure an easy installation.

Wear proper safety gear including work shoes, gloves and goggles.

Placecornerproles(1)paralleltoeachothertheground.Attachroofconnectors(16)toeachcorner

proleusingbolts(14).Prepareallfourproles.

STEP 1

Components

x 4

1 1

Cornerprole(1)

Bottom view - facing the ground

has two screw holes to connect

to support plate (3)

Cornerprole(1)

Top view - facing the roof

has protrusion to connect

to roof connector (16)

Cornerprole(1)

x 4

Support plate (3)

x 4

Roof connector (16)

x 4

Support frame (2)

x 4

Bolt (17)

x 8

1/4” x 30 1/4” x 15

Bolt (14)

x 4

of 18

www.stcny.com

1 1 1 1

1.B

Slidesupportframes(2)overlowerendofcornerproles(1).

Attachsupportplates(3)tocornerprolesasshown,usingtwobolts(17)for

each plate.

Leavesupportframes(2)about10”overlowerendofcornerproles(1)untilstep4.

x 4

of 18

www.stcny.com

2.B

2.C

Assembling the Roof Proles

Connecteachroofprole(4A)tooneroofprole(4B)byslidingprotruding

partsonprole(4A)intoopensideofprole(4B)asshown.

Fasten with bolts (14).

STEP 2

Roofprole(4A)

x 4

Roofprole(4B)

x 4

Wicker strap (18)

x 4

Attach roof connectors (16) to each

roofprole(4A)throughholeinwicker

strap, as shown, using bolts (14).

Create four sets.

1/4” x 15

Wrap wicker strap (18) around

connectionedgesofroofproles(4A,

4B) as shown and fasten.

Bolt (14)

x 12

Roof connector (16)

x 4

Components

x 4

2.A

of 18

www.stcny.com

Attachonelongroofproleset(4A+4B)totwocornerproles(1)asshown.

Fasten with four bolts (13) on each side.

Repeat step 3.A to create two sets.

3.A

Attaching Roof Proles to Corner Proles

STEP 3

NOTE:Theendofprole(4B)protrudesfrom

cornerprole(1)thedistanceofit’sownwidth.

1/4” x 35

Bolt (13)

x 32

Components

x 2

NOTE:Theendofprole(4B)protrudesfrom

cornerprole(1)thedistanceofit’sownwidth.

of 18

www.stcny.com

3.B

IMPORTANT: After this step you should place the

gazebo frame in its desired location.

Makesureallcornersaresquaredat90degrees.

Usingatleast3people,attachthetwootherroofprole

sets(4A+4B)tocornerproles(1),connectingallfour

cornerproles(1).

Fasten with four bolts (13) on each side.

of 18

www.stcny.com

4.A

STEP 4

Fasten the gazebo frame to the ground, using three spikes (21) for each support plate.

Lower support frames (2) to cover support plates (3).

Securing the Gazebo to a Concrete Floor

or Wood Deck

Optional

Wood Bolts, washers x 12

to be purchased by user

Concrete Floor:

Usinganelectricconcretedrill,drillholesintotheconcreteoor,correspondingto

the holes in support plates (3).

2. Insert concrete bolts (20) into the holes and hammer into place, using a mallet.

3. Fasten concrete bolts with washers and nuts.

Wood Deck:

Usinganelectricwooddrill,drillholesintothewoodoor,correspondingtotheholes

in support plates (2).

Insert wood screws with washers (not supplied) into the holes and fasten, using an

electric screw driver.

NOTE: After securing the gazebo to the ground, we highly recommend

llingthecornerproles(1)with2bags(20LBseach)ofPeaGraveleach

for extra stability.

Securing the Gazebo to the Ground

Ground spike (21)

x 12

Concrete bolts, washers and nuts (20)

x 12

Components

GRAVEL

of 18

www.stcny.com

66A

Attaching the Corner Roof Gables

STEP 5

Top gable connector (10)

x 1

Insert roof gable connectors (7) into long end of roof

gableproles(5)andintotworoofgableextensions(6)

and two roof gable extension (6A), align drill holes and

fasten with bolts (14).

Prepare four sets.

5.A

Roof gable

connector (7)

x 4

Roofgableprole(5)

x 4

Roof gable

extension (6)

x 2 Roof gable

extension (6A)

x 2

Roof gable

extension(9)

x 2

IMPORTANT:

Theroofgableproles(5)havesmallprotrusions(springbuttons)underneath.The

end with the protrusions is connected to the top gable connector (10). The roof

gable extension (6A) has a small protrusion underneath which will snap into one of

theholesinroofgableextension(9)whilestretchingthecanopy.

x 4

Bolt (15)

x 4

Bolt (14)

x 8

Bolt (17)

x 4

1/4” x 15 1/4” x 30

Components

of 18

www.stcny.com

Connectoneroofgableprolesassembly(5,6)andoneroofgableprolesassembly(5,6A)to

top gable connector (10) until the small protrusion on their undersides snap into the holes on the

underside of top gable connector (10).

Usingatleasttwopeople,connectthetworoofgableproles(5,6)and(5,6A)toroofconnectors

(16)onoppositecornerproles(1).Fastenwithbolts(17,15)asshown.

5.B

5.C

ATTENTION:

The tunnels of top gable

connector (10) are marked, in order to

avoid mistakes when inserting the roof

gableproles.

of 18

www.stcny.com

6A6A

ATTENTION:

The tunnels

of top gable connector (10)

are marked, in order to avoid

mistakes when inserting the

roofgableproles.

Usingatleasttwopeople,slidetheothertworoofgableproles(5,6-5,6A)intotunnelsoftop

gable connector (10) until the small protrusion on their undersides snap into the holes on the

underside of top gable connector (10).

5.E

5.D

Connectthetworoofgableproles(5,6)

to roof connectors (12) on opposite corner

proles(1).

Fasten with bolts (17,15) as shown.

of 18

www.stcny.com

5.F

50”

46.4”

11.4”

8 8

Slideroofgableextension(9)overroofgableextensions(6A)untilthesmallprotrusiononits

undersidesnapsintothethirdholeontheundersideofroofgableextension(9).

Attaching the Center Roof Gables

STEP 6

Bolt (17)

x 4

Bolt (15)

x 4

Roofgableproles

(8)

x 4

Insert ends with push buttons of roof gable

proles(8)intomarkedtunnelsoftoproof

connector (10) until they snap into place.

6.A

IMPORTANT:Theroofgableproles(8)havesmallprotrusions(spring

buttons) underneath.

The end with the protrusions is connected to the top gable connector (10).

NOTE:Youwillneedtoextendprole(9)outwardstostretchtheroofcanopyinto

itsnalposition.

Components

of 18

www.stcny.com

10 8

6.B

Place the other ends of roof gable connectors (8)

intoroofconnectors(16)onroofproles(4B),align

drill holes and fasten with bolts (17,15).

Placing the Canopy

STEP 7

7.A

WARNING!!:Wheninsertingtheroofprolesintothefabricpocketsofthe

canopy,youMUSTusebothhandsholdingthelargepieceofrooffabricin

ordertostretchit.Don’ttrytostretchitandpullitjustbypullingthepockets!

It will tear the pockets as canopy fabric is not elastic by nature.

Place the upper fabric canopy (11) carefully over the higher part of roof gable

proles(5),stretchandslideprolesintofabricpocketsincanopy(11).

Use TWOhandstopullthefabricbackwarduntiltheroofproleslides

rmlyintothepocket.

Fabric Canopy (11)

x 1

Fabric Canopy (12)

x 1

VIEWFROMBELOW

Components

of 18

www.stcny.com

7.B

Tonishstretchingthecanopy,pressthepushbutton

inextensionprole(6A)andextendextensionprole

(9)asfaraspossibletotheoutsideuntilthepush

button snaps into place.

Do NOT try to stretch and pull the roof

fabric by pulling the pocket only.

This will tear the pocket, as canopy

fabric is not elastic by nature.

VIEWFROMBELOW

Using at least two people, place the large canopy (12) carefully over the small canopy (11) and two roof

gableproles(5,6)asshown.

Stretchthecanopyandslideprolesintofabricpocketsinlargecanopyrim(12).

Use TWOhandstopullthefabricbackwarduntiltheroofprolesslidermlyintothepockets.

VIEWFROMBELOW

of 18

www.stcny.com

WARNING :

In order to prevent possible damage to fabric and/ or structure, fabric

roof should be removed before wind storms, or major inclement weather events.

WARRANTY:

Warranty covers damage due to manufacturing defects only. Warranty does

notcoverweatherinicteddamage(ForceMajeure)and/or

damages caused by not following assembly instructions and adhering to

warnings in manual.

Systems Trading Corporation

Customer service: (877)782 4482

Paragon Outdoor GZT634 Operating instructions

Brand: Paragon Outdoor

Model: GZT634

Type: Operating instructions

Paragon Outdoor GZT634 is a premium gazebo designed for easy assembly and years of enjoyment. Its sturdy construction and thoughtful design make it a perfect addition to any outdoor space.

Download PDF

report

Paragon Outdoor GZT634 Operating instructions

Paragon Outdoor GZT634 Operating instructions

Related papers

Other documents