Barco iCon H600 Owner's manual

iCon H600
Barco
Brand
Barco
Model
iCon H600
Type
Owner's manual

Barco iCon H600: Captivating Visual Experiences

The Barco iCon H600, a high-performance projector, offers stunning visuals for a range of applications. With its WUXGA resolution, 6,000 ANSI lumens brightness, and 2000:1 contrast ratio, it delivers sharp, detailed images even in well-lit environments.

Equipped with a variety of inputs, including DVI, HDMI, and VGA, the iCon H600 seamlessly connects to various sources, making it suitable for presentations, conferences, and digital signage. It also features lens shift capabilities, allowing for flexible placement and easy image alignment.

The iCon H600's advanced features enhance its versatility. Its keystone correction ensures distortion-free images, while the built-in edge blending功能enables seamless multi-projector setups for panoramic displays.

Barco iCon H600: Captivating Visual Experiences

The Barco iCon H600, a high-performance projector, offers stunning visuals for a range of applications. With its WUXGA resolution, 6,000 ANSI lumens brightness, and 2000:1 contrast ratio, it delivers sharp, detailed images even in well-lit environments.

Equipped with a variety of inputs, including DVI, HDMI, and VGA, the iCon H600 seamlessly connects to various sources, making it suitable for presentations, conferences, and digital signage. It also features lens shift capabilities, allowing for flexible placement and easy image alignment.

The iCon H600's advanced features enhance its versatility. Its keystone correction ensures distortion-free images, while the built-in edge blending功能enables seamless multi-projector setups for panoramic displays.

Barco service bulletin
Serial Number: InfoT709
Date: 25/04/2007
Product: DVI and RGB input
Priority code*: D
A.
”Must” modification, Barco will provide t he necessary components to per form this mo difica tion
at no charge.
B.
Improves the reliability of the product.
C.
Improves the general working conditions of the product.
D.
For information only.
1. NEW GENERATION DVI & RGB INPUTS :
FIRMWARE COMPATIBILITY
1.1 Description
New generation DVI and RGB inputs
A new component (A/D converter) is used in the DVI input bo ards and in the RGB input
boards. The module part numbers and the spare numbers (...K) have not been changed
but the board numbers
have a higher index (this index will allow you to differentiate old
from new bo ards) :
Spare
number
Board
number
Index
Description Used in Projectors
R7640916K 03
D15/DVI Input kit
iQ, iD, Sim5
R7640917K 03
D15/DVI Input kit
iCon
R764850K 06
DVI input kit
WND 264
R764499K 02
RGB/Video input kit
iCon, S im5
In most of the cases, the projectors have to be updated with a new firmware version in
order to allow optimal operation of these new boards.
1.2 Firmware Compatibility
A must up gra de is needed in case of low com patib ility i.e. if normal op er-
ation is not guaranteed. An advised upgrade is needed in case of relative
high co mpatibility i.e. general opera tion is guaranteed but no t for ex otic
or low quality signals.
Barco nv Presentations
Noordlaan 5,
8520 Kuurne
www.barco.com
Page 1 of 2
Barco service bulletin
DVI input board
The table below gives an overview of the required firmware version when using the new
DVI input board in the different projectors. :
Projector Required
firmware version
Must/Advised
upgrade
Note
iQ G/R 350/500
(Pro
1
)series
V3.15
Must
This software and
thus this new
DVI board is not
compatible with the
iQ Pro projectors
fitted with the
old SBC’s ! See
InfoT640 for more
details
iD R600(+)
V1.31
Must
iCon H600 V1.31
Advised upgrade is not a
must but advised
iCon H250/400
V1.10
Advised upgrade is not a
must but advised
Sim5 (Plus/R)
V1.32
Must
WND 264 V1.01
Advised upgrade is not a
must but advised
RGB/Video input board
The table below giv
es an overview of the required firmware version whe n using the new
RGB input board in the different projectors. :
Projector Required
firmware version
Must upgrade
Note
iCon H600 V1.31
Must
must upgrade
to guarantee
e.g. proper YUV
processing
iCon H250/400
V1.10
Must
must upgrade
to guarantee
e.g. pro
per YUV
processing
Sim5 (Plus/R)
V1.32
Must
must upgrade
to guar
antee
e.g. proper YUV
processing
An installation note mentioning firmware compatibility will b e added to
all above mentioned spare kits
1. Only the Pro versions fitted with the new SBC’s or upgraded with the new SBC!
InfoT:
InfoT709
Page 2 of 2
  • Page 1 1
  • Page 2 2

Barco iCon H600 Owner's manual

iCon H600
Barco
Brand
Barco
Model
iCon H600
Type
Owner's manual

Barco iCon H600: Captivating Visual Experiences

The Barco iCon H600, a high-performance projector, offers stunning visuals for a range of applications. With its WUXGA resolution, 6,000 ANSI lumens brightness, and 2000:1 contrast ratio, it delivers sharp, detailed images even in well-lit environments.

Equipped with a variety of inputs, including DVI, HDMI, and VGA, the iCon H600 seamlessly connects to various sources, making it suitable for presentations, conferences, and digital signage. It also features lens shift capabilities, allowing for flexible placement and easy image alignment.

The iCon H600's advanced features enhance its versatility. Its keystone correction ensures distortion-free images, while the built-in edge blending功能enables seamless multi-projector setups for panoramic displays.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers