2. NXP
  3. DEMO9RS08KB12

NXP DEMO9RS08KB12 Reference guide

  • Hello! I am an AI chatbot trained to assist you with the NXP DEMO9RS08KB12 Reference guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quick Start Guide for DEMO9RS08KB12
DEMO9RS08KB12
A cost-effective solution for
entry-level applications
Get to Know the DEMO9RS08KB12 Board
External power
input
LED POT Keyboard
Light sensor
Extended port
KB12 silicon
RS232
connector
Power
selector
Built-in P&E
BDM circuitry
USB connector
Quick Start Guide for DEMO9RS08KB12
Introduction
The 8-bit DEMO9RS08KB12 soldered
with 20SOIC KB12 is a low-cost
kit targeting quick MC9RS08KB12
evaluation and demonstration. This
quick start guide is designed to help
you jumpstart the development of your
next cost-effective application using
the MC9RS08KB12.
Install Software
and Tools
CodeWarrior Development Studio for
Microcontrollers is a one-time required
step before connecting the board to your
computer.
• InserttheDVDintoyourcomputer
• Doubleclickon“Install
CodeWarrior Development Studio for
Microcontrollers v6.3” option
• Followtheon-screeninstructions
until installation is completed
Once the installation is completed, you can
takeadvantageofseveralCodeWarrior
tutorialsthatwillwalkyouthroughvarious
developmenttoolfeatures,suchas“C
Programming,”“AssemblyProgramming,”
“UsingProcessorExpert”andmore.
Simply open CodeWarrior using the path
“Programs>FreescaleCodeWarrior>CW
forMicrocontrollerV6.x>CodeWarrior
IDE.exe.”Click“RunGettingStarted
Tutorial” from the startup dialog, select
atutorialandfollowtheon-screen
instructions.
Connect Board to
Computer
USBdriverinstallationisaone-time
required step to be completed after
CodeWarrior installation.
• RemoveDEMO9RS08KB12demo
board from anti-static bags.
• ConnecttheAtoBgrayUSBcable
fromafreeUSBportinyourcomputer
totheUSBconnectorintheboard.
• Theoperatingsystemwillrecognize
yourboardasnewhardwareandwill
promptyoutoinstalltheUSBdrivers.
Choose the recommended option to
installthesoftwareautomatically.USB
driversforyourboardwerepre-loaded
in the CodeWarrior installation.
• Followon-screeninstructionsuntilall
USBdriversinstallationarecompleted.
EnsureD300andVDDLEDsareboth
ON.
You’venowcompletedtheinitialsetup.
STEP
1
STEP
2
Step-by-Step Installation Instructions
Quick Start Guide for DEMO9RS08KB12
STEP
3
STEP
4
Run the Preloaded
Demo Code
TheDEMO9RS08KB12comeswitha
demonstration program preloaded in its
on-chip flash memory. The demonstration
program converts analog reading from
thePOTRV1andLightSensorRZ1
tocontroltheLED1andLED2display.
TheLED1andLED2displayformatis
LED2:LED1.Thestatus“ON”means
binary1and“OFF”means0.Rotate
thepotfullyinbothdirections.LED1
andLED2combinetodisplaythepot
position.PressSW1toenableand
disablethelightsensorRZ1.LED1and
LED2combinetodisplaytheambient
light incident on the sensor.
Load and Debug Demo
Code on Board
Followinstructionsthatshowsteps
to load and debug the demo code.
The same demo code preloaded in
DEMO9RS08KB12boardisusedasan
examplehere:
• Copy“DEMO9RS08KB12Demo
Code”fromtheprovidedDVDand
save it in your PC folder. This demo
is the application preloaded in the
on-chip flash memory.
• StartCodeWarriorfromtheWindows
Start menu.
• FromtheCodeWarriormainmenu,
choose“File>Open”andselectthe
“DEMO9RS08KB12\KB12_Demo.mcp”
filefromthefolderwhereyousaved
theDEMO9RS08KB12Democode.
Click“Open”.TheProjectwindow
willopen.
• TheCcodeofthisexampleis
containedinthe“main.c”file.Double-
clickonthefiletoopenit.
• Fromthemainmenu,choose“Project
>Debug.”Thiswillcompilethesource
code,generateanexecutablefileand
downloadittothedemoboard.When
the“Warning”dialogappears,click
“OK”toproceed.Fromthemainmenu,
choose“Project>Debug.”Thiswill
compile the source code, generate
anexecutablefileanddownloaditto
thedemoboard.Whenthe“Warning”
dialogappears,click“OK”toproceed.
• Pleasedonotchangethedefault
settingof“P&EMultilink/CyclonePro.”
• Anewdebuggerenvironmentwill
open.Fromthemainmenu,choose
“Run>Start/Continue.”Theprogram
willbeexecutedinrealtime.
• Fromthemainmenu,choose“Run>
Halt.”Theprogramexecutionwillstop.
Thenextinstructiontobeexecutedis
highlightedintheSourcewindow.
Fromthemainmenu,choose“Run>
Single Step.” The instruction highlighted
intheSourcewindowwillbeexecuted,
andtheprogramexecutionwillbe
stopped immediately after.
Start Your Development
You have successfully completed this
tutorial.Youcancontinueexploring
allcreativepossibilitiesyouhavewith
CodeWarrior user interface for your
applications.Foranin-depthguideof
all CodeWarrior Development Studio
features,select“Help>CodeWarrior
Help” in the main menu.
Quick Start Guide for DEMO9RS08KB12
Freescale,theFreescalelogoandCodeWarriorareregisteredtrademarks
ofFreescaleSemiconductor,Inc.intheU.S.andothercountries.
ProcessorExpertisatrademarkofFreescaleSemiconductor.Allother
productorservicenamesarethepropertyoftheirrespectiveowners.
©FreescaleSemiconductor,Inc.2009.
DocNumber:DEMO9RS08KB12QSG/REV0
AgileNumber:926-26181/REVA
TolearnmoreabouttheDEMO9RS08KB12andtheRS08KBfamily,
please visit www.freescale.com/RS08KB.
/