SAGEMCOM F@st Pack Multi (501-503P) / Pack F@st Plug 500 Multi EU Owner's manual

SAGEMCOM
Brand
SAGEMCOM
Model
F@st Pack Multi (501-503P) / Pack F@st Plug 500 Multi EU
Category
PowerLine network adapters
Type
Owner's manual

This manual is also suitable for

F@ST PACK MULTI -
Quick Installation Guide
For more information about the way to secure your network or to join a HomePlug AV network, please consult the User Guide
available on the http://support.sagemcom.com website.
1
Plug both devices
into the mains
2
Connect your
equipments
Recommended use of a multiple plug adapter for F@sT PLUG 501
to your
equipments
501
503P
@
GIR Fast Pack-Multi 501-503P_EU-UK recto.ai 1 26/10/2012 10:10:34
Sagemcom Broadband SAS
Headquarters: 250, route de l’Empereur
92848 Rueil-Malmaison Cedex - FRANCE
Tel: +33 (0)1 57 61 10 00 - Fax: +33 (0)1 57 61 10 01
www.sagemcom.com
253523987-A - 26/10/12
All rights reserved. The information and specifications included are subject to change without prior notice. Sagemcom Broadband SAS tries to ensure that
all information in this document is correct, but does not accept liability for error or omission. Non contractual document. All trademarks are registered by
their respective owners. Simplified joint stock company - Capital 35 703 000 Euros - 518 250 360 RCS Nanterre.
Recommended use of a multiple plug adapter for F@sT PLUG 503P
Ethernet port
Use the Ethernet port to connect your
equipments using the Ethernet cable provided.
Important :
- Your devices have been already paired during manufacturing and will associate automatically once they are
plugged into the mains : no setup is required.
- The security button cannot be used when the device is in idle mode.
For more information on how to increase security on your network or add additional devices to an existing
powerline network, please consult the User Guide available on the http://support.sagemcom.com website.
Security button
Press this button between,
- 0-3 sec to join a powerline network
- 7-10 sec to leave the current powerline
network or start a new network
- 12-15 sec to return a device to its original
factory default configuration
Ethernet port is not connected.
Ethernet port is connected.
No powerline device detected on your network.
At least one powerline device is detected
on your network.
Device is OFF.
Device is ON.
Device is in «idle mode» when LED flashes
every 15 sec.
GIR Fast Pack-Multi 501-503P_EU-UK verso.ai 1 26/10/2012 14:30:44
  • Page 1 1
  • Page 2 2

SAGEMCOM F@st Pack Multi (501-503P) / Pack F@st Plug 500 Multi EU Owner's manual

SAGEMCOM
Brand
SAGEMCOM
Model
F@st Pack Multi (501-503P) / Pack F@st Plug 500 Multi EU
Category
PowerLine network adapters
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents