SAGEMCOM F@st Plug 501 Duo User guide

Category
PowerLine network adapters
Type
User guide

SAGEMCOM F@st Plug 501 Duo is a powerline adapter that allows you to connect your devices to the internet using your home's electrical wiring. It features a security button to protect your network and an Ethernet port to connect your devices with a cable. It's easy to set up and use, with no configuration required as the devices are pre-paired. Simply plug them into the mains, and they will automatically associate.

SAGEMCOM F@st Plug 501 Duo is a powerline adapter that allows you to connect your devices to the internet using your home's electrical wiring. It features a security button to protect your network and an Ethernet port to connect your devices with a cable. It's easy to set up and use, with no configuration required as the devices are pre-paired. Simply plug them into the mains, and they will automatically associate.

F@ST PLUG 501 DUO -
Quick Installation Guide
For more information about the way to secure your network or to join a HomePlug AV network, please consult the User Guide
available on the http://support.sagemcom.com website.
1
Plug both devices
into the mains
2
Recommended use of a multiple plug adapter
Connect your
equipments
to your
equipments
@
GIR Fast Plug 501_EU-UK recto.ai 1 26/10/2012 10:30:30
Sagemcom Broadband SAS
Headquarters: 250, route de l’Empereur
92848 Rueil-Malmaison Cedex - FRANCE
Tel: +33 (0)1 57 61 10 00 - Fax: +33 (0)1 57 61 10 01
www.sagemcom.com
253524004-A - 26/10/12
All rights reserved. The information and specications included are subject to change without prior notice. Sagemcom Broadband SAS tries to ensure that
all information in this document is correct, but does not accept liability for error or omission. Non contractual document. All trademarks are registered by
their respective owners. Simplied joint stock company - Capital 35 703 000 Euros - 518 250 360 RCS Nanterre.
Device is OFF.
Device is in «idle mode» when LED flashes every 15 sec.
Device is ON.
Ethernet port is not connected.
Ethernet port is connected.
No powerline device detected on your network.
At least one powerline device is detected on your network.
Ethernet port
Use the Ethernet port to connect your equipments
using the Ethernet cable provided.
Important :
- Your devices have been already paired during manufacturing and will associate automatically once they are
plugged into the mains : no setup is required.
- The security button cannot be used when the device is in idle mode.
For more information on how to increase security on your network or add additional devices to an existing
powerline network, please consult the User Guide available on the http://support.sagemcom.com website.
Security button
Press this button between,
- 0-3 sec to join a powerline network
- 7-10 sec to leave the current powerline network or
start a new network
- 12-15 sec to return a device to its original factory
default configuration
GIR Fast Plug 501_EU-UK verso.ai 1 26/10/2012 15:15:03
  • Page 1 1
  • Page 2 2

SAGEMCOM F@st Plug 501 Duo User guide

Category
PowerLine network adapters
Type
User guide

SAGEMCOM F@st Plug 501 Duo is a powerline adapter that allows you to connect your devices to the internet using your home's electrical wiring. It features a security button to protect your network and an Ethernet port to connect your devices with a cable. It's easy to set up and use, with no configuration required as the devices are pre-paired. Simply plug them into the mains, and they will automatically associate.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI