OrderofInstallation
TouseACP5,itshallbeinstalledinthefollowingorder.
STEP1.CheckpointsduringtheACP5installation
BeforeinstallingtheACP5,checkthecautions.
STEP2.Studythecableconnectionsdiagramoftheentiresystem.
StudythecableconnectiondiagramofthesitewheretheACP5isinstalled.
STEP3.Setthealldeviceunitaddress
SettheaddressoftheACP5nottobeoverlappedwiththeconnectingdeviceunit.
STEP4.SetPI485andconnectcables
SetDIPswitchofPI485correctly,andconnectRS-485communicationcable.
STEP5.ACP5InstallationandCableConnection
InstallACP5andconnectnetworkandothercables.
STEP6.ACP5NetworkAddressSetting
SetthenetworkaddresstobeabletoaccesstheACP5throughinternet.
STEP7.SetwebGUIaccessenvironment
SettheaccessenvironmentinwebGUI,whichistheoperationprogramoftheACP5.
STEP8.Inputalldeviceinformation
InputandsavedeviceinformationinWebGUI,whichisACP5operatingprogram.
STEP9.CheckWebGUIControl/Monitoring
AccesstoWebGUI,whichisACP5operatingprogram,andcheckifcontrol/monitoringareproperlycarriedout.
Caution
ACP5Installation
TheACP5installationworkneedstheprofessionaltechnique.Therefore,theinstallationdescribedinthischaptershouldbeperformedbythecertified
installationprofessional.
Forquestionsandrequestswithregardtotheinstallation,pleasecontacttheservicecenterorinstallationspecialtystoreapprovedbyLG.
UserManual
