BevLes, Inc. PHC70-MP17-A Proofer / Hot Cabinets Datasheet

Brand: BevLes, Inc.

Model: PHC70-MP17-A Proofer / Hot Cabinets

Type: Datasheet

S t a n d a r d S e r i e s - N o n - I n s u l a t e d

Proofer / Hot Cabinets

U n i v e r s a l W i d t h

Innovative Foodservice Equipment Custom Designed For Performance, Service and

Standard Features:

• Choice of aluminum or stainless steel construction

• Extruded pan supports accept a variety of pans and

screens

• Full-length Lexan

door with heavy-duty hinges,

positive closing latch and perimeter gasket

• Removable heating module with separate controls

for heat and humidity

• Maintains uniform temperature throughout cabinet

• Proof or hold with adjustable temperature from

80°F (27°C) to 180°F (82°C)

• "Cast-in" humidity system prevents element burnout

from water spills and potential injury from accidental

contact with exposed heating elements

• Self-draining feature collects excess moisture into a

standard bun pan (not included) below the base of

the cabinet

• Completely removable interior components for quick

and easy cleaning

• Heavy-duty plate-type casters with 5" hard neoprene

wheels, front two with brakes

• 120V, 20A, 1PH, service

NON-INSULATED

UNIVERSAL WIDTH MODEL

PHC70-MP17-A

Model PHC70-MP17-A

Combination Cabinet for Low

Temperature Proofing or

High Temperature Holding

®®

120V 20A MODELS

BEVLES COMPANY, INC. Mailing: 729 Third Ave., Dallas, TX 75389-0209 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007

Toll Free: (800) 527-2100 • Local: (214) 421-7366 • Fax: (214) 565-0976 • www.bevles.com • [email protected]

Item No.

Approval:

Date:

S t a n d a r d S e r i e s - N o n - I n s u l a t e d

Proofer / Hot Cabinets

U n i v e r s a l W i d t h

BEVLES COMPANY, INC. (800) 527-2100 • Fax: (214) 565-0976

Printed in U.S.A. • 1/04 • Bevles\specsheets\PHC70-MP17.pdf

CABINET (Aluminum or Stainless Steel):

• Body: .063 aluminum or 22 ga. 304 #4 stainless steel

• Door: Clear Lexan

with an extruded aluminum frame

• Door Latch and Hinges: Patented positive action door latch

with heavy-duty stainless steel hinges

• Door Gasket: Closed cell foam

• Base: .125 aluminum or 14 ga. 304-2B stainless steel

• Rear (Air Duct) Panel: .063 aluminum or 22 ga. 304-2B

stainless steel

PAN SUPPORT ASSEMBLY:

• Pan Supports: Extruded pan supports adjustable on 1 1/2"

centers

• Uprights: .100 aluminum or 16 ga. 304-2B stainless steel

slotted on 1 1/2" centers

HEATING MODULE & CONTROLS:

• Bottom mounted heating unit with a one (1) piece modular

drop-in design blower assembly, easily removable for

maintenance and cleaning

• Air heating element at 1600 watts, 120 volts

• Humidity heating element rated at 400 watts, 120 volts

• 5 quart (4.7 liter) cast water reservoir

• Lexan

water reservoir cover

• Easy to operate controls feature precision thermostat,

variable humidity control and dial thermometer

• All controls are visible and operable from exterior of cabinet

Specifications subject to change without notice.

ELECTRICAL:

• Switch: Heavy-duty, 20 Amp, with water shed seal

• Cord and Plug: 8' cord with 20A molded plug (NEMA 5-20P);

208/240 volt models provided with cord only

CASTERS:

• Heavy-duty plate type casters, with 5" hard neoprene wheels;

all swivel, with wheel brakes on front two casters

OPTIONS AND ACCESSORIES

o Door hinging

o Lexan

, dutch doors

o Solid, full, or dutch doors

o Corner bumpers of gray non-marking vinyl (set of 4)

o Perimeter bumper of gray non-marking vinyl

o Automatic water supply system eliminates need to manually

fill water reservoir after simple hook-up to cold water line

o Additional extruded universal pan supports

o 6" stainless steel legs with adjustable feet for stationary floor

installation *

o Choice of 4" or 5" casters with hard neoprene or

polyurethane wheels *

o 18" x 26" chrome electroplated wire racks

o Cord Guide/Protector: Unique cord guide provides safe and

easy routing to rear of cabinet

o Aluminum or stainless steel drop handles

o Drip Trough

BEVLES

MODEL NO.

CAPACITY

18X26

12X20

*SPC'G CMIN CMIN CMIN CMIN

DIM A (H) DIM B (W) DIM C (D)

INSIDE HGT

SHIP WT

kgslbs kgslbs

ACT WT

71.5

33 1/2

PHC70-MP17-A

93.0 180

181.6

73.7 85.1

132.1

**34

205 81.6

WATTS

VOLTAGEELECTRICAL

AMPS ELECTRIC SERVICE CLEARANCESPHASE HERTZ

120 2000

16.0 20A Dedicated Circuit

STANDARD

50/60

Zero Clearance Cabinet

208/240 2000

8.0 15A Dedicated Circuit

OPTIONAL

50/60

Zero Clearance Cabinet

* Adjustable on 1 1/2" centers ** Also accommodates 19" x 19" and 23" x 23" screens -A = Aluminum -S = Stainless steel

FRONT VIEW SIDE VIEWREAR VIEW

57.750 in

146.7 cm

TOP VIEW

BevLes, Inc. PHC70-MP17-A Proofer / Hot Cabinets Datasheet

BevLes, Inc. PHC70-MP17-A Proofer / Hot Cabinets Datasheet

BevLes, Inc. PHC70-MP17-A Proofer / Hot Cabinets Datasheet

Related papers

Other documents