RGBlink C1US User manual

Brand: RGBlink

Model: C1US

Category: TVs & monitors

Type: User manual

C1US

USER MANUAL

Article No：

RGB-RD-UM-C1US E001

Revision No:V1.1

C1US User Manual

CONTENT

Declarations................................................................................4

FCC/Warranty..................................................................... 4

Operators Safety Summary................................................. 6

Installation Safety Summary...........................................8

Chapter 1 Your Product.............................................................. 9

1.1 In the Box.................................................................... 9

1.2 Product Overview.................................................... 10

1.2.1 Rear Panel.....................................................11

1.2.2 Front Panel....................................................13

1.2.3 Dimension......................................................14

Chapter 2 Installing Your Product........................................15

2.1 Plugging in Signals..................................................15

2.2 Plugging in Main Power..........................................15

2.3 Turning on Your Product.........................................15

Chapter 3 Using Your Product............................................. 16

3.1 Using the MENU Button............................................ 16

3.2 Understanding the MENU Structure.......................... 17

3.3 Using the Menu........................................................18

3.3.1 Default Menu.................................................18

3.3.2 Main Menu.....................................................20

3.3.3 INPUT.............................................................21

3.3.4 OUTPUT........................................................ 23

3.3.5 TRANSITION................................................ 26

3.3.6 SPLIT..............................................................27

3.3.7 SYSTEM........................................................ 28

3.3.8 FACTORY RESET....................................... 30

3.4 Output Resolution Setting...................................... 31

C1US User Manual

3.4.1 Select Output Resolution............................ 31

3.4.2 Customize Output Resolution.................... 32

3.5 Scale.......................................................................... 35

3.6 Input Sizing Adjust................................................... 36

3.7 Single Picture Switching.........................................38

3.8 【PIP】Picture In Picture...................................... 39

3.9 SPLIT Setting........................................................... 41

3.10 TEXT OVERLAY Setting...................................... 43

3.11 Screen Size Setting...............................................46

3.12 【TAKE】Button.................................................... 48

3.13 TRANISITION........................................................ 49

3.14 AUDIO Setting..........................................................51

3.15 BLACK OUT Setting................................................52

3.16 FREEZE.................................................................... 54

3.17 【BRI】Image Adjustment..................................... 55

3.18 【SAVE】Save Settings......................................56

3.19【LOAD】Recall Saved Settings.......................... 57

CHAPTER 4 ORDERING CODES.................................................. 58

4.1 PRODUCT................................................................ 58

4.2 OPTIONS...................................................................58

4.2.1 Input Options

................................................ 58

CHAPTER 5 Support .............................................................. 59

5.1 Contact Us...................................................................59

CHAPTER 6 APPENDIX.......................................................60

6.1 Specification................................................................60

6.2 Upgrade Device...........................................................69

6.3 Terms & Definitions

.....................................................70

6.4 Revison History

............................................................80

C1US User Manual

Thank you for choosing our product!

This User Manual is designed to show you how to use this

video processor quickly and make use of all the features.

Please read all directions and instructions carefully before

using this product.

Declarations

FCC/Warranty

Federal Communications Commission

(FCC) Statement

This equipment has been tested and found to comply with the

limits for a class A digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area may cause harmful interference, in which case the user

will be responsible for correcting any interference.

Guarantee and Compensation

C1US User Manual

RGBlink provides a guarantee relating to perfect

manufacturing as part of the legally stipulated terms of

guarantee. On receipt, the purchaser must immediately

inspect all delivered goods for damage incurred during

transport, as well as for material and manufacturing faults.

RGBlink must be informed immediately in writing of any

complains.

The period of guarantee begins on the date of transfer of risks,

in the case of special systems and software on the date of

commissioning, at latest 30 days after the transfer of risks. In

the event of justified notice of compliant, RGBlink can repair

the fault or provide a replacement at its own discretion within

an appropriate period. If this measure proves to be impossible

or unsuccessful, the purchaser can demand a reduction in the

purchase price or cancellation of the contract. All other claims,

in particular those relating to compensation for direct or

indirect damage, and also damage attributed to the operation

of software as well as to other service provided by RGBlink,

being a component of the system or independent service, will

be deemed invalid provided the damage is not proven to be

attributed to the absence of properties guaranteed in writing

or due to the intent or gross negligence or part of RGBlink.

If the purchaser or a third party carries out modifications or

repairs on goods delivered by RGBlink, or if the goods are

handled incorrectly, in particular if the systems are

commissioned operated incorrectly or if, after the transfer of

risks, the goods are subject to influences not agreed upon in

the contract, all guarantee claims of the purchaser will be

C1US User Manual

rendered invalid. Not included in the guarantee coverage are

system failures which are attributed to programs or special

electronic circuitry provided by the purchaser, e.g. interfaces.

Normal wear as well as normal maintenance are not subject to

the guarantee provided by RGBlink either.

The environmental conditions as well as the servicing and

maintenance regulations specified in this manual must be

complied with by the customer.

Operators Safety Summary

The general safety information in this summary is for operating

personnel.

Do Not Remove Covers or Panels

There are no user-serviceable parts within the unit. Removal of

the top cover will expose dangerous voltages. To avoid

personal injury, do not remove the top cover. Do not operate

the unit without the cover installed.

Power Source

This product is intended to operate from a power

source that will not apply more than 230 volts rms

between the supply conductors or between both

supply conductor and ground. A protective ground

connection by way of grounding conductor in the

power cord is essential for safe operation.

C1US User Manual

Grounding the Product

This product is grounded through the grounding conductor

of the power cord. To avoid electrical shock, plug the

power cord into a properly wired receptacle before

connecting to the product input or output terminals. A

protective-ground connection by way of the grounding

conductor in the power cord is essential for safe

operation.

Use the Proper Power Cord

Use only the power cord and connector specified for your

product. Use only a power cord that is in good condition. Refer

cord and connector changes to qualified service personnel.

Use the Proper Fuse

To avoid fire hazard, use only the fuse having identical type,

voltage rating, and current rating characteristics. Refer fuse

replacement to qualified service personnel.

Do Not Operate in Explosive

Atmospheres

To avoid explosion, do not operate this product in an explosive

atmosphere.

C1US User Manual

Installation Safety Summary

Safety Precautions

For all C1US processor installation procedures, please observe

the following important safety and handling rules to avoid

damage to yourself and the equipment.

To protect users from electric shock, ensure that the chassis

connects to earth via the ground wire provided in the AC

power Cord. The AC Socket-outlet should be installed near the

equipment and be easily accessible.

Unpacking and Inspection

Before opening C1US processor shipping box, inspect it for

damage. If you find any damage, notify the shipping carrier

immediately for all claims adjustments. As you open the box,

compare its contents against the packing slip. If you find any

shortages, contact your sales representative.

Once you have removed all the components from their

packaging and checked that all the listed components are

present, visually inspect the system to ensure there was no

damage during shipping. If there is damage, notify the shipping

carrier immediately for all claims adjustments.

Site Preparation

The environment in which you install your VENUS X1 should be

clean, properly lit, free from static, and have adequate power,

ventilation, and space for all components.

C1US User Manual

Chapter 1 Your Product

1.1 In the Box

Note:

AC Power Cable supplied as standard according to destination

market.

AC Power Cord

DVI to HDMI

Cord

USB Cable

C1US User Manual

1.2 Product Overview

C1US

is a multiple outputs video process that accepts a wide

variety of video signals, including DVI, VGA, HDMI, CVBS

and

SDI. It also supports an optional input to meet users’ actual

need.

Its front panel is easy and convenient to operate and rear panel

is equipped with two sending card slots for flexible sending

card installation.

C1US support multiple cascade, analog audio input and output,

EDID edit on input port and read on output port. Users can do

EDID editing on input port according to the output resolution

to optimize the input resolution. USB input module can be

selected as option different from USB control, U-disk is used as

input source. C1US with USB input module can be used as

signal generator to further meet user’s application needs.

C1US SYSTEM CONNECTION DIAGRAM

C1US User Manual

1.2.1 Rear Panel

INPUT CONNECTORS

SDI in and SDI loop

Optional input module area

VGA/YP Input DB15 port

Audio input

CVBS input BNC port

HDMI and HDIMI loop

DVI input

C1US User Manual

OUTPUT CONNECTORS

DVI output DVI-I port

Audio output

CONTROL PORT

USB-A

RS232

OTHERS

Sending card slots

POWER

Power switch

Power IEC-3

C1US User Manual

1.2.2 Front Panel

FRONT PANEL

LCD

Show operation and

menu items

Menu and back button

Kno

Confirm and Select

button,functioned by

DUL

Optional Input module

selection area

OK button

CVB

Select CVBS input signal

SAV

Save current settings

as preset

VGA

Select VGA and YPbPr

input signal

FREE

Freeze current screen

Select HDMI input signal

SACL

Scale

DVI

Select DVI input signal

PIP

Picture in picture

SDI

Select SDI input signal

Full screen

TAK

Switch mode

BRI

Image adjustment

0~9

Numeral button , for

scaling and self-defined

LOA

Load the saved

setting

C1US User Manual

1.2.3 Dimension

Following is the dimension of C1US for your reference:：

C1US User Manual

INPUT: HDMI

NO INPUT

OUTPUT:1920x1080@60

VER:1.38

Chapter 2 Installing Your

Product

2.1 Plugging in Signals

Connect signals to the product (ensure all devices are powered

off first). Tighten connector screws/locks where provided.

2.2 Plugging in Main Power

Connect IEC cable to device and plug into wall socket. Turn on

power at wall socket.

2.3 Turning on Your Product

Turn the power switch on the rear to ON position.

TST screen shows as below

，

meanwhile the device enter

initializing state after that，the device will load the previously

saved setting. On delivery, the default input is HDMI at

resolution 1920x1080@60.

C1US User Manual

Chapter 3 Using Your

Product

3.1 Using the MENU Button

Push

【

】

button to enter main menu.

Turn the knob to select corresponding menu item.

The symbol >indicate that the item is selected.

Push the knob or【OK】button to confirm the operation.

The symbol

＊

means the selected item is under editing state,

ready to be set or checked

The operation diagram is as follows

：

C1US User Manual

3.2 Understanding the MENU

Structure

The MENU structure is shown in the figure below:

C1US User Manual

INPUT: HDMI

NO INPUT

OUTPUT：1920x1080@60

VER：1.38

3.3 Using the Menu

Use the menu system for convenient and intuitive operation.

C1US TST display shows the menu items. The TST display will

show the default state when the menu is not in use, or the

operation has timed out. Using the

【

】

button and

rotary knob in the front panel, the TST display will show the

corresponding menus according to user selections.

3.3.1 Default Menu

Turn

the power switch on the rear to ON position

After the device initializing the TST screen shows below:

C1US User Manual

Here are details of Default Menu：

INPUT

Show the format and resolution of currently selected

input source.

OUTPUT

Show current output resolution. Users can select

VER

Show current software of the device

ICON

Show the current setting of the device, such as freeze,

picture in picture,splitting

C1US User Manual

3.3.2 Main Menu

Push the

【

】

button in the default state and turn the

rotary knob, the TST display will show the main menus as

below：

There are 6 menu items in the main menu, and display in 2

pages. Turn the rotary knob, and select any menu above, push

the rotary knob or

【

】

button to confirm, the TST display

will show the sub-menu. If push the

【

】

button, it will

return to the last level menu.

>INPUT >>

OUTPUT >>

TRANSITION >>

SPLIT >>

SYSTEM >>

>FACTORY RESET >>

Page is loading ...

RGBlink C1US User manual

Brand: RGBlink

Model: C1US

Category: TVs & monitors

Type: User manual

Download PDF

report

RGBlink C1US User manual

RGBlink C1US User manual

Related papers

Other documents