Owner’s Manual Room Air Conditioner with R-410A Heat Controller
Wash the filter using liquid dishwashing detergent
and warm water. Rinse filter thoroughly. Gently shake
excess water from the filter. Be sure the filter is
thoroughly dry before replacing. Or, instead of washing
you may vacuum the filter clean.
Before calling for service, review this list. It may save you time and expense. This list includes
common occurences that are not the result of defective workmanship or materials in this appliance.
Compressor stopped when changing modes. Wait 3 minutes after setting
to the cool mode.
Temperature sensor behind air filter ele
ment touching cold coil. The sensor should
not be in contact with the cold coil.
14