Chevrolet UPLANDER 2007 Navigation Guide

Overview

........................................................ 5

Overview

.................................................. 6

Features and Controls

................................ 17

Features and Controls

............................ 18

Navigation Audio System

............................ 61

Navigation Audio System

........................ 62

Index

............................................................ 75

2007 Buick Terraza, Chevrolet Uplander, Pontiac

Montana SV6, and Saturn RELAY Navigation System

M

1

GENERAL MOTORS, GM, the GM Emblem,

BUICK, and the BUICK Emblem, CHEVROLET,

the CHEVROLET Emblem, PONTIAC, the

PONTIAC Emblem, and the name UPLANDER

and MONTANA are registered trademarks; and the

name TERRAZA and SV6 are trademarks of

General Motors Corporation.

SATURN, the SATURN Emblem, and the name

RELAY are registered trademarks of Saturn

Corporation.

Litho in U.S.A.

Part No. 15911188 A First Printing

©

2

The information in this manual supplements the

owner manual. This manual includes the latest

information available at the time it was printed. We

reserve the right to make changes in the product

after that time without notice. For vehicles ﬁrst sold

in Canada, substitute the name General Motors

of Canada Limited for Buick Motor Division,

Chevrolet Motor Division, or Pontiac Division

whenever it appears in this manual.

Keep this manual with the owner manual in the

vehicle, so it will be there if it is needed. If

the vehicle is sold, leave this manual in the

vehicle.

Canadian Owners

For Canadian owners that would like to obtain a

French language manual, see “Canadian Owners”

in the Index of your vehicle’s owner manual.

3

✍ NOTES

4

Overview ......................................................... 6

Navigation System Overview ......................... 6

Getting Started .............................................. 8

Cleaning the Video Screen .......................... 16

Section 1 Overview

5

Overview

Navigation System Overview

6

A. X (Tilt Open/CD Eject) Key. See “Hard Keys”

under Using the Navigation System on

page 18.

B. Directional Indicator. See Symbols on page 24.

C.

X (DVD Eject) Key. See “Hard Keys” under

Using the Navigation System on page 18.

D. CD Loading Slot. See CD Player on page 70.

E. DVD Loading Slot. See “Loading a DVD

Map Disc” under Getting Started on page 8.

F.

P (Power/Volume) Knob. See “Hard

Keys” under Using the Navigation System on

page 18.

G. NAV (Navigation) Key. See “Hard Keys” under

Using the Navigation System on page 18.

H. NAV RPT (Navigation Repeat) Key. See “Hard

Keys” under Using the Navigation System

on page 18.

I. BAND Key. See “Playing the Radio” under

Navigation Audio System on page 62.

J.

w SEEK x Key. See “Finding a Station”

under Navigation Audio System on page 62.

K.

B (CD) Key. See CD Player on page 70.

L.

e (Audio) Key. See Navigation Audio System

on page 62.

M. CONFIG (Conﬁgure) Key. See “Hard Keys”

under Using the Navigation System on page 18.

N.

O (Tuning) Knob. See “Finding a Station”

under Navigation Audio System on page 62.

O.

V (Zoom In) Screen Button. See “Touch

Sensitive Screen Buttons” under Using

the Navigation System on page 18.

P. Dest (Destination) Screen Button. See “Touch

Sensitive Screen Buttons” under Using the

Navigation System on page 18.

Q. Nav (Navigation) Options Screen Button. See

“Touch Sensitive Screen Buttons” under

Using the Navigation System on page 18.

R. Nav

y (Navigation Menu) Screen Button. See

“Touch Sensitive Screen Buttons” under

Using the Navigation System on page 18.

S.

U (Zoom Out) Screen Button. See “Touch

Sensitive Screen Buttons” under Using

the Navigation System on page 18.

T. Clock. See “Clock” under Conﬁgure Menu on

page 52.

7

Getting Started

Before you begin to operate the navigation system,

read this manual thoroughly to become familiar with

it and to understand how the system works.

Keeping your mind on the drive is important for

safe driving. See “Defensive Driving” in the Index

of your vehicle’s owner manual for more

information. Get familiar with your vehicle’s

navigation system so you can use it with less

effort and take full advantage of its features. Your

navigation system includes not only navigation,

but also audio functions. While your vehicle

is parked:

• Familiarize yourself with all of its controls:

hard keys on the faceplate and touch-sensitive

screen buttons.

• Familiarize yourself with its operation.

• Set up your audio by presetting your favorite

stations, setting the tone, and adjusting the

speakers. Then, when driving conditions

permit, you can tune to your favorite stations

using the presets and steering wheel controls

(if equipped).

• Set up the navigation features that can only be

done before you begin driving, such as entering

an address or a preset destination.

Entering a destination or alphanumeric text

requires many steps, so you can only perform

these operations when the vehicle is in PARK (P).

You will notice that touch-sensitive screen

buttons leading to the alphanumeric keyboard are

dimmed out while driving.

Other functions may also be locked out while

driving and they too will appear grayed out on the

screen — but all functions are available when

parked. Some functions can be performed while

driving, as long as you can do so without diverting

too much of your attention from your driving.

8

{CAUTION:

This system provides you with a far greater

access to audio stations and song listings.

Giving extended attention to entertainment

tasks while driving can cause a crash and

you or others can be injured or killed.

Always keep your eyes on the road and

your mind on the drive — avoid engaging

in extended searching while driving.

{CAUTION:

Looking at the moving map on the

navigation screen frequently or for too

long while driving can cause a crash and

you or others can be injured or killed.

Keep your eyes and mind on the road and

avoid looking too long or too often at the

moving map on the navigation screen.

Use the voice guidance directions

whenever possible.

The navigation system allows you to do the

following:

• Plan a route with provided turn-by-turn route

and map guidance with voice prompts.

• Select a destination using various methods and

choices.

9

The information in the system may not always be

complete. Road conditions such as prohibited turns,

detours, and construction zones, change

frequently. It is important to consider whether you

can follow the directions given by the system for the

current conditions.

Every ﬁfty times the vehicle is started and the

navigation system is turned on, the CAUTION

screen will appear. Touch the Next screen button

for the map DVD information to load. You can

also select to change the language, Eng (English)

or Fr (French). See “Language” under Conﬁgure

Menu on page 52 for more information.

When getting started, you may set the navigation

system to your preference using various options.

You will also need to know how to perform various

functions to begin route guidance. Reference

the following topics for further information:

Setting Radio Station Presets

To set preset radio stations, do the following:

1. Press the power/volume knob to turn

the system on.

2. Press the BAND hard key to access the band

menu and select the desired band (AM, FM1,

FM2, XM1, or XM2 (if equipped).

3. Use the tuning knob or the SEEK hard key

arrows to select a station.

4. Touch and hold one of the six screen buttons

at the bottom of the screen until you hear a

beep or see the station displayed on the

selected preset button.

10

Setting the Time

To set the time, do the following:

1. Press the power/volume knob to turn the

system on.

2. Press the CONFIG hard key.

3. Touch the Clock screen button.

4. Scroll through the Time Zones until the

desired time zone is highlighted.

5. Touch the Daylight Savings screen button.

The time is now set. Touch the Manual Adjust

screen button if you need to further adjust the time.

The radio will use the GPS satellite to set the

time. The vehicle needs to be in an open area to

receive the signal. See Global Positioning

System (GPS) on page 56 for more information.

Loading a DVD Map Disc

To load a DVD map disc, do the following:

1. Press the power/volume knob to turn the

system on.

2. Press and hold the eject key to tilt the screen

forward.

3. Insert the DVD map disc into the DVD slot.

Notice: Pressing directly on the navigation

screen may cause damage. Repairs would not

be covered by your warranty. Do not press

directly on the navigation screen.

4. To close the screen, slightly push up on the two

outer top corners until the screen is in position,

then push the screen in, by pushing on the four

outer corners, until you hear a click.

5. A notice may appear. Touch the Next screen

button to proceed.

11

Entering an Address, Point of Interest,

Home, and Preset Destinations

Before entering an Address, Point of Interest,

Home, or Preset Destination, select the

appropriate search area that contains the ﬁnal

destination. Your vehicle must be in PARK (P) to

perform this operation.

Setting the Search Area

To set the search area, do the following:

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this

section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Dest screen button.

4. Touch the Change screen button.

5. Touch the appropriate Search Area numbered

screen button that contains your ﬁnal

destination.

The system will return to the Destination menu.

Entering an Address

You can set a destination by entering an address.

To enter an address, do the following:

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this

section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Dest screen button.

4. Verify that the selected Search Area is

correct.

5. Touch the Address screen button.

6. Enter the city name using the alpha keypad

on the screen.

7. Select the city name from the list by touching

the screen button next to the correct city name.

12

8. Enter the street name using the alpha keypad

on the screen.

Do not enter directional information or street

type, and use the space symbol screen button

(

U ) between street or city names. For

example, the street name N. Royal Oak

Rd. should be entered as royal

U oak.

Use the backspace (

V ) screen button if an

incorrect character has been entered.

9. Select the desired street name from the list by

touching the screen button next to the correct

street name.

10. Enter the address number using the numeric

keypad on the screen. You may ﬁrst have to

select the correct range for the address

number, then enter the desired address and

touch the OK screen button. The map

screen will display.

11. Touch the Set Destination screen button. The

address entry is now complete.

12. Touch the Route screen button.

13. Touch the Start screen button.

14. Once you begin driving you will hear an audio

prompt to “Proceed to the highlighted route.”

You are now in route guidance mode.

Entering a Point of Interest (POI)

To set a destination by entering a Point of Interest

(POI), do the following:

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this

section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Dest screen button.

13

4. Verify that the selected Search Area is

correct.

5. Touch the POI screen button.

6. Enter the speciﬁc title of the POI in the Name

space (i.e. Washington Monument) using the

alpha keypad on the screen.

• If there are POIs with the same name, spell

out the name and then touch the List

screen button (McDonald’s restaurant vs.

McDonald corporate office).

• Select the business desired.

• The system will list the POIs in alphabetical

order or, if there are multiple POIs with the

same name, the system will list the POIs

in order of distance from your location.

• Touch the screen button next to the address

of the POI desired.

7. Touch the Set Destination screen button. The

POI entry is now complete.

8. Touch the Route screen button.

9. Touch the Start screen button.

10. Once you begin driving you will hear an audio

prompt to “Proceed to the highlighted route.”

You are now in route guidance mode.

Using the Category or City selections will aid the

system in ﬁnding the POI by limiting the search

options.

Setting Home Destination

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this

section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Nav

y (navigation) menu screen

button.

14

4. Touch the Memory Points screen button.

5. Touch the Register Home screen button.

6. Touch the Address screen button and then

enter all address information.

7. Touch OK. The map screen will display.

8. Touch the Register Point screen button to

store the home address as a memory point.

The home symbol will now be available on the

Destination screen. See “Using Your Home

or Preset Destinations” later to use the home

destination as a planned route.

Setting Preset Destinations

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this

section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Nav

y (navigation) menu screen

button.

4. Touch the Memory Points screen button.

5. Touch the Register screen button under the

Preset Dest. column.

6. Touch one of the ﬁve preset buttons.

7. Touch the Address screen button and then

enter the address information.

8. Touch OK. The map screen will display.

9. Touch the Register Point screen button to

store the memory point.

The preset destination number will now be

available on the Destination screen. See

“Using Your Home or Preset Destinations” later

to use preset destinations as a planned

route.

15

Using Your Home or Preset

Destinations

These destinations are available for selection

while driving.

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this

section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Dest screen button.

4. Touch the

L (Home symbol) or one of the

available Preset Destination symbols at the

bottom of the Destination screen. The

map screen will display.

5. If currently driving on a route, touch the Set

Destination screen button. The system will

calculate the new route. If you are not

currently driving on a route, the system will

automatically calculate a route to the home or

preset destination selected.

6. Touch the Route screen button.

7. Touch the Start screen button.

8. Once you begin driving, or if you are already

driving, you will hear an audio prompt to

“Proceed to the highlighted route.” You are

now in route guidance mode.

Canceling Guidance

Guidance will be canceled once you arrive at your

ﬁnal destination. To cancel guidance prior to

arrival at the ﬁnal destination, do the following:

1. From the map screen, touch the Nav Options

screen button.

2. Touch the Cancel Route screen button.

3. Touch the Yes screen button to conﬁrm

cancellation.

Cleaning the Video Screen

When cleaning the video screen, use only a soft

clean cotton cloth dampened with clean water.

16

Features and Controls .................................. 18

Using the Navigation System ....................... 18

Maps ........................................................... 22

Symbols ...................................................... 24

Navigation Menu ......................................... 26

Destination .................................................. 37

Colors on the Screen .................................. 52

Conﬁgure Menu ........................................... 52

Global Positioning System (GPS) ................ 56

Vehicle Positioning ...................................... 57

Problems with Route Guidance ................... 58

If the System Needs Service ....................... 58

Ordering Map DVDs .................................... 58

Database Coverage Explanations ................ 59

Section 2 Features and Controls

17

Features and Controls

Using the Navigation System

This section includes the basic information to

operate the navigation system.

The main navigation menu displays a number of

options which offer information on a variety of

topics. See Navigation Menu on page 26 for more

information.

Use the hard keys located on the navigation

system along with the available touch-sensitive

screen buttons on the navigation screen to operate

the system.

Once the vehicle is moving, various functions will

be disabled to reduce driver distractions.

Hard Keys

The following hard keys are located to the left of

the navigation screen:

P / v (Power/Volume Knob): Press the

power/volume knob to turn the audio and

navigation system on and off. Turn the knob to

increase or decrease the volume to the audio

system.

NAV RPT (Navigation Repeat): Press the NAV

RPT key to repeat the current voice guidance

navigation prompt.

NAV (Navigation): If you are in a menu and are

not on the map screen, press the NAV key to

view the map showing your vehicle’s current

position.

If a route has not been planned, press this key to

display the map screen and the following

information:

• North or Heading Up symbol

• Time

• Map scale

18

If a route has been planned, press this key to

display the map screen and the following

information:

• Number of miles/kilometers between current

vehicle position and the destination. See

“Route Overview Menu” under Destination on

page 37 for more information.

• Estimated travel time to the destination. See

“Route Overview Menu” under Destination

on page 37 for more information.

• Highlighted route or turn-by-turn instructions.

See “Map Appearance” under Navigation

Menu on page 26 for more information.

You will ﬁnd more information on each feature

found on a map screen later in this manual.

BAND: Press the BAND key to access the BAND

screen and to switch between AM, FM1, FM2,

XM1, or XM2, if equipped. See “Finding a Station”

under Navigation Audio System on page 62.

x SEEK w: Press the SEEK up or down arrows

to go to the next or previous radio station or

tracks on a CD. See “Finding a Station” under

Navigation Audio System on page 62 or CD Player

on page 70.

B (CD): Press the CD key to play a CD. The

CD screen will display. See CD Player on page 70.

e (Audio): Press the audio key to access the

Audio menu. See Navigation Audio System

on page 62.

CONFIG (Conﬁgure): Press the CONFIG key to

access the Conﬁgure menu. See Conﬁgure

Menu on page 52 for more information.

O (Tuning) Knob: Turn the tuning knob to go

to the next or previous frequency. See “Finding

a Station” under Navigation Audio System

on page 62.

X (Tilt Open/CD Eject) Key: Press the eject

key located next to the CD slot to eject a CD.

Press and hold the eject key to tilt the screen

forward to access the map DVD slot. See “Loading

a DVD Map Disc” under Getting Started on page 8

for more information on loading the map DVD.

X (DVD Eject) Key: Once the screen is tilted

forward, press this eject button to eject the

map DVD.

19

Alpha-Numeric Keypad

Letters of the alphabet, symbols, punctuation, and

numbers will display on the navigation screen

as an alpha or numeric keypad. The appropriate

keypad will automatically display whenever

the system needs information from you. The alpha

keypad will display when the system needs

input of a city or street name. The numeric keypad

will display when the system needs input of a

phone number or house address.

Touch a character on the screen to select it. You

may also touch the 0 - 9 screen button at any

time from the alpha keypad to access the numeric

keypad.

U(Space): Touch this screen button to enter

a space between characters or the words of a

name.

V(Backspace): Touch this screen button if an

incorrect character has been selected.

To make name selections easier, the system will

only allow you to select a character which can

follow the last one entered. For example, if a Z is

entered, a T will not be available to select. The

system will highlight the available characters.

If a name is not available after input, it may need

to be inputted differently, the map DVD database

may not contain that information, or the correct

search area has not been selected. See Database

Coverage Explanations on page 59.

20

Page is loading ...

Chevrolet UPLANDER 2007 Navigation Guide

This manual is also suitable for

Chevrolet UPLANDER 2007 Navigation Guide

Related papers

Other documents