SMART BREAKER METERING ACCESSORY
with My Leviton
Getting Started Guide
Cat. No. LSBMA
WEB VERSION
To install and operate the
Smart Breaker Metering Accessory
you will need the following:
Requirements
1. An installed
Leviton Load Center
2. Two-pole breakers
greater than 60 amps.
3. A Smart Hub (LDATA)
WEB VERSION
Use the My Leviton App
to set up your device
Visit http://my.leviton.com on your mobile
device and click your preferred link.
WEB VERSION
Troubleshooting
The My Leviton app contains
a support section including
installation articles and answers
to Frequently Asked Questions.
Contact us Mon.-Fri. 7am-6pm CT
If you need help...
CHAT
www.leviton.com
CALL
1-800-824-3005 (USA only)
1-800-405-5320 (Canada only)
EMAIL
Leviton Manufacturing Co., Inc. 201 North Service Road, Melville, NY 11747
Telephone: 1-800-824-3005. Visit Leviton’s Web site at www.leviton.com
© 2019 Leviton Manufacturing Co., Inc. All rights reserved.
DG-000-LSBMA-02A
LIMITED PRODUCT WARRANTY
For Leviton’s limited product warranty, go to www.leviton.com.
For a printed copy of the warranty you may call 1-800-323-8920.
Copyright and Trademark Information
Google Play and App Store, are the trademarks of their respective owners and any use of such
marks by Leviton is under license. No part of this document may be reproduced, transmitted
or transcribed without the express written permission of Leviton Manufacturing Co., Inc.
WEB VERSION
/