U S E R M A N U A L
Model: MINIDERBY-LS
Attention
1.Please read these operating instructions carefully to familiarize you with basic operations of this unit
BEFORE USE.
2.Without permitted, it is prohibited to spread the contents of this manual to others.
3.This manual is only to provide related information, and the contents of this manual will be changed at any
time without notice.
4.Unless the instructions have already stated, please do not freely modified the unit.
Safety Tips
1. Before installation and maintenance, please confirm the power is OFF. make sure that the ventilation around the unit
is good.
2.The lighting is designed for indoor demonstration, please do not use this product in a wet environment for
long-term.
3.The use and maintenance of this unit should avoid contact with water. when using it outdoor, please take
waterproofing measures.
4.Personnel, who to take the installation, operation and maintenance, must be familiar with the lighting
performance. Most of the damage is resulted from unfamiliar with its performance.
5.Please do not face up to the luminous unit for a long time, so as not to cause discomfort to your eyes.
6.Please often wipe the unit with a clean cloth.
Technical Parameters
Input voltage：AC100-240W
Laser:R:65mw-80mw G:10mw-20mw
LED soure：1W*6(P/A/W/B/G/R) 0.5W*16(W)
Channel：10/16
Rated Power：30W
Mode：Sound /Auto/DMX512/Master-slave
Keys and Display construction
Menu: Function Key
UP: Add
Down: Minus
ENTER: confirmed
MENU
UP DOWN ENT ER
Press Button
Fuction
Fuction Description
Menu
Menu
Main menu:Loops show Shou/Soud/Slnd/Chnd/Addr/Rest/Disp/tESt/LASE/VEr/dEF
Second/Third menu:Press DOWN return to main menu
Main Menu:Press UP to Loops show Shou/Soud/Slnd/Chnd/Addr/Rest/Disp/tESt/
UP
UP
LASE/VEr/dEF
Second/Third menu:Press UP to loop show lase menu fuction(for example:shou to
sh01-sh08)
DOWN
DOWN
Main Menu:Press DOWN to Loops show Shou/Soud/Slnd/Chnd/Addr/Rest/Disp/
tESt/LASE/VEr/dEF
Second/Third menu:Press DOWN to loop show lase menu fuction(for example:shou
to sh01-sh08)
ENTER
ENTER
Press Enter to sub menu,when there is no sub menu,flash 3 times and save settings
Display board LED menu operation:
1.Main menu is view fuction menu,can not confirm
2.Second level menu will flash 3 times and save settings after choice and press enter button
3. Third level menu save the number directly,press ENTER or menu return to last menu
4. Display:The display board will return to show shou(SH**) mode or DMX(d***) mode without pressing the
button ,slave show(SL01)
5. Accept DMX512 singal control,turn to controller mode when connect to controller
Page 1
Remote Controller Operation
Press button
Fuction
Fuction Discription
power
Power on/off
Shou/DMX/tESt mode,press Power to stop,press again to return to work
led
LED on/off
Shou/tESt mode,Press LED to stop,press again to return to work
laser
Laser on/off
Shou/tESt mode,Press LASER to stop,press again to return to work
soud
Sound on
Shou mode,press SOUND to Sound mode
auto
Auto on
Shou mode,press AUTO to Auto mode
dmx
DMX Singal
Press other buttomer,will not accept DMX singal,Press DMX to accept DMX singal Again,
speed+/
UP
When sound mode on,press UP,the lower value,the senstivity greater
sens+
When auto mode on,press UP,the lower value,the auto speed faster
speed-/
DOWN
When sound mode on,press DOWN,the lower value,the senstivity lower
sens-
When auto mode on,press DOWN,the lower value,the auto speed slower
sh01
Show mode
Show1
sh02
Show mode
Show2
sh03
Show mode
Show3
sh04
Show mode
Show4
sh05
Show mode
Show5
sh06
Show mode
Show6
sh07
Show mode
Show7
sh08
Show mode
Show8 random show1 to show7
Page 2
Menu Description
A menu
Secondary
T
hird level
Description
menu
menu
Sh01
Show1
Shou(Show Mode,
Sh02
Show2
Auto and Sound
Sh03
Show3
unify
Sh04
Show4
Sh05
Show5
Sh06
Show6
Sh07
Show7
Sh08
Show8(Loops Show1 to Show7)
Soud
on
Sound Control On,Turn To Sound Contrl Mode
oFF
Sound Control Off,Turn To Auto Mode
(Sound Mode)
SEnS
S000-S100
Sound senstive adjument,press UP/DOWN to control,the higher value,the
greater senstivity(save the number directly)
Slnd(Master-Slave
MAS
Master Mode
SL 1
Slave Mode
Mode)
Chnd(Channel
10CH
DMX Mode,10 Channel Control
Mode)
16CH
DMX Mode,16 Channel Control
Addr(Address)
d001-d512
DMX control mode,Press UP/DOWN to control(save the number directly)
Rest(Rest)
no
Rest Off
YES
Rest On
Disp(Display setting)
dsip
Digital Disolay backward
on
Display on
10oF
Displayed off after 10 seconds without pressing the button
30oF
Displayed off after 30 seconds without pressing the button
60oF
Displayed off after 60 seconds without pressing the button
tESt(Testing)
no
Test Mode Off
YES
Test Mode On
LASE
on
Laser On
oFF
Laser Off
VEr(Software Version)
VEr1
Software Vision
dEF(Factory
no
Factory Setting Reset On
Setting Rest)
YES
Factory Setting Reset Off
Pag
e 3
Page 4
/
