Salsbury Cell Phone Locker Enclosure Installation guide

Brand
Salsbury
Model
Cell Phone Locker Enclosure
Type
Installation guide

Salsbury Cell Phone Locker Enclosure is a free-standing enclosure designed for recessed mounting of cell phone lockers. It provides a secure and convenient way to store and charge cell phones, making it ideal for schools, offices, and other public spaces. The enclosure is made of durable steel and features a front access panel for easy installation and maintenance. It can accommodate up to four 19100 Series recessed mounted cell phone lockers, providing ample storage space for multiple devices.

Salsbury Cell Phone Locker Enclosure is a free-standing enclosure designed for recessed mounting of cell phone lockers. It provides a secure and convenient way to store and charge cell phones, making it ideal for schools, offices, and other public spaces. The enclosure is made of durable steel and features a front access panel for easy installation and maintenance. It can accommodate up to four 19100 Series recessed mounted cell phone lockers, providing ample storage space for multiple devices.

SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: 1-800-624-5269 Int’l Phone: 323-846-6700
Fax: 1-800-624-5299 Int’l Fax: 323-846-6800
www.lockers.com www.mailboxes.com engineering@mailboxes.com engineering@lockers.com
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2021 Salsbury Industries. All rights reserved. (Rev. 03, 3/22/2021) Page 1 of 2
19900 Free-Standing Enclosures
For 19100 Series Recessed Mounted Cell Phone Lockers
Installation Instructions
Installation of the free-standing enclosure requires first installing the enclosure to its mounting surface, then installing the enclosure front panel to the
enclosure and lastly installing the recessed cell phone locker into the enclosure.
Installing Free-Standing Enclosure to Floor
Place the enclosure onto the selected location. Mark the fastener
locations on the mounting surface by transferring the four (4) large
holes locations in the bottom side flanges to the mounting surface.
Remove the enclosure and make the holes for the installation
fasteners. Install the fasteners (not provided). Return the enclosure
to the selected location. Complete the installation of the fasteners.
The use of leveling nuts on stud anchors is suggested.
Installing Enclosure Front Panel
Install the front panel to the enclosure using #10 x 1/2 in. long screws
(provided). Attach it to the enclosure along the two sides and the
bottom.
SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: 1-800-624-5269 Int’l Phone: 323-846-6700
Fax: 1-800-624-5299 Int’l Fax: 323-846-6800
www.lockers.com www.mailboxes.com engineering@mailboxes.com engineering@lockers.com
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2021 Salsbury Industries. All rights reserved. (Rev. 03, 3/22/2021) Page 2 of 2
19900 Free-Standing Enclosures
For 19100 Series Recessed Mounted Cell Phone Lockers
Installation Instructions
Installing Recessed Cell Phone – with Front Access Panel
Install the locker unit into the enclosure by sliding it into the enclosure until its front peripheral flange is flush against the front of the enclosure. Open
the front panel access compartment of the cell phone locker then open the front panel. Install #8 x 1-1/4 in. long screws (provided) through the slots
in the sides of the front peripheral flange of the locker unit into the enclosure. Close the front panel then the front panel access compartment.
  • Page 1 1
  • Page 2 2

Salsbury Cell Phone Locker Enclosure Installation guide

Brand
Salsbury
Model
Cell Phone Locker Enclosure
Type
Installation guide

Salsbury Cell Phone Locker Enclosure is a free-standing enclosure designed for recessed mounting of cell phone lockers. It provides a secure and convenient way to store and charge cell phones, making it ideal for schools, offices, and other public spaces. The enclosure is made of durable steel and features a front access panel for easy installation and maintenance. It can accommodate up to four 19100 Series recessed mounted cell phone lockers, providing ample storage space for multiple devices.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents