Sytech SYXTR69LF is a wireless party speaker with a variety of features to enhance your audio experience. Connect your devices via Bluetooth for seamless music streaming, or use the USB and Micro-SD slots to play music directly from external storage. The speaker also has a built-in FM radio with automatic station search and storage. With its powerful sound and dynamic lighting effects, the Sytech SYXTR69LF is perfect for parties, karaoke nights, or simply enjoying your favorite music at home.
Sytech SYXTR69LF is a wireless party speaker with a variety of features to enhance your audio experience. Connect your devices via Bluetooth for seamless music streaming, or use the USB and Micro-SD slots to play music directly from external storage. The speaker also has a built-in FM radio with automatic station search and storage. With its powerful sound and dynamic lighting effects, the Sytech SYXTR69LF is perfect for parties, karaoke nights, or simply enjoying your favorite music at home.
SY·XTR69LF
WIRELESS SPEAKER
USER
MANUAL
Welcome
Thank you for purchasing the new Wireless party speaker SY-XTR69LF “Ledflow” series”. Please
read this manual carefully before operating your product and pay close attention to the precautions
which are mentioned below. Store this user manual in a safe place for future reference.
Safety Precautions
Points to observe for safe usage
Read this manual carefully before using the product. They contain instructions on how
to use this product in a safe and effective manner. SYTECH will not be responsible
for problems resulting from failure to observe the instructions in this manual.
Turn off the device immediately in case of a problem.
Failure may cause personal injury or damage to the product.
Return it to your authorized SYTECH dealer for repairing.
Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please
dampen the cloth with water only. Any other product such as alcohol, benzene, may
damage the paint or
the plastic.
Temperature
Make sure before using the product, the room temperature is between +35ºC (+95ºF) and -
10ºC (+14ºF)
Maintenance.
If you have problems, do not attempt to repair the unit yourself.
Surface
Place the unit on a flat surface.
Leave enough space around the unit for a proper ventilation.
Heat.
Do not place the product near any heat sources or to direct sunlight.
Accessories.
Use only supplied accessories
IMPORTANT:
THIS PRODUCT CONTAINS MULTIPLE LED LIGHT WHICH CAN CAUSE
INTERFERENCE WHILE ON FM RADIO MODE.
TURN OFF THE LED BUTTON TO PROVIDE A CLEAR AND STABLE FM SIGNAL
RECEPTION.
WHEN LISTENING TO THE RADIO, SOME FM STATIONS MAY NOT BE CLEAR. IT IS
RECOMMENDED TO USE A RADIO APK TO LISTEN VIA BLUETOOTH YOUR
FAVOURITE FM STATIONS.
Precautions on handling the battery
• This unit has a built-in rechargeable lithium battery. (11.1V/6.0 Ah)
• Do not use the battery in a closed room or near fire.
• Charge the battery under the charging condition specified.
• If any corrosion of the terminals, leakage, or deformation of the case of the battery is found, do
not use the battery.
• If the battery leaks, while protecting your hands or clothing, remove the battery from the device
and should be extremely careful not to infect the skin or eyes.
• If the battery leaks and the liquid inside spills on the skin or clothing, immediately wash it off with
plenty of clean water. If the liquid splashes into eyes, immediately flush the eyes with plenty of
clean water and consult a doctor.
• Avoid mixed usage of batteries differing in type, manufacturer or history of use.
• Do not throw the battery in fire nor heat the battery.
• Do not attempt to disassemble, remodel or destroy the battery.
• Do not place the battery near a child.
• The battery is a component which after some time of usage loses its capacity, so it is important to
take good care of it. The warranty for the battery is of 6 months since it is a component that is
limited to a maximum cycle of charges.
Charge fully before storing a battery which has not been in use for a long period and turn
ON/OFF switch off.
Charging the speaker
• Connect the AC adaptor input connector to your speaker.
• Plug in the AC adaptor into the wall outlet.
• The battery indicator LED light will turn red indicating the battery is being charged.
• Once the battery is fully charged, the LED light will turn blue.
• Disconnect the AC adaptor and start using your speaker with the batteries.
NOTE
:
Make sure to charge your speaker only when the battery is completely drained out.
Do not charge the battery when it is still charged as this would cause the battery lifetime to
decrease.
IMPORTANT:
The maximum power output will be lower when the built-in battery is running low.
In an extremely cold or hot environment, charging stops for safety. If charging takes a long
time, it also makes charging of the speaker stop. To resolve these issues, disconnect the
supplied AC power cord (mains lead), and then connect it again within an operating
temperature between 5 °C and 35 °C (41 °F and 95 °F).
Do not charge the speaker's built-in battery in places where the speaker is likely to have
water splashed on it. The supplied AC power cord (mains lead) as well as the jacks and ports
(AC IN/USB/AUDIO IN/MIC) these are not designed for water resistant.
Even if you do not intend to use the speaker for a long time, charge the built-in battery
sufficiently once every 3 months to maintain its performance.
Parts and Accessories
Speaker
1:
LED display 14: Battery indicator light
2: Volume control 15: Power On/Off button
3: Micro-SD port 16: Mic1-Mic2 input
4: USB slot 17: Sound Effect 1
5: Previous Track / Previous FM Station
& 2
18: Sound Effect
6: Play /Pause /Repeat – FM Auto search
3 & 4
19: Indoor/ Outdoor mode
7: Next Track / Next FM Station 20: Microphone voice effects
8: Mode/Shift/TWS function
21: Microphone priority function
9: Record & Delete function 22: Vocal cut function
10: RGB light function 23: Bass control knob
11: Ear mic Input 24: Microphone volume
12: AUX input 25: Echo level control
13: DC adaptor input 26: Remote control sensor
Remote control
1: Power On/Off button
2: Mute
3: Repeat function
4: Mode
5: FM Scan
6: EQ
7: Tune back (-)
8: Tune forward (+)
9: Increase Volume (+)
10: Decrease Volume (-)
11: Previous
12: Next
13: Pay/Pause
14: Numeric Keys
1. Under normal circumstances, the remote control should be aimed directly at the infrared
receiver window of the unit.
The maximum distance for the remote-control operation is approximately 6 meters and
within a 30° angle.
2. When operating the remote control, aim the remote control at the infrared receiver window
of the unit and ensure that there are no obstacles between the remote control and the unit.
3. If the remote receiver is facing direct sunlight, it may fail. In this case, move the speaker
away to avoid the light.
4. Avoid mixing old and new batteries. Replace the remote-control batteries regularly.
Bluetooth Function
• Select the Bluetooth mode by pressing the “MODE” button on the top panel of the unit or from
the remote control itself.
• Please ensure the BT devices you wish to connect has the Bluetooth function enabled and
visible.
• Start the scan function from your device and search for “SY-XTR69LF”.
• Once you have found the device, select it and connect the speaker with the device.
• When the connection is successful, a “tick” tone will be heard. If the speaker can’t be
connected, please restart the speaker or the device and try again.
• After the connection is successfully established, you can begin to play music. To ensure
continuous stability of the music signal, try to keep the BT device and the mobile phone facing
one another.
• The maximum range of distance in Bluetooth mode is approx. 10 meters without barriers.
USB & Micro-SD Slot
USB FUNCTION:
• Make sure your USB flash is formatted as FAT32.
• Insert the USB flash into the USB port of the speaker system.
• The unit should detect the USB automatically and play the first track.
• If in the case the USB does not start automatic playback, press the MODE button and select
MP3 mode.
• If you wish to pause the music, simply press the pause button.
• To select the next track, simply press the “Next” button.
• To select the previous track, simply press the “Previous” button.
NOTE:
1. Make sure the music files are MP3, WAV format or else the music system will not be
able to read the files.
2. Make sure the music files are recorded to the root directory.
3. It is advisable to remove unnecessary files for faster reading of the content.
MICRO-SD CARD FUNCTION:
• Make sure your Micro-SD card is formatted as FAT32.
• Insert the Micro-SD card into the TF slot of the speaker system.
• The unit should detect the Micro-SD card automatically and play the first track.
• If in the case the Micro-SD card does not start automatic playback, press the MODE button, and
select MP3 mode.
• If you wish to pause the music, simply press the pause button.
• To select the next track, simply press the “Next” button.
• To select the previous track, simply press the “Previous” button.
FM Radio Function
This speaker includes a built-in antenna for a better FM reception. However due to the multiple LED
bulbs the speaker under FM mode might not have a clear sound or may have interference.
In this case try moving the unit to another position and try placing it near a window or an open area.
• Press the “MODE” button to switch to FM mode.
• Press and hold the “Pause/Play” button to start the automatic search of the stations.
• The unit will start to search all the main stations and will store them automatically.
• Once the scan search has finalized, press the “NEXT” or “PREVIOUS” buttons to access to the
stored channels.
• The unit will store up to 40 presets.
IMPORTANT: When playing the radio, it is important to switch off the LED lights as this will
cause interference on the radio reception.
NOTE: The FM stations can only be stored automatically. The position of the channel store
number will start from the lowest FM frequency to the highest. The pre-set memories cannot
be memorized manually.
TWS Function
The TWS function allows you to connect two speakers at the same time and lets you enjoy
“True Wireless Stereo” music.
• Select the Bluetooth mode on the two speakers.
• Long press the “TWS” button during 3 or 4 seconds on one of the speakers.
• A beep sound will be heard confirming the pairing of the two speakers.
• Connect your mobile device via Bluetooth the speaker.
• Play the track from your mobile device and enjoy True Wireless Stereo experience as each
speaker will act as left and right.
• To exit the TWS mode, simply long press the “TWS” button.
Recording and Deleting Files
RECORDING FUNCTION:
• Before recording make sure the inserted USB/TF Card is formatted as FAT32.
• Connect the wired microphone to the MIC1 input. If in the case you wish to connect a second
microphone, use the MIC 2 input.
• Turn the echo effect to the minimum level to obtain a better-quality recording.
• Press the REC/DEL button once to start recording.
• Once finished, press the button once again to stop the recording.
• The recorded files will be saved on the USB or TF card.
NOTE: While recording, the music, sound effects as well and the vocal cut effects will not
operate.
DELETING A FILE:
• Access the file you want to delete from the USB or TF card
• To delete a recorded file, press and hold the REC/DEL button.
• Your file will be deleted.
Wired Microphone Usage
CONNECTING THE MICROPHONE:
• Connect the supplied wired microphone to the MIC 1 input jack located on the top panel of
the speaker (16).
• To control the volume of the MIC, turn the knob MIC (24) clockwise to increase volume or
anti-clockwise to decrease the volume.
VOCAL CUT
• The Vocal Cut function is best used for karaoke.
• Make sure your microphone is connected to the speaker.
• Play a song from your device via Bluetooth, USB and then short press the Vocal cut button
(22).
• This function cancels the original vocal track on the song, keeping only the instrumental.
• Enjoy singing with your favorite instrumental songs.
MIC PRIORITY
• The Mic Priority function enables you to talk on the microphone whilst music is playing. The
music track volume will automatically lower down when speaking making it easier for the
crowd to hear you.
• Connect the microphone to the speaker.
• Short press the Mic Priority function (21).
• Now Mic priority function is enabled.
• Press it one more time to disable the function.
MICROPHONE SOUND EFFECTS:
• This function allows you to transform your voice when speaking from the microphone.
Variable sound effect Are available as below:
• Normal voice
• Man’s voice
• Girl’s voice
• Kids voice
• Old man’s voice
To enable this function just short press the Microphone Sound Effects button (20). Keep on pressing
to cycle between the different sound effects.
Repeat Function
The repeat function has 4 different modes:
• ALL- Play all the tracks in sequence order.
• RAND- Play tracks in a randomized order.
• ONE- Repeat one track.
• FOL- Repeat all the tracks in the folder
Indoor / Outdoor Modes
The Indoor/Outdoor mode is used when switching the speaker from a closed environment to an open
environment.
• Press once to switch to outdoor mode. The music playing will then have the “outdoor scene
sound effect” on. “OUT” will appear on the LED display.
• Press again to switch to indoor mode. The music playing will then have the “indoor scene
sound effect” on. “IN” will appear on the LED display.
Sound Effects
The speaker includes 4 programmed sound effects. Short press or long press the buttons to switch
between the following effects:
• Opening
• Laughter
• Applause
• Awkward
Technical specifications
NOTE: Above specifications are the specifications of SY-XTR69LF “Ledflow Series” and
are for reference purpose only. Due to continuous product development, specifications
may be subject to change without prior notification. Do not expose to adverse weather
conditions (Such as rain or high temperatures) as it can cause malfunctions.
Basic Specifications
• High resistant material finishing
• Bluetooth & TWS function
• FM tuner with preset memory stations
• LED display indicating track number
• RGB flame lights integrated on the
speaker
• Recording function & Mic priority
• Aux in feature
• Rechargeable battery
• Remote control
• Wired microphone
•
USB/TF card Specifications
• 2.0 USB Port (Max Capacity : 32GB)
• TF Card Slot (Max Capacity: 32GB)
• Compatible Audio Formats in USB:
MP3/WAV
• Compatible Audio Formats in TF:
MP3/WAV
Bluetooth Specifications
• Bluetooth Module: AB5301A
• Bluetooth Version: V5.0 + EDR
• Bluetooth Support 5.0
• Bluetooth Profiles: A2DP, AVRCP
• Bluetooth Pairing name: SY-XTR69LF
Technical Specifications
• RMS Output power: 60W
• PMPO output power: 135W
• SNR: ≥125dB
• Frequency response: 100Hz-20 kHz
• Battery capacity: 6000mAh – 11.1V
• Power supply: AC100V- AC240V,
60Hz/50Hz
DC 13.5V- 1.5A
• 2 ways speakers: 2 x 6.5” Woofer
1 x 1.5” tweeter
Weight: 7.7 Kg
Dimension: 26 x 25,8 x 60 cm.
Troubleshooting
Fault Possible Cause Solution
No sound • No input sound source.
• Volume is too low.
• Use a better music signal.
• Adjust the volume.
Distortion
of sound • Volume too high.
• Speaker may be damaged.
• Turn down the volume.
• If speaker is damaged,
contact the technical
department.
Karaoke
does not
work
• Microphone plug is not fully
inserted.
• Microphone switch is not on.
• Microphone volume knob is
at the lowest position.
• Wireless microphone has
low battery.
• Plug microphone properly
into the socket.
• Turn on microphone switch.
• Adjust microphone volume
properly.
• Replace battery.
MP3 does
not play
• The song format in the USB
disc is incorrect.
• Improper operation has
caused a process disorder.
• USB disc/TF is
disconnected.
• Transform song format into
Mp3 format.
• Reboot the machine.
• Insert the USB disc/TF
properly.
Declaration of conformity
Manufacturer Name: Satyatrade S. L.
Address: Pol. Ind. La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: Wireless Party Speaker
Sytech® SY-XTR69LF complies with the following directives:
EMC Standard : Directive 2014/30/EU
LVD Standard: Directive 2014/35EU
ROHS standard: 2011/65/EU Restriction of Hazardous Substance
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
www.sytech.es
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Sytech SYXTR69LF User manual
- Type
- User manual
- This manual is also suitable for
Sytech SYXTR69LF is a wireless party speaker with a variety of features to enhance your audio experience. Connect your devices via Bluetooth for seamless music streaming, or use the USB and Micro-SD slots to play music directly from external storage. The speaker also has a built-in FM radio with automatic station search and storage. With its powerful sound and dynamic lighting effects, the Sytech SYXTR69LF is perfect for parties, karaoke nights, or simply enjoying your favorite music at home.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sytech SYXTR62BT Owner's manual
-
-
-
-
-
-
-
-
-
