Bresser 4750129 Owner's manual

4750129
Bresser
Brand
Bresser
Model
4750129
Category
Cable clamps
Type
Owner's manual
GB
INSTRUCTION MANUAL
Smartphone Holder
for 1/4" connection thread
GENERAL WARNINGS
DANGER OF MATERIAL DAMAGE!
Only use this product as an accessory on devices with the appropriate
technical requirements.
When installing, make sure to secure the clamps well to avoid
dropping your smartphone.
The manufacturer accepts no liability for damage to the device
itself or to alternative devices (optics, smartphone, etc.) caused by
improper handling.
SCOPE OF DELIVERY (Fig. 1 )
Smartphone holder (1 pc.)
TECHNICAL DATA
Designation Smartphone Adaptor
Mounting type: horizontally or vertically via 1/4" female thread
on devices with corresponding 1/4" male thread
(e.g. photo tripod, telescope device or similar)
GENERAL ASSEMBLY INSTRUCTIONS
Check whether the technical requirements for mounting this
accessory on the desired device are met.
Before assembly, remove all accessories from the packaging and
check for completeness.
Fig. 1
ASSEMBLY
1. (Fig. 2 + 2a) Place holder in
desired position on existing
base with 1/4" thread (1) and
screw on (2).
2. (Fig. 3) Pull out the clamp (3),
push in the smartphone
1)
(4)
and retract the clamp (5).
Fig. 2
1/4"
ASSEMBLY EXAMPLES
PhotoAstro
Fig. 2a
1/4"
1) Smartphone not included. / Errors and technical changes excepted. / Manual_Smartphone-Holder-Messier_en_BRESSER_v012021a.
Bresser GmbH
Gutenbergstr. 2
46414 Rhede - Germany
 @BresserEurope
Contact
Fig. 3
  • Page 1 1

Bresser 4750129 Owner's manual

4750129
Bresser
Brand
Bresser
Model
4750129
Category
Cable clamps
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents