Kenwood KDC-5019 User manual

Category
Car media receivers
Type
User manual

This manual is also suitable for

KENWOOD
KDC-519
KDC-5019
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
KENWOOD CORPORATION
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, In the spaces aesignated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your KENWOOD dealer for information or service on the product.
Model KDC619/ 5019 Serial number
“P
0 B64-2148-00 (K)
Ill
.
menus
.c
Varning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
iafety precautions . . . . . . . . . . . . . . . . . . . . . . 4
Ibout CDs
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..-.
6
3eneral features
. . . . . . . . . . . . . . . . . . . . . . . . . 7
Power
Selecting the Source
Volume
Attenuator
CD/External disc control
Basic Operations of remote......21
features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
Loading and Replacing the battery
Playing CD
Basic operations
Playing External DISC
In Tuner source
Fast Forwarding and Reversrng
In Disc source
Track Search
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Album Search
Drrect Track Search
Installation
Procedure
. . . . . . . . . . . . . . 23
Drrect Album Search
Connecting Wires to Terminals 24
Loudness
System Q
Audio Control
Speaker Settrng
Switchrng Drsplay
Switching Clock Display
Station/Drsc Naming (SNPS/DNPS)
Auxrliary Input Display Setting
Faceplate Angle Adjustment
Theft Deterrent Faceplate
Hiding the Control Panel
Tuner features . . . . . . . . . . . . . . . . . . . . . . . .
Tuning Mode
Tuning
Direct Access Tuning
Station Preset Memory
Auto Memory Entry
Preset Tuning
. . .
12
Track/Album Repeat
Track Scan
Random Play
Magazine Random Play
Textntle Scroll
DNPP (Disc Name Preset Play)
Menu system
,............................
18
Menu System
Security Code
Touch Sensor Tone
Manual Clock Adjustment
Selectable Illumination
Switching Graphic Display
Contrast Adjustment
Dimmer
OFF Wait Time Settrng
CRSC (Clean Reception System Circuit)
Text Scroll
installation
(nonJapanese
cars)
..............
-25
(Japanese-cars). .....................
.25
Removing the
Unit..
.................
.26
Locking the faceplate
to the unit
..............................
26
Troubleshooting
Guide
............
.27
Specifications
...........................
30
A
Warning
(
Use of controls or adjustments or performance
of procedures other than those specified
herern may result in hazardous radiation
exposure.
In compliance with Federal Regulations,
following are reproductions of labels on, or
inside the product relatrng to laser product
safety.
/ KENWOOD CORPORATION
I
2967-3, ISHIKAWA-CHO,
HACHIOJI-SHI
TOKYO, JAPAN
I\KENWOOD CORP CERTIFIES THIS EQUIPMENT 11
CONFORMS TO DHHS REGULATIONS NO.21 CFR
1040. 10. CHAPTER 1, SUBCHAPTER J
Location : Bottom Panel
FCC WARNING
Thus equipment may generate or use radio
frequency energy. Changes or modrficatrons to
thus equrpment may cause harmful
interference unless the modifrcatrons are
expressly approved In the rnstruction manual.
The user could lose the authorrty to operate
thus equipment If an unauthorrzed change or
modificatron
IS
made
I
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protectron against harmful
interference in a residential installation. This
equipment may cause harmful interference to
radio communications, if it is not installed and
used In accordance with the instructions.
However, there is no guarantee that
interference wrll not occur in a particular
Installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the Interference
by one or more of the followrng measures:
l Reorient or relocate the receiving antenna.
l Increase the separation between the
equipment and receiver.
l Connect the equrpment Into an outlet on a
crrcurt different from that to which the
recerver
IS
connected.
l Consult the dealer or an experienced
radio/TV technician for help.
This Class B drgrtal apparatus compiles with
Canadian ICES-003.
PP
-3-
Safety precautions
c
I AWARNING I
I I
To prevent injury or fire, take the
following precautions:
l Insert the unrt all the way In until It IS fully
locked In place. Otherwrse It may fall out of
place when jolted.
l When extending the rgnrtron, battery, or
ground wires, make sure to use automotrve-
grade wares or other wires wrth a 0 75mm’
(AWGI 8) or more to prevent wire
detenoratron and damage to the wire
coatrng.
l To prevent a short crrcurt, never put or leave
any metallic objects (such as corns or metal
tools) insrde the unit.
l If the unit starts to emit smoke or strange
smells, turn off the power Immediately and
consult your Kenwood dealer.
l Make sure not to get your fingers caught
between the faceplate and the unit.
l Be careful not to drop the unit or subject It to
strong shock
The unit may break or crack because It
contains glass parts.
l Do not touch the liquid crystal fluid If the
LCD is damaged or broken due to shock. The
liquid crystal fluid may be dangerous to your
health or even fatal.
If the liquid crystal fluid from the LCD
contacts your body or clothing, wash It off
with soap immediately.
1 ACAUTION 1
I I
To prevent damage to the machine,
take the following precautions:
l Make sure to ground the unit to a negative
12V DC power supply.
l Do not open the top or bottom covers of the
unit
l Do not Install the unit rn a spot exposed to
direct sunlight or excessrve heat or humidity.
Also avoid places with too much dust or the
possrbility of water splashing.
l Do not subject the faceplate to excessive
shock, as It is a piece of precision
equipment.
l When replacing a fuse, only use a new one
wrth the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.
l To prevent a short circuit when replacrng a
fuse, first disconnect the wiring harness.
l Do not place any object between the
faceplate and the unrt.
l Do not use your own screws. Use only the
screws provided. If you use the wrong
screws, you could damage the unit.
l Do not apply excessive force to the moving
faceplate. Doing so will cause damage or
malfunction.
l Do not apply excessive force to the open
faceplate or place objects on it. Doing so will
cause damage or breakdown.
IMPORTANT INFORMATION
About the disc changer to be
connected:
To connect a disc changer having the “O-N”
switch to this unit, set the “O-N” switch to “N”.
When you connect a model with no “O-N”
switch, the converter cord CA-DSI 00 available
as an option may be required. For details,
consult your Kenwood dealer.
A disc changer doesn’t work when it IS
connected without using these options.
If a model with no “O-N” switch is connected,
some unavailable functions and information
that cannot be displayed are generated.
Note that none of the KDC-CIOO, KDC-C302,
C205, C705, and non-Kenwood CD changers
can be connected.
A
You
can damage
both your unit and the CD
changer If you connect them mcorrectly.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with Its adapter
into the unrt, the adapter might separate from
the CD and damage the unit.
-4-
1 NOTE 1
l If you experrence problems during
installation, consult your Kenwood dealer.
l If the unit falls to operate properly, press the
Reset button. The unit returns to factory
settings when the Reset button IS pressed.
If the unit stall falls to operate properly after
the Reset button has been pressed, contact
your local KENWOOD dealer for assrstance.
l Press the reset button if the disc auto
changer fails to operate correctly. Normal
operatrn should be restored.
Rese’t button
l We recommend the use of the Securrty
Code functron (see p. 18) to prevent theft.
l Characters in the LCD may become difficult
to read In temperatures below 41 *F (5 “Cl.
l The rllustratrons of the drsplay and the panel
appearing rn this manual are examples used
to explain more clearly how the controls are
used. Therefore, what appears on the display
In the rllustratrons may differ from what
appears on the display on the actual
equipment. and some of the rllustratlons on
the display may represent something
Impossible rn actual operation.
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called
lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a while,
consult your Kenwood dealer.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, wrpe them with a dry, soft cloth.
Cleaning the Unit
If the faceplate of this unit is stained, wipe It
with a dry soft cloth such as a srlrcon cloth.
If the faceplate IS stained badly, wipe the stain
off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
A
Applyrng spray cleaner directly to
the unit may
affect its mechanical parts. Wlplng the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters
Cleaning the CD Slot
As dust tends to accumulate In the CD slot,
clean rt every once In a while. Your CDs can
get scratched if you put them in a dusty CD
slot.
About CDs
Handling CDs
l Don’t touch the recording surface of the CD.
l CD-R and CD-RW are easrer to damage than
a normal mustc CD. Use a CD-R or a CD-RW
after reading the cautron Items on the
package etc.
l Don’t stick tape etc. on the CD.
Also, don’t use a CD with tape stuck on It.
CD cleaning
Clean from the center of the drsc and move
outward.
Removing CDs
When removrng CDs from thus unrt pull them
out horrzontally.
CDs that can’t be used
l CDs that aren’t round can’t be used
When using a new CD
If the CD center hole or outside nm has burrs,
use It after removing them with a ball pen etc.
l CDs wrth colorrng on the recording surface
or that are dirty can’t be used.
l Don’t use CDs wrthout disc mark
tip ImE m72
O,“,_.Y*a w w
*A CD-R or CD-RW that hasn’t been finalrzed
can’t be played. (For the finalization process
refer to your CD-R/CD-RW writrng software,
and your CD-R/CD-RW recorder instructron
manual.)
CD accessories
Don’t use disc type accessories.
CD storage
l Don’t place them in direct sunlight (On the
seat or dashboard etc.) and where the
temperature is high.
l Store CDs in their cases.
-6-
General features
A/”
SRI! AM
FM ANG
r I II
ATT/-LOU0
OISP/~AME.S
w4i-
C~K ainuo
Clock indicator
ATT indiato,
Speaker Setting
SYSTEM 0 mdicatm
indicator
Turning ON the Power
Turn the vehicle ignition ON.
The faceplate reverses and control panel IS dlsplayed.
Turing OFF the Power
Turn the vehicle ignition OFF.
When the set time for removing the faceplate (page 20) lapses,
the faceplate reverses and the control panel is hidden.
A
Do not apply force to the faceplate during operation. It can cause
damage.
@
When the power IS ON, the <Security Code> (page 18) IS dlsplayed
as “CODE ON” or “CODE OFF”.
Press the [SKI button.
Source required
Display
Tuner
“TUNER”
CD
“CD”
External disc
“DISC”/“CD2”
Auxlllary Input
“AUX”
Standby (Illumination only mode)
“ALL OFF”
@
For Auxiliary input one of the below optIonal accessows IS
necessary
KCA-S21 OA
CA-Cl AX
CD changer with an Auxiliary Input function installed.
-7-
Increasing Volume
Press the [A] button.
Decreasing Volume
Press the [VI button.
Press the [Ql button.
Each time the button IS pressed the sound setting switches.
Sound setting
Display
Flat
“Flat”
Rock
“Rock”
Top 40
“Top 40”
Pops
“Pops”
Turning the volume down quickly.
Press the [ATT] button.
Each time the button
IS
pressed the Attenuator turns ON or OFF.
When it’s ON, the “ATT” indicator blinks.
Easy
Scan of Flat - Easy
User memory
“Easy”
“Scan”
“User”
l
User memory. The values set on the <Audio control> (page 81
l
Each setting value IS changed with the <Speaker setting> (page
9)
First, select the speaker type with the Speaker setting
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it’s ON, “LOUD ON” is displayed.
You can recall the best sound setting preset for different types of
the music.
1
Select the source to set
Press the [SRCI button.
2 Select the Sound type
-8
1
Select the source for adjustment
Press the [SRCl button.
I
2 Enter Audio Control mode
Press the [AUDI button for at least 1 second.
3 Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button IS pressed the Items that can be adjusted
switch as shown below.
4 Adjust the Audio item
Press the [14+1 or [WI] button.
Adjustment Item Display
Range
Bass level
Middle level
‘“Bass”
“Middle”
-8 - +8
-8 - +8
Treble level
“TI
Balance
“B
Fader
“F
Volume offset
“V
@
Volume offset Each
SC
from thl
5 Exit Audio Control mod1
Press the [AUDI button.
Fine-tuning so that the Sysi
the speaker type.
1
Enter Standby
Press the [SRCI button.
Select the “ALL OFF” dls(:
2 Enter Speaker Setting r
Press the IQ1 button.
3 Select the Speaker typf
Press the
W4
or [WWI
Each time the button IS F
below.
Speaker type
OFF
For 6 & 6x9 In. speaker
For 5 & 4 in. speaker
For the OEM speaker
4 Exit Speaker Setting m
Press the [Ql button.
rd setting switches.
play
rck”
p 40”
Treble level
“Treble”
Balance
“Balance”
Fader
“Fader”
Volume offset
“V Offset”
-8 - +8
Left 15 - Right 15
Rear 15 - Front 15
-8--O
.er”
Audro control> (page 8)
<Speaker setting> (page
Speaker settrng
!cond.
s that can be adjusted
ange
3-+8
3-+8
Volume offset. Each source’s volume can be set as a drfference
from the basic volume.
5 Exit Audio Control mode
Press the [AUDI button.
I
Fine-tuning so that the System Q value is optimal when setting
I
the speaker type.
1
Enter Standby
Press the [SRCl button.
Select the “ALL OFF” drsplav.
2 Enter Speaker Setting mode
Press the IQ1 button.
3 Select the Speaker type
Press the [1+4 or [))I] button.
Each trme the button IS pressed the settrng switches as shown
below.
Speaker type
Display
OFF
“SP OFF”
For 6 & 6x9 In. speaker
For 5 & 4 In. speaker
For the OEM speaker
4 Exit Speaker Setting mode
Press the IQ1 button.
“SP 6*9/6rnch”
“SP 5/4rnch”
“SP O.E.M.”
Switching the information displayed.
Press the [DISPI button.
Each time the button is pressed the display switches as shown
below
In Tuner source
Information
Display
Frequency
Statron name
“SNPS”
In CD & External disc source
Information
Display
Track Ime
DISC name
“DNPS”
DISC
trtle (In External disc source)
“D-TITLE”
Track tttle (In External drsc source)
“T-TITLE”
General features
Switching the displayed information.
Press the [CLKI button.
Each trme the button IS pressed It swatches between clock
drsplay and current source.
During clock drsplay the clock rndrcator IS ON
Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to attach a title to
@
l
A trtle can’t be attached to a MD
l
DISC Namrng can’t be done during CD text display.
2 Enter name set mode
Press the [NAME.SI button for at least 2 seconds.
“NAME SET” is displayed.
3 Move the cursor to the enter character position
Press the
[HI
or [))I] button.
4 Select the character type
Press the [)II] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5 Select the characters
Press the [FM] or [AM] button.
-
-1
Characters can be entered by using a remote with a number
buttons.
Example If “DANCE” IS entered
Character
Button
#Times pressed
“D”
w31
1
,‘A’#
[#21
1
“N”
[#61
2
“C”
H21
3
“E”
I++31
2
6
Repeat steps 3 through 5 and enter the name.
7 Exit name set mode
Press the [NAME.SI button
l When operatron stops for 10 seconds the name at that trme IS
regrstered. and Name Set mode closes.
l
Memory numbers
FM. 32 statrons
AM 16 statrons
Internal CD player 30 discs
External CD changer/ player, Varies
according to the CD changer/
player. Refer to the CD changer/ player manual
l
The title of statron/CD can be changed by the same operatron
used to
name It
Selecting the display when this device is switched to Auxiliary
input source.
1
Select Auxiliary input source
Press the WW button.
Select the “AUX’ display.
2 Enter Auxiliary input display setting mode
Press the [DISPI button for at least 2 seconds.
O-
The presently selected
3 Select the Auxiliary ir
Press the [1+4] or [,c
Each trme the button I:
drsplays.
. “AUX”
. “TV”
. “Vcp”
. “GAME”
0 “PORTABLE”
4 Exit Auxiliary input di
Press the [DISPI butte
@
When operation sto
selected, and Auxrlr,
Press the [ANGI butte
@
Do not apply exces’
I a remote with a number
#limes pressed
The presently selected AUX Name is displayed.
1
3
2
r the name.
lnds the name at that time is
:loses
rles according to the CD changer/
/player manual
nged by the same operation
: is switched to Auxiliary
1g mode
2 seconds.
3 Select the Auxiliary input display
Press the [1r41 or [))I] button.
Each time the button is pressed It switches through the below
displays.
. “Al-IX”
. “TV”
. “VCP”
l “GAME”
l “PORTABLE”
4 Exit Auxiliary input display setting mode
Press the [DISPI button.
@
When operation stops for 10 seconds, the name at that time IS
selected, and Auxlllary Input display setting mode closes.
Press the LANG] button for at least 1 second.
@
Do not apply exceswe force to the faceplate It can cause damage
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate
1
Turn the ignition OFF or press the [SRCI button for at least 1
second.
The power turns OFF and the faceplate slides open.
2 Holding the center part of the faceplate pull it out.
-ll-
A
l
When the faceplate IS kept remove open, according to the <OFF
Walt Time Setting> (page 20) setting, the faceplate IS hldden and
the power turns OFF
l
The faceplate IS a preclslon piece of equipment and can be
damaged by shocks or loIts For that reason, keep the faceplate in
Its special storage case while detached.
l
Do not expose the faceplate or Its storage case to direct sunlight
or excessive heat or humldlty Also avoId places with too much
dust or the posslblllty of water splashing
Reattaching the Faceplate
1
Set the left side of the faceplate in the faceplate bracket
2 Press dhe right side of the faceplate until it locks.
s
. General features
c
->
.
M
Prevents tampering with the unit while your car is being serviced
etc.
Hiding the control Dane/
Pr&s the [SRCI bitton for at least 1 second.
The faceplate slides open.
When the time set rn <OFF Wart Trne Settrng> (page 20) lapses,
the faceplate IS hrdden and the power turns OFF
Showing the control panel
Press the left part at the upper side of the faceplate.
The faceplate WIII open and show the control panel.
Si?C AM FM
I I
I
I I-I
#l -6
AUTO / AME 144 / ,)I
Band display
Frequency display
Preset station number
I
ST indicator
-12-
Choose the tuning mode.
Press the [AUTO] buttor
Each time the button IS p
shown below.
Tuning mode
Displal
Auto seek
“Auto1
Preset station
“Auto2
Manual
“Manu;
Selecting the station.
1
Select tuner source
Press the WiCI button.
Select the “TUNER” drspl
2 Select the band
Press the [FM1 or IAMI
Each time the [FM1 butt<
FMI, FM2, and FM3 bar
3 Tune up or down band
Press the H4 or
bW
@
Durrng receptron of S
SRC AM
FM
--
I I
AUTO / AME I.. I ..I
zquency display
Preset station number
Choose the tuning mode.
Press the [AUTO] button.
Each time the button is pressed the Tuning mode switches as
shown below.
Tuning mode
Display Operation
Auto seek
“AutoI’ Automatic search for a statlon.
Preset station
“Auto2”
Search in order of the statlons
seek
in the Preset memory.
Manual
“Manual” Normal manual tuning control.
Selecting the station.
1
Select tuner source
Press the [SRCl button.
Select the “TUNER” display
2 Select the band
Press the [FM] or [AMI button.
Each time the [FM] button IS pressed It switches between the
FMI, FM2, and FM3 bands.
3 Tune up or down band
Press the [I++ or [WW] button.
@
During reception of stereo statlcns Ihe “ST Indicator IS ON
Entering the frequency and tuning.
1
Select the band
Press the [FM1 or [AMI button.
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
The “- - - -” display.
3 Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency
Press button
92.1 MHz (FM)
km w91, MQI,
[#II
810
kHz (AM) WOI, [#81, WI,
WOI
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote
Putting the station in the memory.
1
Select the band
Press the [FM] or [AM] button
2 Select the frequency to put in the memory
Press the I1441 or [@HI button.
3 Put the frequency in the memory
Press the [#I] - [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 statlon can be put In the memory on each [#II
- WI61 button.
e
If
- 13-
Tuner features
1
Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2 Open Auto Memory Entry
Press the LAME1 button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
Calling up the stations in the memory.
1
Select the band
Press the [FM] or [AM] button.
2 Call up the station
Press the [#I 1 - [#61 button.
.,I
SRC AM FM
l-l-l-l-l-l
SCAN RDM REP
M.RDM DISP IH~/WWI
I
Track number Pack time Disc number
-14-
When a CD isn’t inser
1
Slide open the facep’
Press the [Al button.
2 Insert a CD.
A
When the
faceplati
shift lever or sxne
and move
the shift
the unit.
@
0 The sound will bc
moving
l
Whet- a CD IS in:
When a CD is inserte
Press the [SRCI butt
Select the “CD” displa
Pause and play
Press the
[FIII
butte
Each time the button
Eject the CD
1
Eject the CD
Press the [A] buttor
2 Close the faceplate
Press the [A.] buttor
res
--
l I
OISP 1.4 / ..I
rack time D&c number
i/V mdicatoi
When a CD isn’t inserted
1
Slide open the faceplate
Press the [Al button.
2
Insert a CD.
A
When the faceplate has been sled open, It might Interfere with the
shift lever or somethrng else If this happens, pay attention to safety
and move the shift lever or take an appropnate actron, then operate
the untt.
@
l
The sound wrll be temporarrly muted while the faceplate IS
moving.
l
When a CD IS Inserted, the “IN’ rndrcator IS ON.
When a CD is inserted
Press the [SRCI button.
Select the
“CD” display.
Pause and play
Press the [PII] button.
Each trme the button is pressed the CD pauses and plays.
Eject the CD
1
Eject the CD
Press the 161 button.
2 Close the faceplate
Press the [Al button.
A
3 rn (8cm) CD carnnot be played Usrng an adapter and tnsertrng
them Into tl?ls unit can cause damage
Playing discs set in the optional accessory disc player connected
to this unit.
Press the [SRCI button.
Select the display for the disc player you want.
Display examples:
Display
Disc player
“CD2”
CD player
“DISC”
CD
changer/MD changer
Pause and play
Press the [FM] button.
Each trme the button IS pressed rt pauses and plays.
@
l
DISC #IO IS displayed as “0’.
l
The functrons that can be used and the rnformatron that can be
drsplayed wrll doffer dependrng on the external disc players berng
connected
Fast Forwarding
Hold down on the [w~I] button.
Release your finger to play the drsc at that point
Reversing
Hold down on the
[I++
button.
Release your finger to play the disc at that point
- 15-
CD/External disc control features ^
Press the [144 or [))I] button.
Press the [AM] or [FM1 button.
Doing Track Search by entering the track number.
1
Enter the track number
Press the number buttons on the remote.
2 Do Track Search
Press the [144 or [))I] button.
Canceling Direct Track Search
Press the [~I11 button.
Doing Disc Search by entering the disc number.
1
Start Track Scan
Press the [SCAN] button.
“Scan ON” IS displayed.
1
Enter the disc number
Press the number buttons on the remote.
2 Release it when the song you want to listen to is played
Press the [SCAN] button.
-'16-
2 Do Album Search
Press the [DISC+] or [DISC-I button.
Canceling Direct Album Search
Press the 1,111 button.
Input
“0”
to
select disc 10
Replaying the track/disc you’re listening to.
Press the [REP] button.
Each time the button IS pressed the Repeat Play switches as
shown below.
Repeat play
Display
Track Repeat
“Repeat ON”rT-Repeat ON”
Album Repeat
“D-Repeat ON”
iFunctIon of disc changer)
OFF
“Repeat OFF”
Playing the first part of each song on the disc you are listening
to and searching for the song you want to listen to.
I
Playing all the songs on the (
Press the [RDMI button.
Each time the button IS pre
When It’s ON, “Random 01
Play the songs on all the disl
order.
Press the [M.RDMl buttot
Each time the button is prc
ON or OFF
When It’s ON, “M Random
@
When the [~Fll button
Scrolling the displayed CD tc
Press the [DISPI button fl
Play switches as
3N”/“T-Repeat ON”
it ON”
3FF”
s pressed Random Play turns ON or OFF.
m ON” IS dlsplayed.
@
When the
I-11 button IS pressed, the next song select starts.
Play the songs on all the discs in the disc changer in random
order.
Press the [M.RDMl button.
Each time the button IS pressed the Magazine Random Play turns
ON or OFF.
When it’s ON, “M.Random ON”
IS
displayed
@
When the I))11 button IS pressed, the next song select starts
:en to.
Scrolling the displayed CD text or MD title.
Press the [DISPI button for at least 1 second.
Selecting the CD displayed in the DNPS of the CDs set in the
Disc changer.
1
Enter DNPP mode
Press the [DNPPI button on the remote.
When “DNPP” is displayed the DNPS display in order.
Forward / Reverse display
Press the [DISC-l or [DISC+] button.
2 When the disc you want is displayed
Press the [OK] button on the remote.
The disc being displayed IS played.
Canceling the DNPP mode
Press the [DNPPI button on the remote.
en to is played
1
- 17-
iii,
Menu svstem
a*
SRC AM FM
1-1-r
DISP I.. /tbl MENU
Setting during operation beep sound etc. functions.
The Menu system basic operation method is explained here. The
reference for the Menu items and their setting content is after
this operation explanation.
1
Enter Menu mode
Press the [MENU] button for at least 1 second.
“MENU” IS dlsplayed.
2 Select the menu item
Press the [FM1 or [AM] button.
Example. When you want to set the beep sound select the
“Beep” display.
3 Set the menu item
Press the
I144
or [))I] button.
Example: When “Beep” IS selected, each time the button is
pressed It switches “Beep ON” or “Beep OFF”. Select 1
of them as the setting.
You can continue by returning to step 2 and setting other Items.
4 Exit Menu mode
Press the [MENU] button.
@
When other Items that are applicable to the basic operation method
above are dlsplayed afterwards their setting content chart IS
entered. (Normally the uppermost setting I” the chart IS the original
setting.1
Also, the explanation for Items that aren’t applicable (<Manual Clock
Adjustment>etc.) are entered step by step.
Security Code is a help in preventing theft.
- 18-
@
When the Se
changed and
Note, the Se
choice
1
Enter Standby
Press the [SRCI
Select the “ALL (
/
2 Enter Menu mo
Press the [MEN
When “MENU”
I:
3 Enter Security (
Press the 11441
When “ENTER” I
4 Enter the Secul
Press the I#11 -
Example: If the
Step
1
2
3
4
I
I
5
Confirm the SE
Press the IDISF
When “RE-ENTE
6
Do the step 4 i
code.
“APPROVED” is
The Security Cc
@
When a Co
Press the Reset
/
battery power s
,
functions.
d is explained here. The
!tting content is after
second.
p sound select the
trme the button is
or “Beep OFF”. Select
Ind settrng other Items
the basic
operation method
tlng
content
chart IS
g I” the chart IS the origInal
‘t applicable (<Manual Clock
ep
le is required when it’s
his unit is by using the
When the Security Code function IS activated, the code can’t be
changed and the function can’t be released.
Note, the Security Code can be set as the 4 digit number of your
choice.
1
Enter Standby
Press the [SRCI button.
Select the “ALL OFF” drsplay
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
When “MENU” IS drsplayed, “Security” IS displayed.
3 Enter Security Code mode
Press the [~rrl or [WW] button for at least 1 second.
When “ENTER” IS drsplayed, “CODE” IS displayed.
4 Enter the Security Code
Press the [#II - [#41 button.
Example- If the Security Code IS “3510”.
Step Button
#limes pressed
Display
1
[#I 1
4
“3”
2
[#21
6
“5’s
3
w31
2
"1
4
w41
1
“0”
5 Confirm the Security Code
Press the [DISP] button for at least 3 seconds.
When “RE-ENTER” IS displayed, “CODE” is displayed.
6
Do the step 4 and 5 step operation, and reenter the security
code.
“APPROVED” IS displayed.
The Securrty Code functron actrvates.
@
When a Code different from step 4 IS entered, repeat from step 4
Press the Reset button and when it’s removed from the
battery power source
1
Turn the power ON.
2 Do the step 4 and 5 operation, and enter the Security Code.
“APPROVED” IS displayed.
The unit can be used.
Setting the operation check sound (beep sound) ON/OFF.
Display
Setting
“Beep ON”
Beep is heard.
“Beep OFF”
Beep canceled.
1
Select Clock Adjustment mode
Press the [FM] or
[AMI
button.
Select the “Clock Adjust” display.
2 Enter Clock Adjust mode
Press the [144] or [)~ll button for at least 1 second.
The clock display blanks.
3 Adjust the hours
Press the [FM] or [AMI button.
Adjust the minutes
Press the [I++] or &WI button.
4 Exit Clock adjustment mode
Press the [MENU] button.
Selecting the button illumination color as green or red.
Display
Setting
“Button Green”
The illumrnatron color IS green.
“Button Red”
The rllumrnatron color IS red.
Setting the graphic part display ON/OFF.
Display
Setting
“Graphic ON”
The graphic part is displayed.
“Graphrc OFF”
The graphrc part Isn’t drsplayed.
Adjusting the display contrast.
Display and Setting
“Contrast 0”
“Contrast 5” (Original setting)
“Contrast IO”
Dimming this unit’s display automatically when the vehicle light
switch is turned ON.
Display
Setting
“Drmmer ON”
>Dmer OFF”
The drsplay drms.
The drsplay doesn’t drm.
.-
Setting the time until the faceplate hide operation starts after the
power is turned OFF.
The faceplate can be removed only during the set time period.
Display and Setting
“Off Wait OS”
“Off Wait 3s” (Origrnal settrng)
“Off Wait 25s”
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
- 20 -
Display
“CRSC ON”
“CRSC OFF”
Setting
The CRSC is ON.
The CRSC is OFF.
Strong electrlcal fields (such as from power I~nes) may cause
unstable sound quality when CRSC IS turned ON. In such a srtuatron.
turn It OFF.
Setting the display
Display
“Scroll Auto”
“Scroll MANU”
The text scr
I
@
0 CD text
- MD title
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

Kenwood KDC-5019 User manual

Category
Car media receivers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI