Gamber-Johnson 7110-1343 Installation guide

Brand: Gamber-Johnson

Model: 7110-1343

Category: Input device accessories

Type: Installation guide

This manual is also suitable for

Zirkona to GJ Clevis Adapter Plate

Gamber-Johnson 7110-1343 is a Zirkona Clevis Adaptor Plate designed to give the user a Zirkona option to mount their lightweight device to a clevis and accommodate the use of Gamber-Johnson's quick-release keyboard mount or the keyboard cradle. It was designed to allow for mounting a number of Zirkona components for a customized solution and mounts to most Gamber-Johnson clevises.

7110-1343

Zirkona Clevis Adaptor Plate

Rev A

INST-1001

Printing Spec:

PS-001

This instruction sheet is for the Zirkona Clevis Adaptor Plate. It was designed to give the user

a Zirkona option to mount their lightweight device to a clevis and accommodate the use of

Gamber-Johnson's quick-release keyboard mount (7160-0857) or the keyboard cradle (7160-

1470).

Attachment

The mount is designed

•

to sandwich the top

bracket of the clevis and

QR Keyboard or

Keyboard cradle.

For mounting the QR

•

keyboard use the 1/4-20

x .625 screws found in

the hardware bag.

For mounting the

•

keyboard cradle use the

#8-32 Nyloc nuts that

were provided with the

keyboard cradle.

VESA 75 and the

•

Gamber-Johnson 2 x 4

hole patterns are

provided for mounting

locations.

1/1

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Form

Revision

Product

INSTALLATION INSTRUCTIONS

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.