Page is loading ...
NOTICE
MARQUE :
REFERENCE :
CODIC :
HAIER
LE75B9300U 4K UHD
4293150
PROVISOIREMENT EN ANGLAIS
LE75B9300U
Please read this manual carefully before operating the unit,and keep it for
future reference.
Welcome
Important Information
01 Safety Warnings
2
2
Safety notice
Warning and cautions
3
4
Caution
Base Stand Assembly Instruction
02 Introduction
5
Main Features 5
Main Parameter 5
Installation 5
6
Wall Mounting Installation Guidelines
Front Control Panel
7
8
Rear/Side Sockets
8
Connecting to your Haier TV
Common Interface
9
11
Remote Control
03 Remote Control
12
Teletext
13
Installation Guide
04 Operation
14
Picture menu
Sound menu
Network menu
Lock menu
USB play
Photo
15
15
16
16
17
Setup menu
Channel menu
19
19
Trouble shooting
05 Trouble shooting
20
icationSpecif 23
06 Specification
Music
Movie
Thanks for buying this 75" LED LCD TV.This guide will help you set up and begin using your TV.
IMPOR
TANT INFORMATION
READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.
FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN
THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF
CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.
THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR
SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE
THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT
DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.
Now you can get star
ted!
01 Safety warnings
75" UHD
Digital LED LCD TV
Remote control
AAA battery x2
Instruction Manual
Warranty Card
Screws
Stand
AV adaptor cable
YPbPr adaptor cable
Safety notice
EN-3
CAUTION:When the apparatus was in
electrostatic circumstance, it maybe
malfunction and need to reset by user.
Dim: 515*3 20mm(у ऻᤢ ᓋᓝε
Warning
High voltages are used in the operation of this
television receiver. Do not remove the cabinet
back from your set. Refer servicing to qualied
service personnel.
Warning
To prevent re or electrical shock hazard, do
not expose the television receiver to rain or
moisture.
Warning
Do not drop or push objects into the
television cabinet slots or openings. Never
spill any kind of liquid on the television
receiver.
Caution
Do not block the ventilation holes in the back
cover. Adequate ventilation is essential to
prevent failure of electrical components.
Caution
Do not trap the power supply cord under the
television receiver.
Caution
Never stand on, lean on, or suddenly push the
television or its stand. You should pay special
attention to children. Serious injury may result if
it should fall.
Caution
Do not place your television on an unstable cart,
stand, shelf or table. Serious injury to an
individual , and damage to the television, may
result if it should fall.
Caution
When the television receiver is not used for an
extended period of time, it is advisable to
disconnect the AC power cord from the AC
outlet.
Caution
If the television is to be built into a compartment
or similar enclosure, the minimum distances must
be maintained. Heat build-up can reduce the
service life of your television, and can also be
dangerous.
WARNING AND CAUTIONS
EN-4
Panel
PAL-B/G ,I , D/K
PAL/SECAM/MPEG2/MPEG4/H.265
AC 100
-
240 V 50/60Hz
2x10W
RJ45 x 1
H
nterface (HDMI) x 3
YPbPr x 1
AV x 1
75"
CI x 1
USB x 3
RF x 1
Optical x 1
Composite video input >=350
YPbPr >=400
Headphone x 1
TV System
Video Signal System
Input Power Voltage
Power consumption
Standby Power consumption
Audio Output Power (THD 7%)
Signal Input
Signal output
Horiz
(TV line)
SECAM-B/G , D/K , L
≤0.50W
DVB-T/T2, DVB-C
INSTALLATIONCAUTION
*Locate the TV in the room where light does
not strike the screen directly.
*Total darkness or a r tion on the picture
screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable
viewing.
*Allow enough space between the TV and the
wall to permit ventilation.
*Avoid excessively warm locations to prevent
possible damage to the cabinet or premature
component failure.
*Do not cover the ventilation openings when
using theTV.
Main parameter
Main features
4 NICAM˗
5
T
˗
ime-shift
3
HDMI interface
˗
High luminance, wide viewing
angle˗
2
Used as Television, display terminal
˗
1
Never tamper with any components inside the
TV, or any other adjustment controls not
described in this manual. All LED-TV's are high
voltage electrical equipment.
When you clean dust or any water dr
SCREEN or CABINET or around any of the
buttons or connectors, the power cabled should
be removed from the power socket. Wipe the TV
with a soft, dry, dust free cloth.
During thunderstorms, unplug the power cable
and aerial / antenna cable to prevent damage to
your TV and any other devices connected to it.
All repairs to this TV should only be performed
b
TV service
personnel.
02 Introdution
Introduction
EN-5
99CH(ATV);700CH(DVB-T/T2+DVB-C)Storage channel number
280W
~
Introduction
EN-6
Base Stand Assembly Instruction
1
2
3
(blanket, foam, cloth, etc.) to prevent any
damage to the TV.
Position the TV stand with the curved bracket
facing the front of the TV.
Pls ensure that the legs of the TV stand are pointed outward with and with the longer leg
pointed toward the front of the TV.
Attach the TV stand to the bottom of the TV with the eight MB6 (26mm) black screws.
170
10
67
50
67
50
WALL MOUNTING INSTALLATION GUIDELINES
(75”)
This television can be wall mounted as follows:
Introduction
EN-7
holes on the back of the television.
1
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Please do not attempt to rotate the TV on the stand.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
INSTALLATION NOTES
M8
M8
M8
M8
170
10
67
50
67
50
Introduction
EN-8
Rear/Side Sockets
Remote control sensor.
Indicator LED:
RED: STAND BY.
Key board.
SOURCE
Displa1
3
2
4
5
y the input source menu.
MENU
Display main MENU.
CH+/CH-
In TV mode,press CH+ or CH- to change
the channel up and down.
In MENU, press CH+ or CH- to select items .
POWER
VOL+/VOL-
Adjust sound level.
In MENU,adjust the item that you selected.
Front control panel
3
30 30
≤8m
POWER
input/output
input
RJ45
HDMI 1
input
HDMI 2
input
HDMI 3
input
input
input
RF
1
2
3
4
6
7
9
8
5
12
13
10
OPTICAL
COMMON INTERFACE(CI)
input
AV
analogue audio output
HEADPHONE
YPbPr
digital audio output
input
input
USB
USB
input
USB(3.0)
11
RF
USB
USB
HDMI3
RJ45
OPTICAL OUT
͔ARC͕
Mini AV Mini YPbPr
CI CARD
Introduction
Connecting to your Haier TV
G Green (Y)
B Blue (Pb/Cb)
W White(AUDIO-L )
R Red (AUDIO-R, Pr/Cr
)
Y Yellow (VIDEO)
Amplifier
EN-9
CVBS, DVD Player or other
machine with YPbPr/YCbCr.
G R
B
RY W
CVBS, DVD Player or other
machine with CVBS/S-Video and Audio
Audio/Video machine
with HDMI interfaces
RJ45
OPTICAL OUT
͔ARC͕
RF
USB
USB
HDMI3
Mini AV Mini YPbPr
CI CARD
170
10
67
50
67
50
EN-10
Introduction
Connecting a DVD player / Satellite / cable
set top box receiver / games console / PC or
Laptop
There are several options to connecting a DVD
player / Satellite or Cable set top box receiver /
games console / PC or Laptop to your TV.
Option 1 HDMI
If the device you want to connect to the TV
is switched on, switch off the device first.
Connect a HDMI cable (not supplied) from
the HDMI socket on the TV to the DVD player /
Satellite or cable receiver or games consol.
Switch on the device you have just
connected to the TV
To select the device connected with the
HDMI cable press the SOURCE button on the
re
mote and use the keys to select HDMI and
press the OK button.
Option 2 AV Audio Visual
(Yellow/White/Red)
Make sure that both TV and the device are
switched off before connectin
g.
Connect the AV cables (not supplied) from
the Video (yellow) and Audio (white, red)
sockets on the TV to the DVD player or games
console etc.
To select the device connected with the
cable press the SOURCE button on the
remote and use the keys to select AV and
press the OK button.
Option 3 YPbPr
(Green/Blue/Red)+(White/Red)
Make sure that both TV and the device are
switched off before connecting.
Connect the cables (not supplied) from the
YPbPr IN sockets Y, Pb, Pr (green, blue, red) and
L-Audio-R (white, red) on the TV to the DVD player
or games console etc.
AV
To select the device connected with the
cable press the SOURCE button on the
remote and use theͩ Ʒ keys to select and
pre
ss the OK button.
Option 4 USB
Most USB sticks can be connected to your TV
and some digital cameras may also work.
Connect USB stick (not supplied) or a USB
cable (not s
upplied) to the TV.
To select the USB device connected to the TV,
press the SOURCE button on the remote and
use the keys to select USB and press the
OK button.
Note 2. Apple iPhones and iPods are not
compatible with your TV.
Note 3. When connecti
ng any device to the USB
connection, keep the USB cable length as short
as possible.
Option 5
Option 6
YPbPr
YPbPr
Note1:Only *.jpg , *.mp3 , *.txt , *.avi ,*.mp4 , files will
work, other file types are not guaranteed and may not.
HEADPHONE OUTPUT
is a digital audio connection used to
connect audio equipment, for example home
theatres and other digi
tal HiFi systems over
short distances. The signal is transmitted over
either a coaxial cable with RCA connectors.
Make sure that both TV and the device are
switched off before connecting.
Connect the AV cables (not supplied) from
the
socket on the TV to the Home Theater
sound system or digital HiFi system etc.
Insert the plug of the earphone into the headphone
socket on the TV. The TV speakers are now muted.
Alternatively you can also plug in external speakers if
required.
DIGITAL AUDIO OUT(OPTICAL )
OPTICALL
Connecting to your Haier TV
OPTICAL
EN-11
The common interface (CI) slot is designed to
accept the conditional Access (CA) Module and
Smart card in order to view the pay TV
programmes and additional services.
Contact your Common Interface service provider
to get more information about the modules and
subscription.
Please noted that CA modules and smart cards
are neither supplied nor optional accessories
from us.
COMMON INTERFACE
Introduction
Press to turn the TV on or .
(Power)
S.MODE
Press to select the sound mode.
P.MODE
Press to select the picture mode.
0-9
Press to enter a channel number
or password.
Q.VIEW
Press to switch to the last viewed
channel.
SLEEP
Press to set the sleep timer.
VOL +/-
Press to adjust the volume level.
(Mute)
Press to turn the sound on or
.
AUDIO(I/II)
Press to select Mono,Nicam stereo
for ATV channel.Select Audio
language for DTV channel.
SUBTITLE
Press to turn the subtitle on or o
.
Press to open a favorite channel
list.In teletext mode,press to
hold a page.
03 Remote Control
Remote Control
EN-12
SCREEN
Press to change picture aspect ratio.
Press to open the on-screen menu.In teletext
mode,press to open the INDEX page.
Press to navigate the on-screen menu.
Press to c m a selection.OK
Press to return to the previous screen.In teletext
mode,press to enter mix mode.
(reverse)
(forward)
Press to fast forward or reverse
playbadk in multimedia mode.
In teletext mode,press to open or close teletext page.
Press to display main menu in the MHL mode,for
example the APP menu.
SOURCE Press to open the input source list.
P Press to change the channel.
Press to display the channel information.
In teletext mode,press to revealthe hidden
information.
Press to open the channel list.In teletext mode,
press to switch the image to top,bottom or full.
Press to open the YouTube.
Press to close the on-screen menu.In teletext
mode,press to hide the text.
16
17
18
19
20
21
22
23
24
25
26
Press to select previous or next e.
(previous)
(next)
Press to stop multimedia playback.
GUIDE
Press to display electronic programme guide
in TV mode. Press to enter the teletext subpage.
(REC)
Press to record the TV program you are watching
in DTV mode.
Press to play/pause in multimedia mode,
(play/pause)
Insert Batteries into the Remote Contol
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the polarity
(+ or -) of the batteries matches the polarity marks inside the unit.
3. Mount the battery cover. Replace with new batteries when the
TV set begins to show the following symptoms:Operation is
unsteady or erratic. Sometimes the TV set does not function
with Remote Control Unit.
Remark:
1) Alkaline Battery Recommeded.
2) Remove batteries when they are exhausted or if the remote
control is not to be used for
long time.
Press to open the home mode.
Time Shift in DTV mode.
E
TEXT
SELECTING A PAGE
DIRECT ACCESS
TO THE ITEMS
SUB CGUIDE/ ODE
HOLDFAV/
REVEALINFO/
?
Press:
You will obtain :
TELETEXT
Enter the number of the page required using the 0 to 9 up/down. Example:
page 120, enter 120. The number is displayed top left, the counter turns and
then the page is displayed. Repeat this operation to view another page. If
the counter continues to search, this means that the page is not
transmitted. Select another number.
Coloured are as are displayed at the bottom of the screen. The 4 coloured
keys are used to access the items or corresponding pages. The coloured
areas flash when the item or the page is not yet available.
This returns to the contents page (usually page 100).
Press the bu
tton and enter the 4-digit number to enter a secondary page.
To freeze the page.
To display or hide the concealed information (games solutions).
This is used to call or exit teletext modes. The summary appears with a list
of items that can be accessed. Each item has a corresponding 3 digit page
number.
Teletext is an information system broadcast by certain channels which can be consulted like
a newspaper. It also offers access to subtitles for viewers with hearing problems or who are
not familiar with the transmission language(cable networks, satellite channels, etc.)
Remote Control
EN-13
MIXBACK/
This will superimpose the teletext data on top of the TV picture. Press
button again to return to full text.
EXITEXIT/
Hide the teletext.
SIZECH.LIST/
Switch the image to top,bottom.
INDEX
Operation
04 OPERATION
First Time Installation
EN-14
please according to the Text Tip to First Time Setup.
Home:
ᇻ O
MEᇼ menu.
ᇻ ᇼᇻ ᇼǏ ǐ/Ǐ ǐ
Press H button to enter the HOME
Press Ż Ź button to select
sources and application
Press
to select .
.
APPLICATIONS
TV SETTINGS
Press to enter setting.
P
ress MENU button to display the main menu.
Press Ż Ź button to
select what you want set.
ᇻ ᇼᇻ ᇼǏ ǐ/Ǐ ǐ
OK
OK
Remarque: Définissez le mot de passe initial de votre
téléviseur.
Si le pays sélectionné est la France, le
Le mot de passe ne peut pas être défini comme 0000.
Operation
EN-15
Sound
P
ress MENU button to display the main menu.Press Ż Ź
button to select SOUND in the main menu,
Ǐ ǐǏ ǐ
PressǏMENUǐto enter the main menuͫpress
Ǐ ǐǏ ǐto select picture menu 澞Ż Ź
P
icture
1. :
2. Ż Ź
Pr
essᇻ ᇼᇻ ᇼto select
PressǏ ǐǏ ǐto adjust or select.
Picture Mode/ContrastBrightness/Colour/
Tint/Sharpness/ CBacklight/ olor Temperature/ Aspect Ratio/Noise Reduction.
ᇻ ᇼᇻ ᇼ Ǐ ǐǏ ǐ
ptional Economy
Note Press to .
Users
Economy
Press
button to select Picture Mode, then press Ż Ź
button to select.
(O : vivid stander mild user ).
: PMODE select Picture Mode quickly
Vivid
Standard The default mode, to make users experience high-quality images
u nder normal light.
Mil
d I
mage colors more gen
tle to protect eyes.
U
ser-defined picture settings
Reduce screen brightness, improved contrast for energy saving.
This mode enhance contrast and sharpness to make picture mor
e
vivid.
Picture Mode
Contrast/ Brightness/Colour/Sharpness
Colour Temp
Colour Temperature
Adjust the overall color of the image.
ᇻ ᇼᇻ ᇼ .
Ǐ ǐǏ ǐ
ptional
Press to select press
Ż Ź to select.
(O :Cool, Normal , Warm).
Coo
l P
roduces a gentle blue-hued image.
Normal Produces a vivid image.
War
m P
roduces a red-hued image.
P ,and press Ż Ź
Adjust imag
e color density
Adjust the image edge sharpness
ressᇻ
ᇼᇻ ᇼto select Ǐ ǐǏ ǐto adjust
Contrast A
djust image contrast.
Brightness Adjust image brightness.
Colour
Sharpness
Aspect Ratio
Aspect Ratio
Zoom Zoom
Press to select , press Ż Ź to select.
(O :Standard ).
ᇻ ᇼᇻ ᇼ Ǐ ǐǏ ǐ
ptional ,16:9,4:3, 1, 2
Noise Reduction
Setting the option to eliminate image noise intensity.
ressᇻ ᇼᇻ ᇼto select Noise Reduction
Ǐ ǐǏ ǐto select on/off.
P , and press
Ż Ź
Color Temp Normal
Operation
EN-16
Digital Output
ŻŹPress ͌͊ button to select digital output,then press to select.
(Options:PCM, Auto)
Audio Description
Audio Description
AD Volume
AD Volume
Press button to select , then press
Ż Ź button to choose ON/OFF.
Press button to select , then press Ż Ź
button to adjust.
ᇻ ᇼᇻ ᇼ
Ǐ ǐǏ ǐ
ᇻ ᇼᇻ ᇼ Ǐ ǐǏ ǐ
Audio Enhancement
ᇻ ᇼᇻ ᇼ
Ǐ ǐǏ ǐ
Press button to select , then press
Ż Ź button to choose off/Surround/dbx-tv
dbx-tvdbx-tv
.
When you select dbx-tv , the following options will show up dbx-tv
Total Sonic/ Total Volume/ Total Surround.
Audio Enhancement
Network Menu
Pres
utton to select Network in the main menu.
Press button to select
ᇻ ᇼᇻ ᇼ :Network Configuration/IP Config
N etwork info
etwork test
Network Configuration
/ŻŹ
Select Wifi or Cable network.
Press͌͊ button to select Network Configuration,
then press button to confirm.
IP/Wifi Configuration
Network Info
Network test
Wifi Auto Search
Sound Mode
Press button to select Sound Mode, then press Ż Ź
button to select. (O : Music/Movie/Night /Users ).
N : SMODE select Sound Mode quickly
ᇻ ᇼᇻ ᇼ Ǐ ǐǏ ǐ
ptional Standard/
ote Press to .
Pressᇻ ᇼᇻ ᇼto select:
Ǐ ǐǏ ǐ
Press Ż Ź to select or adjust.
Sound Mode/Treble/Bass/Balance
/Auto
Volume
Level/Surround/
Digital Output/Audio Description/AD Volume
Standard Produces a balanced sound in all environments.
Music Preserves the original sound.Good for musical programs.
Movie Enhances treble and bass for a rich sound experience.
Users Select to customize sound settings.
Night Enhances vocals for sports.
Balance
Adjust the left and right channel output balance.
Balance
Auto Volume Level
Auto Volume Level
Press button to select , then press Ż Ź
button to adjust.
Press button to select , then press
Ż Ź
button to choose ON/OFF.
When “ON” is selected, the volume will attempt to stay at a constant.
ᇻ ᇼᇻ ᇼ Ǐ ǐǏ ǐ
ᇻ ᇼᇻ ᇼ
Ǐ ǐǏ ǐ
OK OK
SETUP
Press button to select
Press Ż Ź to set.
ᇻ ᇼᇻ ᇼ
Ǐ ǐǏ ǐ
:Language /Audio Language/Subtitle
Language /Hearing Impaired /Blue Screen/PVR File System/First Time
Installation/Software Update(USB)/Software Update(NET)/ Reset TV
/HDMI CEC /HDMI Port Setting/HbbTV/Usage Mode.
Operation
EN-17
Language
Press ͩ / Ʒ button to select Language. Press ŻŹ to select the display
language.
Audio Language
Press ͩ / Ʒ button to select Audio Language. Press ŻŹ to select the
Audio language.
Subtitle Language
Press ͩ / Ʒ button to select Subtitle Language. Press ŻŹ to select the
Subtitle language.
Hearing Impaired
Press ͩ / Ʒ button to select Hearing Impaired. Press ŻŹ to select it on or
off.
PVR File System
Recording the selected program.
Press͌͊ button to PVR, then press b utton to confirm
.
Blue Screen
Press ͩ / Ʒ button to select Blue Screen. Press ŻŹ to select it on or off.
First Time Installation
Press ͩ / Ʒ button to select First Time Installation,
then press button to enter sub-menu.
Details can be found in page1.
Usage Mode
Software Update(USB)
Reset TV
HDMI CEC
You can select Home Mode or Shop Mode.
When in Shop Mode,the following label will show up.
HDMI PORT SETTING
HbbTV
You can select ON/OFF for HbbTV..
Channel
Press button to select
Press Ż Ź to enter
ᇻ ᇼᇻ ᇼ
Ǐ ǐǏ ǐ
: DVB Antenna/Auto Scan/Analogue Manual
Scan/Digital Manual Scan /Channel List/Signal Information.
OK
OK
OK
Note:when you choose HDMI 2.0 full, this HDMI can receive 2160p @60Hz 4:4:4;
when you choose HDMI 2.0 light ,this HDMI can receive 2160p@60Hz 4:2:0 and
the below.
Please refer to the real TV specific picture
Auto Tuning
Digital Manual Tuning
Analogue Manual Tuning
Operation
EN-18
Channel List
Signal Information
Channel list
Schedule List
Time
Press button to select
Press Ż Ź to set.
ᇻ ᇼᇻ ᇼ
Ǐ ǐǏ ǐ
:Off Time/On Time/Sleep Timer/OSD
Timer/Auto Standby/Time Zone.
Sleep Timer
Sleep Timer,
ᇻ ᇼᇻ ᇼ Ǐ ǐǏ ǐ
ptional off, , , ,
Press button to select Press Ż Ź to select.
(O : 10min 20min 30min 60min,90min,120min,180min ,240min ).
OSD Timer
OSD Timer,
ᇻ ᇼᇻ ᇼ Ǐ ǐǏ ǐ
ptional Aways , , , s
Press button to select Press Ż Ź to select.
(O : 5s 15s 30s 60 ).
Auto Standby
Auto Standby,
ᇻ ᇼᇻ ᇼ Ǐ ǐǏ ǐ
ptional
Press
button to select Press Ż Ź to select.
(O : ).Off, 3H, 4H, 5H
Time Zone
Time Zone,
ᇻ ᇼᇻ ᇼ Ǐ ǐǏ ǐPress button to select Press Ż Ź to select.
Off Time
On Time
LOCK
Press button to select
Press Ż Ź to set.
ᇻ ᇼᇻ ᇼ
Ǐ ǐǏ ǐ
:System/Hotel Lock/Set Password/Channel
Lock/Parental Guidance
Set Password
/