DFI EC520/EC521-HD User manual

Category
Drive bay panels
Type
User manual
1
EC510/511/520/521-HD Installation Guide
DFI reserves the right to change the specications at any time prior to the product's release. For the latest revision and for more details
of the installation process, please refer to the user's manual on the website.
www.d.com
Note:
The CD that came with the system contains an autorun screen to install drivers, utilities, and software
applications required to enhance the performance of the system and a user's manual for your reference.
Insert the CD into a CD-ROM drive. The autorun screen will appear. If after inserting the CD, “Autorun”
did not automatically start, please go directly to the root directory of the CD and double-click “Setup”.
Please install all required drivers.
Package Contents
1 system unit
1 CD disk includes:
- Drivers / Manual
2
Installing a 2.5" SATA Drive
Mounting screws
1. The SATA drive bay is located on the system board.
2. Use the 4 provided mounting screws to secure the protective plate in place
on the system board.
Protective plate
SATA drive bay
3
Mounting screw
HDD bracket
Mounting screws
SATA drive
3. Insert the SATA drive into the HDD bracket and secure it in place with the
provided mounting screws.
Protective plate
4
4. Connect one end of the SATA data cable and the SATA power cable to a SATA
data connector and a SATA power connector on the SATA drive respectively.
SATA power connector
SATA data
connector
SATA power cable
SATA data cable
SATA power cable
SATA data cable
5
5. Place the SATA drive with the HDD bracket into the system. Align the mounting
holes on the HDD bracket with the mounting holes on the protective plate and
then use the provided mounting screws to secure the drive in place.
Mounting Screw
6. Connect the other end of the SATA data cable and the SATA power cable
to a SATA data connector and a SATA power connector on the system board
respectively.
SATA power connector
SATA data connector
SATA power connector
SATA data connector
SATA data
connector
SATA power
connector
6
Board Layout and Jumper Settings
934-EC5100-0B0G
A37912551
www.d.com
Clear CMOS Data JP4
Normal (default) 1-2 On
Clear CMOS Data 2-3 On
USB Power Select: 1-2 (JP1), 8-9 (JP2)
+5V (default) 1-2 On
+5V_standby 2-3 On
PS/2 Keyboard/Mouse Power Select JP3
+5V (default) 1-2 On
+5V_standby 2-3 On
RS232/422/485 Select: COM 1 (JP8/JP11)
COM 2 (JP12/JP15)
RS232 (default) 1-3, 2-4 On
RS422 Full Duplex/RS485 3-5, 4-6 On
RS232/422/485 Select: COM 1 (JP13), COM 2 (JP17)
RS232 (default) 1-2 On
RS422 Full Duplex 3-4 On
RS485 5-6 On
RS232/Power Select: COM 1 (JP14), COM 2 (JP18)
RS232 (default) 1-3 (RI), 2-4 (DCD) On
RS232 with power 3-5 (+5V), 4-6 (+12V) On
Auto Power-on Select JP7
Power-on via Power Button (default) 1-2 On
Power-on via AC Power 2-3 On
Mini PCIe Signal Select JP9
PCIe (default)
1-4-7-10
2-5-8-11 On
mSATA
2-5-8-11
3-6-9-12 On
Mini PCIe Power Select JP6
+3.3V 1-2 On
+3.3V_standby (default) 2-3 On
Note:
1. When COM 1 RS232/422/485 is selected, JP8 and JP11 must be set in
accordance to JP13.
2. When COM 2 RS232/422/485 is selected, JP12 and JP15 must be set in
accordance to JP17.
1
SATA 0
1
SATA 1
1 2
11 12
Front
Panel
Buzzer
VGA
USB 1-2
USB 3.0
(JP15) (JP12)
USB 1-2
Power
Select
(JP1)
(JP13)
(JP14)
(JP8) (JP11)
ME Disable
USB 8-9
USB 8-9
Power
Select
(JP2)
Status LED
HDD LED
1
System
Fan
1
DDR3_2 SODIMM
DDR3_1 SODIMM
Reset
1
1
11
1
+12V
Power
1
24
3
Mini PCIe
Battery
1
12
2
11
Debug
Port
1
1
4
SATA Power 1
1
4
SATA Power 0
+ -
DC-in
COM 1
LAN 1
LAN 2
PCIe x16
1
1012
3 1
SPI Flash
BIOS
1
2 6
5 1
2 6
5 1
2 6
5
1
2 6
5
Power
Button
1
2 10
9
1
2 10
9
1
2 10
9
1
2 10
9
1
2 10
9
COM 2
COM 3
COM 4
COM 5
COM 6
1
2
5
6
SMBus
1
2
5
6
1
2
5
6
1
2
5
6
1
2
5
6
(JP17) (JP18)
Mini PCIe
Power Select
(JP6)
Clear CMOS
Data (JP4)
PS/2 KB/MS
Power Select
(JP3)
Mini PCIe Signal
Select (JP9)
Auto Power-on
Select (JP7)
COM 1 RS232/422/485 Select
COM 1 RS232/Power Select
(JP8)
(JP11)
(JP13)
(JP14)
COM 2 RS232/422/485 Select
COM 2 RS232/Power Select
(JP12)
(JP15)
(JP17)
(JP18)
PCIe x4
2
25
26
Parallel
1
PS/2 KB/MS
2
1
10
9
EXC
Chassis
Intrusion
Standby
Power
LED
+3.3V Power
LED
SATA 3.0
SATA 3.0
USB 2.0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

DFI EC520/EC521-HD User manual

Category
Drive bay panels
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI