Creative Solutions for the Digital Life
™
We'll review the easy steps on how to change your wireless network
name and/or password for your Q1000 Qwest Wireless N VDSL
Modem Router,manufactured by Actiontec Electronics,Inc.
The instructions below are for the Q1000 Qwest Wireless N
VDSL Modem Router with QAQ01-31.00L.29 firmware.
Things You’ll Need
•
Q1000 Qwest Wireless N VDSL Modem Router
•
Computer connected to the Modem
Step
1
On any computer that is
connected to the Internet, type http://192.168.0.1 in the web
browser window and then press Enter.
Step
2
Click Wireless Setup.
Step
3
The Basic Settings screen appears.To
change the name of your wireless
network,go to "#2.Change the network
name (optional)".Enter the name or
code that you want.Click Apply.
Step
4
To change the wireless password or WPA
Key,select WPA or WPA2 from the menu
on the left.
Step
5
Go to "5.Select a security key type or
select Enterprise Network to use 802.1x".
Then click the button next to“Use
Custom Key/Passphrase.”
Step
6
Now enter a new password or passphrase.
Step
7
Write down your new wireless network
name and password.Then click Apply.
Congratulations! You have successfully changed the wireless
name and/or wireless password for your Q1000 Qwest Wireless N
VDSL Modem Router.
How to
Change your wireless network
name & password on the
Q1000 Qwest Wireless N
VDSL Modem Router
Q1000 Qwest
Wireless N VDSL Modem
Router from Actiontec
© 2009 Actiontec Electronics,Inc.
Actiontec,Actiontec Installation Buddy,Creative Solutions for the Digital Life,and the Actiontec
logo are registered trademarks or trademarks of Actiontec Electronics,Inc.Incorporated in
the U.S.or other countries.All other names are properties of their respective owners.
Product photo may differ from actual product,however functionality remains as stated above.
Specifications are subject to change without notice.
HT1063/0609