Specifications
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
CRITICAL DIMENSIONS
(DO NOT SCALE)
®
DESCRIPTION
• Metal construction with a chrome plated, decorative
glacier, LifeShine
®
polished brass, Platinum, Black
Opal
™
, Classic Gold, or Satine
™
finish
• Includes adjustable showerhead, arm, and flange
OPERATION
• Lever style handle with temperature indicator on the
escutcheon, pull-on/push-off operation
• Temperature operates through an 180° arc of handle
travel (full cold to full hot)
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all applicable requirements
referenced therein and complies with the applicable
requirements of ANSI A117.1
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
MONTICELLO
®
INSPIRATIONS
™
MOENTROL
®
Single-Handle Pressure Balancing Tub/Shower
(Trim Only)
Models: T3125, T3125CP,
T3125P, T3125W,
(Bulk packed 12 per carton)
RT3125PM/AT2199PM,
RT3125BP/AT2199BP, RT3125CG/AT2199CG,
RT3125ST/AT2199ST
(Packed 1 per carton)
T3124, T3124CP, T3124P, T3124W, 82221
(Packed 1 per carton)
NOTE: See reverse side for illustrated
parts and optional handle inserts
7" (178mm)
ESCUTCHEON
DIAMETER
HOT
INLET
COLD
INLET
FINISHED WALL LINE
LEVER HANDLE
(Handle inserts
not furnished)
5-1/2" (140mm)
WALL OPENING
ESCUTCHEON
H/A/F
FLOOR
1-15/16"(49mm) MIN.
2-9/16" (65mm) MAX.
1-1/4" (32mm)
1" (25mm)
L
C
45" (1143mm)/
48" (1219mm)- SHOWER
32" (813MM) - TUB OR
TUB SHOWER
6'-6"
(1981mm)
7-1/2"
(191mm)
MIN.
TUB RIM
ADA symbol applies to shower
valve control only.
ADA
Rev. 4/01
-
1
