Hasbro 87377 User manual

Category
Toy vehicles
Type
User manual

This manual is also suitable for

Hasbro 87377 is a motorized product that requires batteries to operate. It comes with various battery options, including AA, AAA, A76, LR44, AG3, and LR41 batteries. The device requires a Phillips/cross head screwdriver to insert or replace batteries. It is important to insert batteries correctly, matching the + and – polarity markings, and to avoid mixing old and new batteries or different battery types.

Hasbro 87377 may cause or be affected by local electrical interference. If this occurs, move the device away from other electrical equipment and reset it by switching it off and back on again or removing and re-inserting the batteries.

Hasbro 87377 is a motorized product that requires batteries to operate. It comes with various battery options, including AA, AAA, A76, LR44, AG3, and LR41 batteries. The device requires a Phillips/cross head screwdriver to insert or replace batteries. It is important to insert batteries correctly, matching the + and – polarity markings, and to avoid mixing old and new batteries or different battery types.

Hasbro 87377 may cause or be affected by local electrical interference. If this occurs, move the device away from other electrical equipment and reset it by switching it off and back on again or removing and re-inserting the batteries.

FCC STATEMENT:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
Some poses may require additional support.
Product and colors may vary.
© 2006 Lucasfilm Ltd. & ® or TM where indicated. All rights reserved.
®* and/or TM* & © 2007 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks
Package U.S. Patent Pending
*
AGES 3
+
87377/87386 Asst.
PN: 6688860000
Battery Symbols
Battery Statements
updated 11.7.05
AAA AA C D 9.5V
CR2032
A76/LR44
BATTERIES
INCLUDED
Replace with 3 x 3.0V
“CR2032lithium
batteries. Phillips/cross
head screwdriver (not
included) needed to
replace batteries.
x3
CR2032 Lithium
BATTERIES INCLUDED
Replace with 3 x 3.0V “CR2032” lithium batteries.
Phillips/cross head screwdriver (not included)
needed to replace batteries.
x3
CR2032 Lithium
BATTERIES INCLUDED
Replace with 3 x 3.0V “CR2032” lithium batteries. Phillips/cross
head screwdriver (not included) needed to replace batteries.
x3
CR2032 Lithium
PRODUCTS THAT DO NOT INCLUDE BATTERIES:
Products that do NOT include but require AAA, AA, C, D, 9V
batteries should declare that alkaline ("LR") type batteries
are recommended.
Motorized products that do NOT include but require AAA, AA, C,
D, batteries should declare that alkaline ("LR") type batteries
are required.
PRODUCTS THAT INCLUDE BATTERIES:
Products that include AAA, AA, C, D, 9V batteries should declare
that batteries are included and recommend replacement with
alkaline batteries.
PRODUCTS THAT INCLUDE BUTTON CELLS:
Products that include CR2032 or CR2016 button cell batteries
should have the following battery statement:
Motorized products that include AAA, AA, C, D, 9V batteries should
declare that batteries are included and replacement with alkaline
batteries is required.
Products that include A76/LR44 button cell batteries should have
the following battery statement:
BATTERIES
INCLUDED
Replace with 3 x 1.5V
A76” or LR44 size
alkaline batteries.
Phillips/cross head
screwdriver (not
included) needed to
replace batteries.
x3
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 3 x 1.5V A76” or LR44 size alkaline batteries.
Phillips/cross head screwdriver (not included) needed to
replace batteries.
x3
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 2 x 1.5V A76” or LR44 size alkaline batteries.
Phillips/cross head screwdriver (not included) needed to replace batteries.
x2
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 3 x 1.5V A76” or LR44 size alkaline
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x3
CR2032 Lithium
BATTERIES INCLUDED
Replace with 6 x 1.5V A76” or LR44 size alkaline
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x6
CR2032 Lithium
BATTERIES INCLUDED
BATTERIES
REQUIRED
x3
1.5V AAA
R03 size
Alkaline batteries
recommended.
Phillips/cross head
screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
BATTERIES REQUIRED
1.5V AAA/R03 size
Alkaline batteries recommended.Phillips/cross
head screwdriver (not included) needed to
insert batteries.
NOT INCLUDED
x3
BATTERIES REQUIRED
1.5V AA/R6 size
Alkaline batteries recommended.Phillips/cross
head screwdriver (not included) needed to
insert batteries.
NOT INCLUDED
BATTERIES REQUIRED
x3
1.5V AAA/R03 size
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
NOT INCLUDED
BATTERIES
REQUIRED
x3
1.5V AAA
R03 size
Alkaline batteries
recommended.
Phillips/cross head
screwdriver
(not included)
needed to insert
batteries.
NOT INCLUDED
BATTERIES
INCLUDED
x3
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAA
or R03 size batteries.
Alkaline batteries recommended.
Phillips/cross head screwdriver
(not included) needed to
insert batteries.
x3
BATTERIES INCLUDED
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAA” or R03 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to replace batteries.
x2
BATTERIES INCLUDED
1.5V AA/R6 size
Replace with 2 x 1.5V “AA” or R6 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
BATTERIES INCLUDED
x3
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAA” or R03 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
BATTERIES
INCLUDED
x3
1.5V AAA
R03 size
Replace with 3 x
1.5V “AAA” or R03
size batteries.
Alkaline batteries
recommended.
Phillips/cross head
screwdriver
(not included) needed
to insert batteries.
BATTERIES
ALKALINE
REQUIRED
x3
1.5V AAA
LR03 size
Phillips/cross head
screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
BATTERIES
ALKALINE
REQUIRED
1.5V AAA/LR03 size
Phillips/cross head screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
1.5V AAA/LR03 size
Phillips/cross head screwdriver (not included) needed
to insert batteries.
NOT INCLUDED
ALKALINE BATTERIES REQUIRED
x3
1.5V AAA
LR03 size
Phillips/cross head
screwdriver
(not included)
needed to insert
batteries.
BATTERIES
ALKALINE
REQUIRED
NOT INCLUDED
BATTERIES
INCLUDED
x3
Replace with 3 x 1.5V “AAA
or LR03 size alkaline batteries .
Phillips/cross head screwdriver
(not included) needed to insert
batteries.
BATTERIES
INCLUDED
x4
Replace with 4 x 1.5V “AA”
or LR6 size alkaline batteries .
Phillips/cross head screwdriver
(not included) needed to insert
batteries.
x3
BATTERIES INCLUDED
Replace with 3 x 1.5V “AAA” or LR0.3 size alkaline
batteries . Phillips/cross head screwdriver (not included)
needed to insert batteries.
BATTERIES INCLUDED
x3
Replace with 3 x 1.5V “AAA” or LR03 size alkaline batteries . Phillips/cross head screwdriver
(not included) needed to insert batteries.
BATTERIES
INCLUDED
x3
Replace with 3 x 1.5V
“AAA” or LR03 size
alkaline batteries .
Phillips/cross head
screwdriver (not
included) needed to
insert batteries.
x2
BATTERIES INCLUDED
1.5V AA/R6 size
Replace with 2 x 1.5V “AA” or LR6 size alkaline
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x2
BATTERIES
ALKALINE
REQUIRED
1.5V AA/LR6 size
Phillips/cross head screwdriver (not
included) needed to insert batteries.
NOT INCLUDED
BATTERIES REQUIRED
1.5V AAA/R03 size
Alkaline batteries recommended.
Phillips/cross head screwdriver (not
included) needed to insert batteries.
NOT INCLUDED
x2
Replace with 2 x 1.5V A76” or LR44 button cell
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x2
A76/LR44 Alkaline
BATTERIES INCLUDED
BATTERIES INCLUDED
Replace with 2 x 1.5V AG3” or LR41 button cell
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x2
AG3/LR41 Button Cell
BATTERIES INCLUDED
x3
BATTERIES
ALKALINE
REQUIRED
1.5V AA/LR6 size
Phillips/cross head screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x6
BATTERIES REQUIRED
1.5V AAA/R03 size
Alkaline batteries recommended.Phillips/cross
head screwdriver (not included) needed to
insert batteries.
NOT INCLUDED
x3
BATTERIES INCLUDED
1.5V AA/R6 size
Replace with 3 x 1.5V “AA” or R6 size batteries.
Alkaline batteries recommended. Phillips/cross
head screwdriver (not included) needed to
replace batteries.
CAUTION:
1. Be sure to insert the batteries correctly and always follow the
toy and battery manufacturers’ instructions.
2.
Do not mix old batteries and new batteries or alkaline, standard
(carbon zinc) or rechargeable (nickel-cadmium) batteries.
3. Always remove weak or dead batteries from the product.
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference.
Batteries should be replaced by an adult.
1. Always follow the instructions carefully. Use only batteries specified and be sure to insert item correctly by
matching the + and – polarity markings.
2. Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.
3. Remove exhausted or dead batteries from the product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short-circuit the supply terminals.
6. Should this product cause, or be affected by, local electrical interference, move it away from other electrical
equipment. Reset (switching off and back on again or removing and re-inserting batteries) if necessary.
7.
RECHARGEABLE BATTERIES: Do not mix these with any other types of batteries. Always remove from the product
before recharging. Recharge batteries under adult supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.
CAUTION:
To replace batteries: Using a Phillips/cross head screwdriver
(not included), loosen screw in battery compartment door
(screw remains attached to door). Remove door. Insert 3 x 1.5V
“AA” or R6 size batteries. Alkaline batteries recommended.
Replace door and tighten screw.
CANTINA BAND
  • Page 1 1

Hasbro 87377 User manual

Category
Toy vehicles
Type
User manual
This manual is also suitable for

Hasbro 87377 is a motorized product that requires batteries to operate. It comes with various battery options, including AA, AAA, A76, LR44, AG3, and LR41 batteries. The device requires a Phillips/cross head screwdriver to insert or replace batteries. It is important to insert batteries correctly, matching the + and – polarity markings, and to avoid mixing old and new batteries or different battery types.

Hasbro 87377 may cause or be affected by local electrical interference. If this occurs, move the device away from other electrical equipment and reset it by switching it off and back on again or removing and re-inserting the batteries.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI