2. Dongguan Xing Yue Electronic
  3. EB07
EB07

Dongguan Xing Yue Electronic EB07 User guide

  • Hello! I have analyzed the provided user manual for the TWS Earbuds. This document covers essential information on Bluetooth pairing, music playback controls, voice assistant activation, and charging procedures. Feel free to ask any specific questions about using your new earbuds, such as pairing, controlling music or charging options. I will provide details based on the manual's content.
  • How do I pair the earbuds with my device?
    How do I control music playback?
    How do I activate voice assistant?
    How long does the battery last?
FCC ID:2ALCFEB07
How to use the earbuds:
1. Bluetooth pairing:
Remove earbuds from case, prompt a voice "Power on", then a beep to indicate both
earbuds sync to each other, now main earbud LED flash Red& Blue, secondary earbud flash
Blue slowly. Turn on the Bluetooth function on mobile device, Select "TWS Earbuds" pairing
name.After connect Bluetooth, prompt a voice "connected".now both earbuds LEDs flash
blue slowly.Disconnect Bluetooth will prompt a voice "Disconnected". Long press earbuds
button about 5 seconds to power off earbuds and hear a voice prompt "Power off".
If disconnect Bluetooth after 5 mins, the earbuds will auto shut off.
2. Playing Music
Play/Pause/Answer call/Hang up – One tap/touch/click on button
Next track – Double tap/touch/click on button, Right Earbuds
Previous track – Double tap/touch/click on button, Left Earbud
Activate voice assistant – Long press on button 2 seconds, both earbuds
Reject call – Long press on button 2 seconds when calling.
long press the button 5 seconds to turn off , long press 3 seconds to turn on.
3. Charging the earbuds
When case has power, put one earbud into case this earbud will auto start charging until earbuds
fully charged, the other earbud will remains on. Put both earbuds into case, earbuds will turn off
and start auto charging until earbuds fully charged.
Earbuds playback time at max volume: about 4hours.
Charging case charge the earbuds: Solid Red LED on earbuds when charging and solid Blue on
case, LEDs on both earbuds and on case all turn off when earbuds are fully charged.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interferenceto radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
· Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.
/