RF GasBolier
Programmable Therm
BOT-R315
ostat
Specification
•LCD Size: Diameter 55mm
•
•
•
•
•
•
•
•
•
•
•
Power Supply: R315 3V DC （2 x AAA 1.5 V）
Accuracy/Tolerance : +/ -
RCV31522V ac, 50/60Hz
Current Load:10A (Resistive)
Ambient Temp. Range: 0~99.5 ℃
Setpoint Range: 5~35 ℃
0.5℃
Timing Tolerance : <1%
Thermistor : 10KΩ@25 ℃
Storage Conditions Temp.: -10~60 ℃
Humidity:< 90% r.h.
Battery Life: 6 months
RF Module: Single Way Module
Frequency: 433 Hz(defaulted
Display & Buttons
1.Week day: from Monday to Sunday
2. Programmable Time Zone
3. Room Temperature
4. Buons Lock
5. Setpoint,or Floor Temperature(It displays when
external sensor acvated)
6. Time of day(00:00..23:59)
7. Heang is on
8. Automac Programmable Mode: 7 days, 6 me zones
9. Comfort Mode
10. Energy Saving Mode
11. Holiday Mode
12. Baeries Comsumpon Indicator
14.Manual Mode(overriden)
•15. Working Modes selecting .
1)Press shortly to select Comfort Mode, Energy
Saving Mod, Holiday Mode, Automatic Mode, and Manual
Mode(Overridden Mode)
2) Synchronizing Clock
Press button to switch off thermostat, and then press
hol
and hold Mbutton for 3 secs,adjust clock from Minute,
Second and Weekday via .
3) There are 4 Time Zones in total, user is able to customize
Time Zones from 1 to 4 according to their demand. Press and
d buon for 3 seconds , it will display 4 and Monday,
adjust the numbers(1 to 4) of Time Zones via . Press
Period and relave Setpoint. Sequence is from Hour (1 st me
zone), Minute(1st me zone) and Setpoint(1 st me zone)
shortly to enter into Automac Mode Sengs of each Time
to
Hour (4 thme zone), Minute(4th me zone) and Setpoint(4
th
me zone).
Aer Sengs of Monday is done, press shortly and
switchover from Tuesday to Sunday, follow the same seng
steps as above.
Daily Setting
1st Time Zone
Hour Minute Setpoint
……
4th Time Zone
Hour Minute Setpoint
Decreasing or Increasing value by 10 mins via
buttons.
Mon. Tue. Wed. Thur. Fri. Sat. Sun.
