2. KODLin
  3. K73242

KODLin K73242 User manual

  • Hello! I've reviewed the installation instructions for the Kodlin Trackboard Shifter Peg K73240 and Brake Pad K73242. I understand the steps involved in removing the old parts, attaching new ones with thread locker, and applying the correct torque. I'm ready to answer any questions you might have about installing these parts.
  • What should I do before installing the shifter peg?
    What torque should I tighten the shifter peg to?
    What should I do before installing the brake pad?
    What torque should I tighten the brake pad to?
Installation Instructions
for Kodlin Trackboard Shifter Peg K73240 and Brake Pad K73242
Trackboard Shifter Peg K73240
1. Remove existing toe/heel shifter.
2. Rub shoulder bolt through shifter arm from back side. For a heel shifter the arm may need to be
removed to facilitate this.
3. Using medium strength thread locker on bolt threads install bolt through washer then into shifter peg.
4. Align shifter peg as needed and firmly tighten 96-144 in/lbs.
Picture 1 Picture 2
Trackboard Brake Pad K73242
1. Remove the existing brake pad.
2. Align Trackboard brake pad with the brake arm.
3. Using medium strength thread locker on bolt, insert bolt thru flat washer then install bolt through
brake arm into back of the Trackboard pad.
4. Firmly tighten bolt 30-50 in/lbs. but do not over tighten.
For the latest install guides, video’s, FAQ’s. and Tech-Tip’s scan QR code!
Revision Date: 5/18/2022
www.kodlinusa.com
/