FoxESS SMART LAN User guide

Brand: FoxESS

Model: SMART LAN

Type: User guide

FoxESS SMART LAN is a device that allows you to monitor and control your solar energy system remotely. It connects to your inverter and your home Wi-Fi network, allowing you to access real-time data on your solar production, energy consumption, and battery status. You can also use the SMART LAN to control your system's settings, such as the charging and discharging thresholds for your battery. Additionally, the SMART LAN can send you notifications if there are any issues with your system, such as a power outage or a fault.

５

Via Computer

Step 1:

Open any browser and enter

‘foxesscloud.com’ on the address bar on top,

click ‘Sign up’.

Note: If you already have an installer/agent

account, please press ‘Sign in’ and enter

with your installer/agent account directly.

Step 2:

Enter informn and click ‘Sign up’ to

complete account registra

６

Step 2:

Click ‘Installer’ and enter informa then click

‘Next’ to complete account registraon.

Note: ‘*’ is required to be lled in.

７

Via Smartphone

Step 1:

Please click ‘Register’, enter end user’s

informa and click ‘Next’ to complete the

end user account registra

For End User

８

Step 2:

Select ‘End user’ then scan the LAN bar code

on the Smart LAN, and click ‘OK’.

We suggest that you l in the relevant opl

informa ensure aer-sales service.

１

Quick Installaon Guide

SMART LAN

Step 1:

Smart LAN consist by three parts. Insert the

Internet cable into the nuts on the boom, and

then make the Rj45 Port for the wiring as below.

Tighten the components.

Rotate the lock, make sure

the triangle logo is on the

front and centered.

Plug the Smart LAN into the



(underside) of the inverter.

Tighten the nut clockwise

as following.

Smart

LAN

Installa�on

２

Step 2:

Scan the QR Code below to download and

install FoxCloud APP on your smartphone or

tablet.

Installa�on

３

Via Smartphone

Step 1:

Please click ‘Register’, enter installer’s

informa and click ‘Next’ to complete the

installer account registra

Note: If you already have an installer/agent

account, please press ‘Login’ and enter with

your installer/agent account directly.

For Installer

４

Step 2:

Select ‘Installer’ and enter Installer name, then

click ‘OK’.

We suggest that you l in the relevant opl

informa ensure aer-sales service.

Note: Installer: The installer.

Agent: The agent/distributor/installa

company.

９

Via Computer

Step 1:

Please select ‘User’ then input all required

informan, and click ‘Next’ to complete

account registran.

１０

Via Smartphone

Step 1:

Step 2:

Press the ‘+’ icon on the homepage to add

plant. Press the scan icon next to the ‘Device

list’ to scan the QR code label on the side of

the Smart LAN.

Note: er starng the APP, it will pop-up a

message ‘Whether to allow pong

permissions’, please select ‘Allow’. For the

capacity, please  in the actual capacity of the

installed solar panels.

Create A Plant

For Installer

Open the APP,

Installer/agent

account.

１１

Via Computer

Press the ‘New’ on the homepage to add plant.

Complete all required informan and click

‘Create’.

１２

Via Smartphone

Step 1:

Step 2:

Press the ‘+’ icon on the homepage to add

plant. Press the scan icon next to the ‘Device

list’ to scan the QR code label on the side of

the Smart LAN.

Note: Aer starng the APP, it will pop-up a

message ‘Whether to allow pong

permissions’, please select ‘Allow’. For the

capacity, please  in the actual capacity of the

installed solar panels.

For End User

Open the APP, login with

your end user account.

１３

Note: If SN has

been

bound to the plant

already, APP will

jump

to the beside page. If

SN has not been bound

before, p

lease refer to

step 3.

１４

Step 3:

Aer scanning code successfully, click ‘OK’ on

the top right corner of the page, APP will pop-

up a message ‘Add device’, please click ‘OK’.

Complete all required informa and click ‘OK’

on the top right corner of the page.

１５

Via Computer

Step 1:

Click ‘Associate SN’, input SN and click ‘Create’.

Note: ‘*’ is required to be lled in.

１６

Note: If SN has been bound to the plant already,

website will jump to the following page. If the

SN has not been bound before, please refer to

step 2.

Step 2: It will pop-up a ‘Tip’, please click

‘Con’. Complete all required informaon

and click ‘Create’.

V1.0

10-203-00134-00

FoxESS SMART LAN User guide

Brand: FoxESS

Model: SMART LAN

Type: User guide

Download PDF

report

in other languages

eesti: FoxESS SMART LAN Kasutusjuhend

FoxESS SMART LAN User guide

FoxESS SMART LAN User guide

in other languages

Other documents