Jabra Engage 65 Convertible User manual

Engage 65 Convertible
Jabra
Brand
Jabra
Model
Engage 65 Convertible
Type
User manual

Jabra Engage 65 Convertible: Seamlessly manage conference calls with up to three additional headsets, allowing for flexible collaboration and enhanced productivity. Easily add or remove participants using simple pairing methods, either by docking the headset in the base or pairing over the air. Enjoy crystal-clear audio and the ability to mute individual headsets as needed.

Jabra Engage 65 Convertible: Seamlessly manage conference calls with up to three additional headsets, allowing for flexible collaboration and enhanced productivity. Easily add or remove participants using simple pairing methods, either by docking the headset in the base or pairing over the air. Enjoy crystal-clear audio and the ability to mute individual headsets as needed.

Jabra Engage 65 Convertible
How do I use the conference call mode with my Jabra Engage
65?
You can set up a conference call with the Jabra Engage 65 by pairing up to
three additional headsets with the same base. You can pair a headset
“over the air” or dock it in the base. If you dock a headset in the base, the
headset must have the same docking interface as the base. For example, a
Jabra Engage mono headset and a Jabra Engage mono or stereo base.
1. Add headset(s) using base docking
1. Undock the primary headset.
2. Dock an additional headset in the base.
3. When the headset has been successfully paired with the base, a voice
prompt is announced in the primary headset. Press the Call button on
the primary headset to accept the additional headset. The audio is then
shared with additional headsets, which are muted by default.
2. Add headset(s) without base docking (pair over the air)
10/09/2022 20:57
https://www.jabra.hk/supportpages/jabra-engage-65/9555-553-111/faq/fc22e06a-4783-
42e4-9446-47c7b06676ea
Page 1 of 2
1. Undock the primary headset.
2. Turn off the additional headset by holding the Call button for 4
seconds.
3. Hold the (3 seconds) on the base. The conference LED will flash.
4. Put the additional headset into pairing mode by holding the Call
button for 5 seconds until the LED on the headset flashes blue. The
base and the headset will attempt to pair.
5. Press the Call button on the primary headset to accept the additional
headset and complete the pairing. The audio is then shared between
headsets, which are muted by default.
End or leave a conference call
To end the call for all headsets, press the Call button on the primary
headset, or dock the primary headset in the base. Additional headsets can
leave the conference by pressing the Call button on the headset or by
docking the additional headset in the primary headset base (not the
additional headset base). The conference call will continue for all other
headsets.
Permanent conference mode
By default, the conference will end automatically for all additional
headsets when the call ends. To continue the conference with the
additional headsets until the primary headset is docked, change this
specific setting in Jabra Direct.
10/09/2022 20:57
https://www.jabra.hk/supportpages/jabra-engage-65/9555-553-111/faq/fc22e06a-4783-
42e4-9446-47c7b06676ea
Page 2 of 2
  • Page 1 1
  • Page 2 2

Jabra Engage 65 Convertible User manual

Engage 65 Convertible
Jabra
Brand
Jabra
Model
Engage 65 Convertible
Type
User manual

Jabra Engage 65 Convertible: Seamlessly manage conference calls with up to three additional headsets, allowing for flexible collaboration and enhanced productivity. Easily add or remove participants using simple pairing methods, either by docking the headset in the base or pairing over the air. Enjoy crystal-clear audio and the ability to mute individual headsets as needed.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents