2. ITC
  3. 69231B and 69240 LED Radiance Light

ITC 69231B and 69240 LED Radiance Light User manual

  • Hello! I've reviewed the instruction manual for the ITC 69231B and 69240 LED Radiance Lights. This document provides detailed instructions on how to install these LED lights using cutout, spring clip, screw or leaf spring mounting methods and includes safety precautions. I am ready to answer your questions about the installation process, features, and model specifics.
  • What should I do before installing the light?
    What kind of protection is recommended for the input?
    What is the mounting size for model 69231B?
    What are the methods to install the light?
Home » ITC » ITC 69231B and 69240 LED Radiance Light Instruction Manual
Contents [ hide
1 ITC 69231B and 69240 LED Radiance
Light
2 Installation Instruction
3 Documents / Resources
3.1 References
4 Related Posts
ITC 69231B and 69240 LED Radiance Light
ITC 69231B and 69240 LED Radiance Light Instruction Manual
Manuals+ — User Manuals Simplified.
Installation Instruction
PARTS/TOOLS NEEDED:
Radiance Overhead Light Wire Nuts (Not Provided) Power Drill w/Hole Saw Bi
t (Not Provided)
Mounting Screws (Not Pr
ovided)
IMPORTANT SAFETY INSTRUCTIONS.
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
Disconnect power before installing, adding or changing any component.
To avoid a hazard to children, account for all parts and destroy all packing materials.
It is recommended that fuse protection be added to the positive (+) input.
1. Determine where your LED light fixture will be installed. Once dtermined, drill a hole using a hole saw (see
chart below for hole size requirement).
1. Mounting Method : Cutout
69231B (81229) 2.25”
69240 (81232) 3.5”
69926 2.5”
2. Use the wiring diagram below to wire the light to the units power.
3. Installing the spring clip version: Push the clips on both sides of light up and slide housing and clips through
hole. Clips will snap down and hold the light in place.
4. Installing the screw mount version: Remove cover by twisting counter clockwise. Mark location of screw holes
and pre-drill. Screw in fixture and re-install cover by twisting clockwise
5. Installing the leaf spring version: Push light in at an angle and press down on opposite side until light is firmly
seated in hole
Documents / Resources
ITC 69231B and 69240 LED Radiance Light [pdf] Instruction Manual
69231B and 69240 LED Radiance Light, 69231B, 69240, 69231B LED Radiance Light, 69240 L
ED Radiance Light, LED Radiance Light, LED Light, Radiance Light, Light
References
ITC Warranty & Return Policy
Manuals+, home privacy
/