2. Emtek
  3. Keyed

Emtek Keyed Installation guide

  • Hello! I've reviewed the Installation Guide for the EMTEK keyed sideplates with lever/knob. This document describes the installation process, covering the door and jamb preparation, the installation of the bolt and latch, and how to install the trim plates. It also mentions the use of option thru bolts for hollow doors. Feel free to ask me any questions you have about the installation process.
  • What are the recommended bore sizes for the door?
    What depth should the door jamb be prepped?
    What is the purpose of the thru bolts?
Installation Guide - Keyed Sideplates; Lever/Knob
IN4-KEYPLTSLVRKNB REV. 1 11/08/21
1. Door Prep 2. Door Jamb Prep Dummy Function
4. Install Outside Trim Plate
Outside
Knob
Shown
Plates and Lever/Knob vary depending on style
5. Install Inside Trim Plate
3. Install Bolt and Latch
1/8" DEEP
3/16" DEEP
1/8” Deep
3/16” Deep
1” Dia.
Edge
Bores
2-1/4”
2-1/4”
1”
2-3/8”
or
2-3/4”
3-5/8”
or
5-1/2”
2-1/8” Dia.
Bores
1-1/8”
2-3/4”
Double Cylinder Inside
Single Cylinder Inside Tailpiece
Horizontal
Tailpiece
Vertical
Thru bolts (provided) may be
used on hollow doors instead of
wood screws (also provided).
After lock is installed,
tighten set screw with
hex wrench provided.
Optional Thru Bolts
6. Secure Lever/Knob
Lever
Shown
/