LucidSound LS50X User manual

LS50X Setup for Xbox One

Step 1: Connect the dongle to a USB port on the Xbox One.

Step 2: Turn on the headset.

Step 3: You're ready to use the headset!

To enable Windows Sonic or Dolby Atmos for Headphones:

1. Go to Settings > Volume & audio output

2. From the Headset audio menu select Headset format:

3. Now select the Stereo or Surround sound format you want to use:

LucidSound LS50X Setup and Features

https://www.youtube.com/watch?v=ZSOX7LjIhzQ

Reset Procedure for LS31 / LS41 / LS50X

To reset the LS31, LS41 or LS50 headset, simply remove the right earcup (pull straight off) and press the

button shown below momentarily using a paperclip or similar device. Once the headset has been reset

line up the tabs on the earpad with the 3 sockets on the headset and gently press the earpad back in

place.

Download PDF