2. SMART TALA
  3. ST-29 Smart Lock
ST-29 Smart Lock

SMART TALA ST-29 Smart Lock, ST-29 Installation guide

  • Hello! I've reviewed the installation guide for the SMART-TALA ST-29(FP) lock. This document provides instructions on how to install the lock, including ensuring the correct door opening, drilling the slot, connecting cables, and using the touch panel. I'm here to answer any questions you may have about it.
  • What is the default door opening for the lock?
    Are batteries included with the lock?
    Where can I download the operating manual?
INSTALLATION GUIDE ST-29(FP)
www.smart-tala.com : www.smartlock.co.in
Welcome User……..!! You now own one of the best locks with
State of the Art features.
Step1: Please ensure that lock matches with your door state.
Default is set to Right Inside Opening unless specified.
INSTALLATION GUIDE ST-29(FP)
www.smart-tala.com : www.smartlock.co.in
Step 2: Follow mortise Cut-Out to drill the slot in the Door and
assemble the lock.
INSTALLATION GUIDE ST-29(FP)
www.smart-tala.com : www.smartlock.co.in
Step 3: After Installing connect the cables as shown.
Step 4: Connect the Batteries (Not Included). The lock will beep
and touch panel illuminated. Congratulations!!
There you GO…
Step 5: Download the operating manual from website and follow
the instructions to add the lock to the application and how to
use it.
https://smart-tala.com/support.php
INSTALLATION GUIDE ST-29(FP)
www.smart-tala.com : www.smartlock.co.in
MAIN CONTENT LIST
Ser No
Item
Quantity
1
Front Panel with PCBA
01
2
Back Panel
01
3
Mortise
01
4
Key Cylinder
01
5
Metal Keys
02
6
Key Card
02
7
Strike Plate Set
01
8
Spindle & Screws
Note: Batteries not included
SUPPORT & DOWNLOADS
www.smart-tala/faq.php : www.smart-tala/support.php
Mail: [email protected]
Phone (Mon to Fri 1000-1800): +91-11-41536643
/