OE electrics INSTR1213 User guide

Unit One Unit Two

Cut locking clip as shown below

Right QF3 Blank Removable

Locking clips need to be removed

QF3 needs to be removed

Cut line for removing locking clip

Care should be taken not to damage the modules when removing the locking clips

Locking clip removed from left hand module Locking clip removed from both modules

Using pliers remove both parts of locking clips from modules

Left QF3 Blank Fixed

Locking clip Locking clip

NOTE: Schuko QikFit

shown. All QF modules

connect similarly.

Grasp half the clip and rotate

pliers toward the module,

repeat for the other half

Connecting QikFit Modules & Power Supplies

INSTR1213

www.oeelectrics.com

[email protected] / +49 (0)2261 958 3001DE -

[email protected] / 1300 ELSAFE (357 233)AUS - [email protected] / +1 (844)-927-0600U.S.A -

[email protected] / +44 (0) 1924 367 255

UK -

View the video here: QikFit Power Modules or search for connecting two QikFit Euro modules on

YouTube

Remove QF3 from right hand side of unit one using pliers