2. OE electrics
  3. QIKPAC
QIKPAC

OE electrics QIKPAC User manual

  • Hello! I've reviewed the removal instructions for the oeelectrics QIKPAC and QF5 TUF-R HP modules. This document provides step-by-step guidance on using the removal tools, including how to align them, engage clips, and extract both the modules and the tools. I'm ready to assist with any questions you might have regarding the removal process.
  • How do I start removing the QIKPAC and QF5 TUF-R HP modules?
    What is the next step after aligning tools?
    How to remove both modules at once?
    How do I remove the QIKPAC removal tool?
    How do I remove the QF5 removal tool?
QIKPAC & QF5 TUF-R HP Removal instructions
INSTR1288
www.oeelectrics.com
[email protected] / +49 (0)2261 958 3001DE -
[email protected] / 1300 ELSAFE (357 233)AUS - [email protected] / +1 (844)-927-0600U.S.A -
[email protected] / +44 (0) 1924 367 255
UK -
To remove align QikPAC and QF5 TUF-R HP
removal tools with modules. QF5 removal tool
slots into place next to QikPAC removal tool
Pull QikPAC removal tool to remove both
modules together
1
3 4
Push in clips on QikPAC removal tool
until click is heard
2
1 2
Removing the tools
Squeeze top and bottom of QF5
removal tool and pull to remove
Raise clips on QikPAC removal tool until
double click is heard and pull to remove
QIKPAC & QF5 TUF-R HP Removal instructions
INSTR1288
www.oeelectrics.com
[email protected] / +49 (0)2261 958 3001DE -
[email protected] / 1300 ELSAFE (357 233)AUS - [email protected] / +1 (844)-927-0600U.S.A -
[email protected] / +44 (0) 1924 367 255
UK -
1
Release QF5 TUF HP from QikPac
Press spring lock on right hand side of QikPac and slide QF5 TUF HP up
/