2. ProOne
  3. Under Counter Inline Conversion

ProOne Under Counter Inline Conversion User manual

  • Hello! I've reviewed the user manual for the ProOne Under Counter Inline Conversion Kit. This document provides instructions on how to convert a countertop water filter into an under-counter system. The manual describes the kit's components and provides step-by-step installation instructions including how to remove parts and using supplied flex hose and brass fittings. I'm ready to assist with any questions you have about this product.
  • What is this kit for?
    What parts are included in the kit?
    What should I do periodically?
For technical support call
1(800)544-3533 or email
[email protected]
Under Counter Inline Conversion Kit
This kit is used specifically for converting a single stage countertop
unit to an under counter unit that runs inline with the existing cold
water line.
(c)
(b)
(a)
Contents
Your kit includes
the following:
(a) bracket w/4 screws
(b) brass fittings (2)
(c) stainless steel 30”
flex hose with 3/8”
female ends
Installing Your Kit
Uninstall countertop unit from faucet.
Remove base from countertop unit.
Install bracket(a) in place of countertop base.
Remove spout and
existing inlet fitting.
Install new lead
free brass fittings(b)
using Teflon tape (about
2 wraps per fitting)
Turn off cold water
supply under sink.
Remove existing line
from shutoff valve.
Install flex hose(c)
Reconnect line (d)
*Periodically check
installation for any leaks.
1.
2.
3.
4.
5.
6.
8.
7. (b) (b)
(a)
(c)
(d)
9.
/