2. saco
  3. EOB5440AOX

saco EOB5440AOX User manual

  • Hello! I've reviewed the Operating Instructions for the Electrolux oven model EOB5440AOX. This document details how to use the oven's control panel, select oven functions, set the temperature, and use the electronic programmer for timing. It also covers clock settings. I am ready to answer your questions about this oven based on the information provided.
  • How do I select an oven function?
    How do I set the temperature?
    How do I deactivate the appliance?
    How do I set the clock functions?
Operating Instructions - Oven Electrolux EOB5440AOX
1. Control Panel
2. Dial for the oven functions
3. Power lamp/symbol
4. Electronic programmer
5. Dial for the temperature
6. Temperature lamp/symbol/indicator
7. Heating element
8. Lamp
9. Fan
10. Rear wall heating element
11. Bottom heat
12. Shelf support, removable
13. Shelf positions
Quick instructions on how to use
Turn the control dial for the oven functions to select an oven function
Turn the control dial for the temperature to select a temperature
To deactivate the appliance turn the control dials for the oven functions and temperature to the off position.
Oven functions
Electronic Programmer
1. Function indicators
2. Time display
3. Function indicator
4. Button +
5. Selection button
6. Button -
Clock functions
Setting the clock functions
1. For Duration and End, set an oven function and temperature. This is not necessary for the Minute Minder.
2. Press the Selection button again and again until the indicator for the necessary clock function flashes.
3. Press the + or – to set the necessary clock function. The display shows the indicator for the clock function you
set. When the set time ends, the indicator flashes and an acoustic signal sounds for two minutes.
4. Press a button to stop the signal
5. Turn the dial for the oven functions and the dial for the temperature to the off position
Cancelling the clock functions
1. Press the Selection button again and again until the necessary function indicator flashes
2. Press and hold the button – after some seconds the clock function goes out.
/