Lutec 7635202053 Installation guide

Brand
Lutec
Model
7635202053
Type
Installation guide

Lutec 7635202053 is a motion-activated light fixture designed for outdoor use in wet locations. It features adjustable settings for the duration of light activation after motion detection (1, 3, or 10 minutes), the detection distance (0-20 ft., 20-39 ft., or 39-59 ft.), and the light brightness (low or full). The fixture also has a test mode that allows you to check the sensor's functionality during daylight hours.

Lutec 7635202053 is a motion-activated light fixture designed for outdoor use in wet locations. It features adjustable settings for the duration of light activation after motion detection (1, 3, or 10 minutes), the detection distance (0-20 ft., 20-39 ft., or 39-59 ft.), and the light brightness (low or full). The fixture also has a test mode that allows you to check the sensor's functionality during daylight hours.

WARNING
• To avoid water damage and the risk of electrical shock, the motion sensor
controls must be facing the ground when installation is complete.
• Do not install motors, transformers, or fluorescent light fixtures on the same
circuit as the fixture.
Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
Model #7635202053
WET LOCATION
• Consult a qualified electrician if you are not certain about the installation process.
Always install wiring connections in accordance with the local code, ordinances,
and the National Electric Code.
• Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
• Do not attempt to install this product while it is plugged in.
• Do not connect this light fixture to a dimmer switch or timer.
• This light fixture is designed to fit standard junction boxes as defined by the
National Electrical Code.
67 8
ON
1 2
4
OFF
Black-Black
White-White
Green-Green
3
5
10
8.20 ft
0-59 ft
180°
Manual Override: Force the fixture to override the TEST, SECURITY or DUSK TO DAWN mode so the light will stay on. Turn the light on
manually from the wall switch. With the fixture already in the ON position, continuously flip the wall switch off and then back on twice in 3
seconds.
There are three ways to revert back to the previous mode:
Once again flip the wall switch off, wait for more than 3 seconds and then turn back on.
If you leave the light on, the light will stay on for about 6 hours, then return.
Turns on at night and stays on at low brightness, then turns
to full brightness if motion is detected.
Deactivates during daylight hours.
Turns on at night only when motion is detected.
Deactivates during daylight hours.
Tests the sensor’s functionality even during daylight hours.
After motion stops, the light will remain on full brightness
for 5 seconds and then turn to low brightness.
MOTION DETECTION
(WITH DUSK TO DAWN)
L, M, or H
L= 0-20 ft.
M= 20-39 ft.
H= 39-59 ft.
Adjusts how far the sensor
detects motion.
“D2D”
Sensor defaults to 39-59 ft.
coverage when set to “D2D”.
OPERATION “TIME” Setting DESCRIPTION
TEST MODE
MOTION DETECTION
(WITHOUT
DUSK TO DAWN)
“DISTANCE” Setting
TEST
1, 3, or 10 (minutes)
Adjusts how long the
light stays on after
detecting motion before
shutting off.
Any setting
1, 3, or 10 (minutes)
Adjusts how long the
light stays on after
detecting motion before
shutting off.
Service: LUTEC USA LLC:
149B Houston Rd Troutman NC 28166
Ningbo UTEC Electric Co.,LTD
CN8, Far East Industry Park , Yuyao, China
www.lutec.com
[email protected]
Please call our Customer Service line at 877-714-8669
for assistance Monday - Friday 9 a.m. to 5 p.m. EST
  • Page 1 1
  • Page 2 2
  • Page 3 3

Lutec 7635202053 Installation guide

Brand
Lutec
Model
7635202053
Type
Installation guide

Lutec 7635202053 is a motion-activated light fixture designed for outdoor use in wet locations. It features adjustable settings for the duration of light activation after motion detection (1, 3, or 10 minutes), the detection distance (0-20 ft., 20-39 ft., or 39-59 ft.), and the light brightness (low or full). The fixture also has a test mode that allows you to check the sensor's functionality during daylight hours.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents