2. Fanvil
  3. IP Scan
IP Scan

Fanvil IP Scan Operating instructions

  • Hello! I have analyzed the Fanvil IP Scan Tool Instructions. This document provides information on how to use the tool to scan devices, modify network parameters, and change the language. I am ready to answer your questions about the tool and its capabilities.
  • What is the main purpose of the Fanvil IP scanning tool?
    What network parameters can be modified using the tool?
    Can I use this tool for any Fanvil device?
    What languages does the IP scanning tool support?
Version：<1.0>
Release Date：<2020-9-4>
IP Scan Tool Instructions
Fanvil Technology Co., Ltd
Add: 10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China.
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: suppor[email protected] www.fanvil.com
2/6
Content
Content ...............................................................................................................................................2
1Revise History ................................................................................................................................ 3
2Introduction ................................................................................................................................... 4
2.1 Overview ............................................................................................................................4
2.2 Applicable Model .............................................................................................................. 4
2.3 Target Audience .................................................................................................................4
3Instructions for use ........................................................................................................................5
3.1 Scan ....................................................................................................................................5
3.2 Change Parameter ..............................................................................................................5
3.3 Set Language ..................................................................................................................... 6
3 / 6
1 Revise History
Revise History:
Version
Author
Release Time
Description
1.0
Initial Version
4 / 6
2 Introduction
2.1 Overview
Products without screens are not very convenient to deploy and use. Fanvil IP scanning
tool is convenient to obtain device information and modify network parameters.
This document mainly introduces the use of IP scanning tools.
2.2 Applicable Model
This document applies to Fanvil i12, i16V, i18S, i20S, i23S, i30, i31S, i32V, i33V/i33VF,
PA2,etc.
2.3 Target Audience
This document is for people using IP scanning tools.
5 / 6
3 Instructions for use
3.1 Scan
Open the scan tool and click the scan button on the right to scan the azimuth devices in
the local area network.
3.2 Change Parameter
IP scanning tool supports modifying device IP address and device description
information
1) Select the device to be modified
2) Click the Modify Parameters button on the right
3) You can see the information as shown in the figure below. If the device uses DHCP,
DHCP is checked, and the IP address cannot be modified at this time; when the DHCP
check is removed, the device network can be modified to a static IP. Support modifying
IP address, subnet mask, gateway; after setting the information to be modified, you need
to enter the user name and password of the device (administrator user name and
password)
4) After the modification is completed, click Submit, wait for the prompt to modify the
6 / 6
parameters successfully, and you can see the setting information in the scan list.
3.3 Set Language
The IP scanning tool supports setting the language, you can choose Chinese
or English, as shown in the following figure:
It takes effect immediately after setting.
/