Brigade IP-1200C (5937) User manual

IP-1200C (5937)
Brigade
Brand
Brigade
Model
IP-1200C (5937)
Category
Security cameras
Type
User manual

Brigade IP-1200C (5937) is an interior dome camera with audio, designed for high-quality footage capture. It features 1080P resolution, 129º(D) 106º(H) 61º(V) lens angle, and effective horizontal resolution of 800 TV Lines. With H.264 or H.265 video compression and MDR5, TCP/IP, HTTP, DHCP, NTP, FTP network protocols, it offers versatile connectivity options. Ideal for retrospective evidence in the event of incidents, it operates in temperatures ranging from -40°C to 70°C and has a compact design (101.5mm x 54.6mm x 96mm) for easy installation.

Brigade IP-1200C (5937) is an interior dome camera with audio, designed for high-quality footage capture. It features 1080P resolution, 129º(D) 106º(H) 61º(V) lens angle, and effective horizontal resolution of 800 TV Lines. With H.264 or H.265 video compression and MDR5, TCP/IP, HTTP, DHCP, NTP, FTP network protocols, it offers versatile connectivity options. Ideal for retrospective evidence in the event of incidents, it operates in temperatures ranging from -40°C to 70°C and has a compact design (101.5mm x 54.6mm x 96mm) for easy installation.

Contents
IP-1200C
Quick installation instructions
www.brigade-electronics.com
Part #5969/#5961/5962
This guide is available in: xXxxxxx at
www.brigade-electronics.com/productsupportarea
IG 5973
Step 1
After connecting the IP camera with an MDR, go to the MDR On Screen
Display. Right click to show the function bar and click the prole icon.
Step 2
Input password. (Default is “admin”).
Step 3
Choose “Setup”
Step 4
Click "Surveillance" -> "IPC Setup" -> "Fast Setup"
Step 5
The MDR will start to search and connect to all IP Cameras (This will take
1-3 seconds).
The left side of the screen will show a live view of the IP camera. The right
half of the screen will show basic set up options.
IPC ID: A / B;
A = current showing IP camera ID
B = total IP camera/s detected
Binding CH: assign the IP camera to the preferred channel.
Note: It is recommended to choose channels 5-6 when using an
MDR-504XX-XXXX and channels 9-16 when using an
MDR-508XX-XXXX to avoid conict with analogue cameras.
Do not change Protocol Type from default settings of 'MDRS'
After binding EACH camera channel click “Save”.
Use Buttons “Previous CH” and “Next CH” to view and setup each IP
camera
Click “Exit” to exit IP camera setup page.
Step 6
Go back to the Live view page, the IP camera has been successfully
assigned to a specic channel number.
No Devise No Devise No Devise
No Devise No Devise No Devise
(80.6)
BLACK RUBBER PAD
1
2
3
4
5
6
VIEW A
6 PIN FEMALE
MATING FACE
(15 ± 0.5)
(400 ± 15)
PRODUCT CABLE
LABEL LOCATION
(15)
A
(35)
(4.8)
(101.5)
(54.6)
(14.8)
(23.8)
(36.4)
(96)
(0.7)
CABLE EXIT
1
(83)
(64)
ASSEMBLY TORX SCREWS
(2 FOR EACH SIDE
PIN # Wire Colour Description
1 ORANGE) TX-
2 ORANGE-WHITE TX+
3 RED +12V
4 GREEN RX-
5 GREEN-WHITE RX+
6 BLACK GND
Part No. Model No. Quantity Description
5962 IP-1200C-C 1 IP Camera only - Interior use, Audio (1080P)
5972 IP-1200C-FIX 1 2 x M3 Fixing Screws and 1 x T10 TORX
Wrench (L Shape) (Not shown)
Contents
IP-1200C
Quick installation instructions
www.brigade-electronics.com
Part #5969/#5961/5962
This guide is available in: xXxxxxx at
www.brigade-electronics.com/productsupportarea
IG 5973
Contents
IP-1X00C
Quick installation instructions
www.brigade-electronics.com
Part #5969/#5961/5962
This guide is available in: xXxxxxx at
www.brigade-electronics.com/productsupportarea
IG 5905
Contents
IP-1X00C
Quick installation instructions
www.brigade-electronics.com
Part #5969/#5961/5962
This guide is available in: xXxxxxx at
www.brigade-electronics.com/productsupportarea
IG 5905
Quick Start Steps
Specifications
Quick Start Steps
Specifications
Contents
IP-1X00C
Quick installation instructions
www.brigade-electronics.com
Part #5969/#5961/5962
This guide is available in: xXxxxxx at
www.brigade-electronics.com/productsupportarea
IG 5905
Contents
IP-1X00C
Quick installation instructions
www.brigade-electronics.com
Part #5969/#5961/5962
This guide is available in: xXxxxxx at
www.brigade-electronics.com/productsupportarea
IG 5905
Quick Start Steps
Specifications
Internet Protocol cameras have an inherent time delay and are designed
to capture footage and help drivers and operators by providing high
quality retrospective evidence in the event of an incident.
Internet Protocol cameras should not be used as a driver aid when
performing vehicle manoeuvres and do not exempt the driver from taking
every normal precaution to ensure safety.
No liability arising out of the use or failure of the product can in any way
be attached to Brigade or to the distributor.
Disclaimer
IP-1200C
Quick Start Steps
Specifications
Inside view (front to rear)
IP-1200C
IP-1200C - Internal dome camera
PICK-UP DEVICE CMOS
VIDEO COMPRESSION H.264 or H.265
NETWORK PROTOCOL MDR5, TCP/IP, HTTP, DHCP, NTP, FTP
PICTURE ELEMENTS 1920*1080
IMAGE SIZE 1/2.9
EFFECTIVE HOR. RESOLUTION 800 TV Lines
REQUIRED ILLUMINATION 0.1 Lux (Color Illumination)
POWER SUPPLY 12Vdc ± 2Vdc
POWER CONSUMPTION 3.5W (at 12Vdc)
LENS ANGLE 129º(D) 106º(H) 61º(V)
OPERATING TEMPERATURE RANGE -40°C ~ 70°C
STORAGE TEMPERATURE RANGE -40°C ~ 85°C
WEIGHT 436g
DIMENSIONS (W x H x D) 101.5mm x 54.6mm x 96mm
Camera views
Part #5937
The guide is available in Dutch, French, German, Italian, Polish,
Portuguese, Russian, Spanish and Turkish at
www.brigade-electronics.com/productsupportarea
No Device
No Device No Device
No Device
No Device
No Device
Connection with multiple cameras
Option 2: Connecting multiple IP cameras to the MDR using 4-CH or 8-CH PON Switch
Option 1: 1 x IP Camera connecting directly to the MDR
12V regulated DC power supply must be used to power IP Cameras (if PON Switch is not used). Alternatively, Brigade recommends the 12V DC supply output
from MDR IO cable.
Connections with 1 camera
Quick Start Steps
Specifications
** MDR-504XX-XXXX NOT COMPATIBLE WITH IP-EM-8
**
  • Page 1 1
  • Page 2 2

Brigade IP-1200C (5937) User manual

IP-1200C (5937)
Brigade
Brand
Brigade
Model
IP-1200C (5937)
Category
Security cameras
Type
User manual

Brigade IP-1200C (5937) is an interior dome camera with audio, designed for high-quality footage capture. It features 1080P resolution, 129º(D) 106º(H) 61º(V) lens angle, and effective horizontal resolution of 800 TV Lines. With H.264 or H.265 video compression and MDR5, TCP/IP, HTTP, DHCP, NTP, FTP network protocols, it offers versatile connectivity options. Ideal for retrospective evidence in the event of incidents, it operates in temperatures ranging from -40°C to 70°C and has a compact design (101.5mm x 54.6mm x 96mm) for easy installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents