Nakamichi NSW-X1203S4 is a 12" (Ø320 mm) SLIM SVC subwoofer with a nominal impedance of 4 ohms and a power rating of 250W RMS. It has a sensitivity of 83±3 dB and a frequency range of 40~2.7k Hz. The voice coil diameter is Ø50 mm and the voice coil length is 18 mm. The air gap height is 8 mm and the magnet dimension is Ø140 x 20 mm. The resonant frequency (FS) is 40±3 Hz, the D.C. voice coil resistance (Re) is 3.6 ohms, the mechanical quality factor (Qms) is 6.528, the electrical quality factor (Qes) is 1.251, the total quality factor (Qts) is 1.050, the equivalent
Nakamichi NSW-X1203S4 is a 12" (Ø320 mm) SLIM SVC subwoofer with a nominal impedance of 4 ohms and a power rating of 250W RMS. It has a sensitivity of 83±3 dB and a frequency range of 40~2.7k Hz. The voice coil diameter is Ø50 mm and the voice coil length is 18 mm. The air gap height is 8 mm and the magnet dimension is Ø140 x 20 mm. The resonant frequency (FS) is 40±3 Hz, the D.C. voice coil resistance (Re) is 3.6 ohms, the mechanical quality factor (Qms) is 6.528, the electrical quality factor (Qes) is 1.251, the total quality factor (Qts) is 1.050, the equivalent
Nakamichi NSW-X1203S4 is a 12" (Ø320 mm) SLIM SVC subwoofer with a nominal impedance of 4 ohms and a power rating of 250W RMS. It has a sensitivity of 83±3 dB and a frequency range of 40~2.7k Hz. The voice coil diameter is Ø50 mm and the voice coil length is 18 mm. The air gap height is 8 mm and the magnet dimension is Ø140 x 20 mm. The resonant frequency (FS) is 40±3 Hz, the D.C. voice coil resistance (Re) is 3.6 ohms, the mechanical quality factor (Qms) is 6.528, the electrical quality factor (Qes) is 1.251, the total quality factor (Qts) is 1.050, the equivalent
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI