KOOL-FLO SFSR3-400CPT Owner's manual

Brand
KOOL-FLO
Model
SFSR3-400CPT
Type
Owner's manual

KOOL-FLO SFSR3-400CPT is a 16-inch oscillating stand fan that can operate on three different speed settings: low, medium, and high. It also has an oscillation function that allows it to rotate back and forth, providing wider air distribution. The fan comes with a 5-Amp fuse for added safety and a 2-year limited warranty from the manufacturer. It is designed for indoor use only and should not be used outdoors, near fires, or with an extension cord. Assembly is required and instructions are included in the manual.

KOOL-FLO SFSR3-400CPT is a 16-inch oscillating stand fan that can operate on three different speed settings: low, medium, and high. It also has an oscillation function that allows it to rotate back and forth, providing wider air distribution. The fan comes with a 5-Amp fuse for added safety and a 2-year limited warranty from the manufacturer. It is designed for indoor use only and should not be used outdoors, near fires, or with an extension cord. Assembly is required and instructions are included in the manual.

16 IN. OSCILLATING STAND FAN
MODEL: SFSR3-400CPT
READ & SAVE THESE INSTRUCTIONS
Questions, problems, missing parts? Before returning to
the store, please call customer service at
888-965-8033
Monday thru Friday 8:00 AM to 8:00 PM EST/EDT
OWNER’S MANUAL
ITEM #1158600
WARNING
CAUTION
1. Read and save these instructions. Do not operate fan unless you have
read these instructions.
2. Unplug the fan before moving it or performing maintenance. Do not touch
the fan when your hands are wet.
3. Those who are not qualified electricians should not disassemble, repair or
rebuild the fan.
4. Unplug the fan when it is not in use.
5. DO NOT unplug the fan by pulling the cable cord. Unplug by holding the
plug and pulling.
6. DO NOT use the fan when there is damage to the cable cord or plug. If
the supply cord is damaged, it has to be replaced by the manufacturer,
its service agent or similarly qualified persons.
7. DO NOT use the fan with extension cord.
8. DO NOT use the fan close to fires.
9. DO NOT insert your hand or other objects into the grille or the movable
parts.
10. To reduce the risk of fire or electric shock, do not use this fan with any
solid-state speed control device.
11. DO NOT use this fan outdoors, this fan is designed for indoor use only.
1. Unplug the fan from the socket and clean it with a soft cloth.
2. DO NOT immerse the fan.
3. Fit the guard onto fan before starting up the fan.
4. This fan is not intended for use by people (including children) with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge unless they have been given supervision or instruction
concerning use of the fan by a person responsible for their safety.
Supervise children to ensure they do not play with the fan.
SAFETY INFORMATION
2
ASSEMBLY INSTRUCTION
1. Assemble the standing pole (A),
2. Loosen height adapter (D). Adjust
upperpole (E) to the desired height
and then fix it by screw (D).
3. Press the pop-ups (F) and insert
pole (G) into upper ploe (E) and
push together until they pop out.
4. Place the rear grill (H) against the
motor housing (J), insert the two
upper buckles (I) into the buckle
3
by using screw (AA) and
base (B) and weight (C) together
holes and slide them down to the
holes. Align the lower buckle with
the screw hole and tighten the
screw (CC) and washer (DD) to
secure the rear grill to the motor.
A
A
B
B
C
BB
AA
washer (BB).
D
E
D
E
G
E
F
G
H
F
E
J
I
J
H
CC
DD
ASSEMBLY INSTRUCTION
6. Place the front grill (M) against the
rear grill (H) and push them
together by the clip (N).
7. Fasten all the clips (N). Lock
the front grill (M) and rear
grill (H) by using screw (FF),
4
washer (GG) and nut (HH).
5. Insert the fan blade (K) into the
motor shaft (L) and tighten them
by screw (EE).
K
EE
L
M
N
H
M
N
H
N
N
FF
GG
M
H HH
FF
M
H
OPERATION INSTRUCTION
5
Place the fan on a safe, flat surface where it can not fall or be pulled by
the cord.
Adjust the desired speed by pulling the chain switch at the back of fan (A1).
The fan comes with an additional oscillation function.
0 Stop 1 Low 2 Medium 3 High
A1 A2
A3
Turn the oscillation function on by pushing the oscillation button down (A2)
To change the angle of the fan, loosen the angle adjuster, and then tilt
the protective screen up or down and finally retighten the angle adjuster (A3)
0
1
2
3
CARE AND MAINTENANCE
The manufacturer warrants this product to be free from manufacturing
defects in the material and workmanship under normal use for a period of
two years after the date of purchase by the original purchaser.
This warranty does not cover transit damages. This warranty does not apply
to damages from accident, misuse, alteration of any kind to the fan or where
the connected voltage is more than above the nameplate voltage. This
warranty does not apply to the finish on any portion of the product. Servicing
performed by unauthorized persons shall render the warranty invalid. The
warranty is not responsible for damages of any kind, including accident and
consequential damages. Some states do not allow the exclusion or limitation
of the incidental or consequential damages, so the above exclusion or
limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
2-YEAR LIMITED WARRANTY
6
This plug is a safety feature that contains a safety device (fuse). If your
replaceable fuse (5 Amp) blows, follow these instructions to replace the
1. Unplug your fan, grasp the plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
2. Slide open the fuse cover at the side of the plug by using your thumb
or a flat screwdriver.
3. Remove the fuse carefully.
4. Install a new 5 Amp fuse and ensure it is secured in place.
5. Slide back the fuse cover completely.
fuse.
fuse cover
fuse
For replacement parts, call the customer service at 888-965-8033, Monday
thru Friday 8:00 AM to 8:00 PM EST/EDT.
REPLACEMENT PARTS LIST
7
PART DESCRIPTION PART #
1
Blade
SFSR3-400CPT-01
2
Capaci tor
SFSR3-400CPT-02
3 Switch SFSR3-400CPT-03
4 Switch knob SFSR3-400CPT-04
2
1
3
4
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
VENTILADOR OSCILANTE CON
SOPORTE DE 16 PULGADAS
MODELO: SFSR3-400CPT
MANUAL DEL USUARIO
ARTÍCULO #1158600
LEA Y CONSERVE ESTAS INSTRUCCIONES
¿Tiene preguntas, problemas o le faltan piezas? Antes de
devolverlo a la tienda, llame al servicio de atención al
cliente al
888-965-8033
De lunes a viernes de 8:00 a. m. a 8:00 p. m. EST/EDT
15
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

KOOL-FLO SFSR3-400CPT Owner's manual

Brand
KOOL-FLO
Model
SFSR3-400CPT
Type
Owner's manual

KOOL-FLO SFSR3-400CPT is a 16-inch oscillating stand fan that can operate on three different speed settings: low, medium, and high. It also has an oscillation function that allows it to rotate back and forth, providing wider air distribution. The fan comes with a 5-Amp fuse for added safety and a 2-year limited warranty from the manufacturer. It is designed for indoor use only and should not be used outdoors, near fires, or with an extension cord. Assembly is required and instructions are included in the manual.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Other documents