Uniden SR30C User manual

SR30C Owner’s

Manual

Irving, Texas U01UB385ZZZ(0)

BC

2

PRECAUTIONS

Before you use this scanner, please read and observe the

following.

IMPORTANT

This scanning radio has been manufactured so that it will not

tune to the radio frequencies assigned by the FCC for cellular

telephone usage. The Electronic Communications Privacy Act

of 1986, as amended, makes it a federal crime to intentionally

intercept cellular or cordless telephone transmissions or

to market this radio when altered to receive them. The

installation, possession, or use of this scanning radio in a

motor vehicle may be prohibited, regulated, or require a

permit in certain states, cities, and/or local jurisdictions. Your

local law enforcement ocials should be able to provide you

with information regarding the laws in your community.

Changes or modications to this product not expressly

approved by Uniden, or operation of this product in any way

other than as detailed by this Operating Guide, could void

your authority to operate this product.

EARPHONE WARNING!

Be sure to use only a monaural earphone with this scanner.

You can also use an optional stereo headset. Use of an

incorrect earphone or mono headset might be potentially

hazardous to your hearing. The output of the phone jack is

monaural, but you will hear it in both headphones of a stereo

headset.

3

Set the volume to a comfortable audio level coming from

the speaker before plugging in the monaural earphone or

headset. Otherwise, you might experience some discomfort

or possible hearing damage if the volume suddenly becomes

too loud because of the volume control or squelch control

setting. This might be particularly true of the type of

earphone that is placed in the ear canal.

4

CONTENTS

PRECAUTIONS ......................................2

THE FCC WANTS YOU TO KNOW ......................7

SCANNING LEGALLY ................................... 8

INTRODUCTION ....................................10

SR30C FEATURE HIGHLIGHTS .........................10

FREQUENCY RANGE ..................................13

USA BAND PLAN .....................................14

CANADA BAND PLAN ................................. 16

SCANNING BASICS .................................17

WHAT IS SCANNING? .................................17

WHAT IS SEARCHING? ................................17

Conventional Scanning ............................18

Simplex Operation .................................18

Repeater Operation ................................19

WHAT ARE BANKS? ...................................19

Channel Storage Banks ............................19

Service Search Bands ..............................19

Custom Search Ranges ............................20

WHERE TO LEARN MORE ..............................20

SETUP .............................................21

WHAT’S IN THE BOX? .................................21

SETTING UP THE SCANNER ...........................22

Connect the Antenna ..............................22

Connect an Optional Earphone/Headphone ........23

Connecting an Optional Extension Speaker .........23

Adjusting the Belt Clip .............................23

POWERING THE SCANNER ............................23

Installing Non-Rechargeable Batteries ..............24

5

Installing Rechargeable 2300mAh Ni-MH Batteries .. 24

Charging the Ni-MH Batteries through USB Connection

25

Low Battery Alert ..................................27

TURN ON THE SCANNER .............................27

Adjust Squelch ....................................28

Adjusting for Interference ..........................28

SR30C CONTROLS AND DISPLAY ....................29

HARDWARE DESCRIPTION ............................29

Keypad ............................................ 29

Scroll Control Knob ................................32

LCD DISPLAY .........................................32

OPERATION ........................................35

SEARCHING ..........................................35

Quick Search ......................................35

Custom Search ....................................36

Service Search .....................................37

STORING FREQUENCIES ..............................38

Erasing a Stored Frequency ........................39

SCANNING ...........................................39

Enabling/Disabling Channel Banks .................39

Scan the Stored Channels ..........................40

Manually Select a Channel .........................40

SPECIAL FEATURES .................................42

CLOSE CALL® RF CAPTURE ............................42

Close Call Operation Mode .........................42

Using Close Call Mode ............................43

LOCKING OUT CHANNELS AND FREQUENCIES ........44

Temporary Lock Out ...............................45

Permanent Lock Out ...............................45

6

Unlock ............................................45

PRIORITY .............................................46

DELAY ................................................47

KEYLOCK .............................................48

BACKLIGHT ........................................... 49

PC PROGRAMMING ...................................49

TROUBLESHOOTING ...............................50

CARE AND MAINTENANCE ..........................53

RESETTING THE SCANNER ............................53

GENERAL USE ........................................53

LOCATION ............................................53

CLEANING ............................................54

REPAIRS ..............................................54

BIRDIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

SPECIFICATIONS ...................................56

ONEYEAR LIMITED WARRANTY ....................58

7

THE FCC WANTS YOU TO KNOW

WARNING! Uniden does not represent this unit to be

water proof. To reduce the risk of re or electrical

shock, do not expose this unit to rain or moisture.

Uniden® and Close Call® are registered trademarks of Uniden

America Corporation. Other trademarks used throughout

this manual are the property of their respective holders.

This scanner has been tested and found to comply with

the limits for a scanning receiver, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This scanner generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this scanner does cause

harmful interference to radio or television reception, which

can be determined by turning the scanner on and o, you

are encouraged to try to correct the interference by one or

more of the following methods:

• Reorient or relocate the receiving antenna

• Increase the separation between the scanner and the

receiver

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: 1) This device

may not cause harmful interference, and 2) this device must

8

accept any interference received, including interference that

may cause undesired operation.

SCANNING LEGALLY

Your scanner covers frequencies used by many dierent

groups, including police and re departments, ambulance

services, government agencies, private companies, amateur

radio services, military operations, pager services, and

wireline (telephone and telegraph) service providers. It is

legal to listen to almost every transmission your scanner

can receive. However, there are some transmissions that you

should never intentionally listen to. These include:

• Telephone conversations (cellular, cordless, or other

private means of telephone signal transmission)

• Pager transmissions

• Any scrambled or encrypted transmissions

According to the Electronic Communications Privacy Act

(ECPA), you are subject to nes and possible imprisonment

for intentionally listening to, using, or divulging the contents

of such a conversation unless you have the consent of a

party to the conversation (unless such activity is otherwise

illegal). This scanner has been designed to prevent the

reception of cellular telephone transmissions and the

decoding of scrambled transmissions. This is done to comply

with the legal requirement that scanners be manufactured

so they are not easy to modify to pick up these transmissions.

Do not open your scanner’s case to make any modications

that could allow it to pick up transmissions that are illegal to

monitor. Modifying or tampering with your scanner’s internal

9

components or using it in a way other than as described in

this manual could invalidate your warranty and void your FCC

authorization to operate it.

In some areas, mobile use of this scanner is unlawful or

requires a permit. Check the laws in your area. It is also illegal

in many areas (and a bad idea everywhere) to interfere with

the duties of public safety ocials by traveling to the scene

of an incident without authorization.

10

INTRODUCTION

Thank you for purchasing a Uniden SR30C handheld scanner.

The scanner is versatile, compact, and easy to use. In

addition to its standard scanning features, your scanner also

includes Close Call® RF capture technology designed to help

you detect and identify strong local radio signals in your

area.

You can program up to 500 frequencies into the scanner’s

memory. The scanner lets you scan transmissions and is

preprogrammed with service bands for your convenience.

You can quickly search those frequencies most commonly

used by police and other agencies without tedious and

complicated programming. The scanner gives you direct

access to over 32,000 exciting frequencies.

Use your scanner to monitor:

• Police and re departments (including rescue and

paramedics)

• NOAA weather transmissions

• Business/Industrial radio

• Utilities

• Marine and amateur (ham radio) bands

• Aircraft band

SR30C FEATURE HIGHLIGHTS

Close Call® RF Capture Technology - you can set the

scanner so it detects and provides information about nearby

radio transmissions. See page 42 for more information on the

Close Call RF feature.

11

PC Programming - lets you program your scanner using

your PC.

Custom Search - lets you program up to 10 custom search

ranges and search any or all of those ranges.

Quick Search - allows you to enter a frequency and start

searching up or down from that frequency.

Turbo Search - increases the search speed from 100 to 300

steps per second automatically for bands with 5 kHz steps.

Search Lockout - allows you to lock out up to 200 search

frequencies (100 temporary and 100 permenant) in Custom,

Service, Close Call, or Quick Search modes.

Lock-Out Function - lets you set your scanner to skip

over specied channels or frequencies when scanning or

searching. You must manually unlock these channels.

Temporary Lock-Out Function - lets you set your scanner to

skip over specied channels or frequencies when scanning

or searching. This temporary lock-out releases when you

manually unlock the channels or frequencies or when you

power down the scanner.

Priority Channels - You can program one channel in each

bank as a priority channel (10 priority channels total).

The scanner checks that channel every 2 seconds while it

scans the bank so you do not miss transmissions on those

channels. (Default=Priority O)

Priority Scan - lets you set the Priority feature to check each

channel every 2 seconds regardless of whether or not the

scanner is receiving transmissions.

12

Priority Scan with Do Not Disturb - lets you set the Priority

feature to check each channel every 2 seconds as long as the

scanner is not receiving transmissions.

Duplicate Channel Alert - lets you know when you have

entered a frequency that is already registered on another

channel.

Channel Storage Banks - the scanner has 10 banks. You can

store up to 50 frequencies into each bank (for a total of 500

frequencies), so you can more easily identify calls.

Two-Second Scan Delay - delays scanning for about 2

seconds before moving to another channel so you can hear

more replies that are made on the same channel.

Do Not Disturb prevents the scanner from interrupting

transmissions during receiving.

Ten Service Bands - frequencies are preset in separate

Weather, Police, Fire/Emergency, Marine, Racing, Civil Air,

HAM Radio, Railroad, CB Radio, and Other (Other = FRS/

GMRS/MURS) bands to make it easy to locate specic types

of calls.

Key Lock - lets you lock the scanner’s keys to help prevent

accidental changes to the scanner’s programming.

Direct Access - lets you directly access any channel.

Two Level Display Backlight - Two brightness levels make

the scanner easy to read in low-light situations.

Flexible Antenna with BNC Connector - provides adequate

reception in strong signal areas and is designed to help

prevent antenna breakage. You can also connect an external

antenna for better reception.

13

Memory Backup - keeps the frequencies stored in memory

for an extended time if the scanner loses power.

Three Power Options - Use the supplied USB cable to

charge the SR30C through your computer or other USB

charging port. You can also power the scanner using two

AA rechargeable Ni-MH batteries (not included) or optional

alkaline batteries.

Key Conﬁrmation Tones - the scanner sounds a tone when

you perform an operation correctly, and an error tone if you

make an error.

Battery Low Alert - warns you when battery power gets

low. The Battery Low icon ashes ( ) and a battery low

tone sounds every 15 seconds until the scanner is recharged,

turned o, or drained completely.

Battery Save - works when there is no transmission for 1

minute in Scan Hold mode and in any Search Hold mode

(does not work in Priority Scan and Close Call Scan modes).

This feature turns o RF power for 1 second and turns it on in

300ms intervals to extend the battery live.

Scan/Search Delay/Resume - controls whether the scanner

pauses at the end of the transmission to wait for a reply. You

can set the Delay time for each Channel, Close Call Search,

Custom Search, and Service Search mode.

FREQUENCY RANGE

These tables list the frequency ranges, default frequency

step, default mode (AM or NFM), and type of transmissions

you can hear for each range for USA or Canadian bands.

14

Select the band plan (USA or Canada) when you turn on the

scanner (default = USA). Press and hold the key for 2-3

seconds to turn on the scanner while pressing and holding 1

for USA or 2 for Canada. The band plan will remain until you

change it again.

USA BAND PLAN

Frequency Range

(MHz)

Step

(kHz)

Mode Transmission

25.00000-27.99500 5.0 AM Citizens Band/

Business Band

28.00000-54.00000 5.0 NFM 10 Meter

Amateur Band

108.00000-136.99166 8.33 AM Aircraft Band

137.00000-150.77000 5.0 NFM Military Band

15

Frequency Range

(MHz)

Step

(kHz)

Mode Transmission

150.77500-150.81250 7.5 NFM

VHF High Band

150.81500-154.45250 7.5 NFM

154.45625-154.47875 7.5 NFM

154.48250-154.51250 7.5 NFM

154.51500-154.52500 5.0 NFM

154.52750-154.53500 7.5 NFM

154.54000-154.60750 7.5 NFM

154.61000-154.64750 7.5 NFM

154.65000-157.44750 7.5 NFM

157.45000-157.46500 5.0 NFM

157.47000-163.24500 7.5 NFM

163.25000-173.20000 12.5 NFM

173.20375-173.21000 6.25 NFM

173.21500-173.22000 5.0 NFM

173.22500-173.38750 12.5 NFM

173.39000-173.39625 6.25 NFM

173.40000-174.00000 5.0 NFM

406.00000-512.00000 6.25 NFM UHF

16

CANADA BAND PLAN

Frequency Range

(MHz)

Step

(kHz)

Mode Transmission

25.00000-27.99500 5.0 AM Citizens Band/

Business Band

28.00000-54.00000 5.0 NFM 10 Meter

Amateur Band

108.00000-136.99166 8.33 AM Aircraft Band

137.00000-174.00000 5.0 NFM Military Band

406.00000-512.00000 6.25 NFM UHF

17

SCANNING BASICS

This section provides a background on how scanning works.

You don’t really need to know all of this to use your scanner,

but some background knowledge will help you get the most

from your SR30C.

WHAT IS SCANNING?

Unlike standard AM or FM radio stations, most two-way

communications do not transmit continuously. Your

SR30C scans programmed channels until it nds an active

frequency, then stops on that frequency and remains on

that channel as long as the transmission continues. When

the transmission ends, the scanning cycle resumes until it

receives another transmission on a programmed channel.

WHAT IS SEARCHING?

The SR30C searches for active frequencies. This is dierent

from scanning because you are searching for frequencies

that have not been programmed into the scanner. When

you select frequency bands to search, the scanner searches

for any active frequency within the lower and upper limits

you specify for that band. When the scanner nds an

active frequency, it stops on that frequency as long as the

transmission lasts. If you think the frequency is interesting,

you can program it into one of the bands. If not, you can

continue to search.

18

Conventional Scanning

Conventional scanning is a relatively simple concept. Each

group of users in a conventional system is assigned a single

frequency (for simplex systems) or two frequencies (for

repeater systems). Any time one of them transmits, their

transmission always goes out on the same frequency. Up

until the late 1980’s this was the primary way that radio

systems operated.

Even today, there are many 2-way radio users who operate

using a conventional system:

• Aircraft

• Amateur radio

• FRS/GMRS users

• Broadcast AM/FM/TV stations

• Many business radio users

When you want to store a conventional system, all you need

to know are the frequencies they operate on. When you

are scanning a conventional system, the scanner stops very

briey on each channel to see if there is activity. If there isn’t,

the scanner quickly moves to the next channel. If there is,

then the scanner pauses on the transmission until it is over.

Simplex Operation

Simplex systems use a single frequency for both transmit

and receive. Most radios using this type of operation

are limited to line-of-sight operation. This type of radio

is frequently used at construction job sites and with

inexpensive consumer radios such as GMRS/FRS radios. The

range is typically 1-8 miles, depending upon the terrain and

many other factors.

19

Repeater Operation

Repeater systems use two frequencies: one transmits from

the radio to a central repeater; the other transmits from the

repeater to other radios in the system. With a repeater-based

system, the repeater is located on top of a tall building or

on a radio tower that provides great visibility to the area of

operation. When a user transmits (on an input frequency),

the signal is picked up by the repeater and retransmitted

(on an output frequency). The user’s radios always listen for

activity on the output frequency and transmit on the input

frequency. Since the repeater is located very high, there is

a very large line of sight. Typical repeater systems provide

coverage out to about a 25-mile radius from the repeater

location.

WHAT ARE BANKS?

Channel Storage Banks

To make it easier to identify and select the channels you

want to listen to, the 500 channels are divided into 10

channel storage banks containing 50 channels each. You

could use each channel storage bank to group frequencies

by department, location, area of interest, or any other way

you prefer. You can listen to any or all of the banks by using

the number keys to turn them on or o.

Service Search Bands

The scanner is preprogrammed with many of the frequencies

allocated to Weather, Police, Fire/Emergency, Marine,

Racing, Civil Air, HAM Radio, Railroad, CB radio, and Other

(Other = FRS/GMRS/MURS). Use the 10 bands allocated for

20

these service searches just like the channel storage banks,

searching the frequencies using Service Search mode (see

page 37).

Custom Search Ranges

Custom Search mode lets you program the upper and lower

limits of search ranges. You can then search these 10 custom

search ranges starting from the lowest frequency to the

highest frequency in the search range you entered. You can

turn o ranges you don’t want to search just like turning o

(disabling) channel storage banks in Scan mode.

Custom search ranges use the same LCD numbers on the

display as the 10 channel storage banks (see page 32).

WHERE TO LEARN MORE

By itself, this manual really only provides part of what you

need to know to have fun scanning – how to program and

use the scanner. The website, http://www.radioreference.

com, is the Internet’s premier source for user-supported

radio system information. You can nd lists of frequencies for

your area there. This web sites is not aliated with Uniden

Corporation.

For more information about Uniden and our other products,

visit http://www.uniden.com.

Page is loading ...

Uniden SR30C User manual

Uniden SR30C User manual

Related papers

Other documents