Warranty:
Fieryred warrants that its kayak racks that are purchased while this Warranty is in effect will be free
from defects in materials and workmanship for a period of 1 year from the date of receiving the
product from Fieryred or its authorized distributor/dealer. If a product fails to operate during the 1-
year Warranty Period as a result of defects in materials or workmanship, Fieryred will, at its option,
repair it, replace it with the same or similar product, or will issue a refund. Fieryred will pay for the
cost of shipping or transportation of a defective component to us.
Any and all warranty coverage does not cover replacement of parts and components damaged by
abuse, neglect, improper or unreasonable use, crash damage, water or excessive moisture, chemical
damage, improper or infrequent maintenance, accident, unauthorized alteration or modification or
items that are considered consumable.
For more warranty information, visit https://fieryred.com/pages/warranty-policy
INSTALLATION:
Step 1:
Insert the short cradle into the
rubber bottom.
Step 2:
Insert the long cradle into the
rubber bottom.
Step 3:
Please make sure that the holes of the
cradles and rubber bottom align with
each other.
Step 4:
Please insert the long and short
carriage bolts in accordance
with the picture.
Step 5:
Place the big clamp bracket onto the
bottom of the J-Bar.
Step 8:
Tighten short carriage bolts and
washers with nut.
Step 7:
Please tighten clamp knob, small
clamp bracket, washer and nut in
accordance with the picture.
Step 8:
Finished.