Simrad HD Radar Software Installation guide

HDRadarSoftwareInstallation

TheseinstructionsexplainhowtoupgradethesoftwareinthefollowingHDRadarprocessors

6kWProcessor000‐12591‐001

10kWProcessor000‐12592‐001

25kWProcessor000‐12593‐001

Itisalsocompatiblewitholderprocessorboxes,includingthe2kW4kWunitsthathavebeen

returnedtoNavicoforupgradetotheWinCEoperatingsystem(seeTB7400fromJuly2015)

DownloadthefilePulseRadarApp2_1.8.337.riwfromthesimrad‐yachtingwebsite

Copytheupdatefiletoanemptymediacard

NotethemediacardhastobeanSDCardtousewithanNSOevo2orMicroSDCardtousewith

NSSevo2/evo3.

Note:Mediacardsupto32GBformatted

FAT32aresupportedbySimradMFDs.Mediacards

largerthan32GBwillneedtobeformattedtoNTFSbeforeuse.

Importantthingstoremember

 Donotremovethemediacardduringtheupdateprocess

 Donotturnoffthedisplayorremovepowerfromtheradarduringasoftwareupdate

 Donotstarttheupgradewhentheradarisintransmitmode

InstallationInstructions

1. Startthemultifunction‐displayandwaitfortheradartowarmup(Pulseradars) thenenter

Stand‐by.Donotstarttheupgradewhenradaristransmitting!

2. InsertyourMediaCardintothecardreader.

3. PressHOME

4. SelectFiles



5. Selectthemediacardthatholds

theupgradefile

6. SelecttheupdateFile



7. SelectUpgrade



8. Selectthecheckboxoftheradarprocessortobeupgraded,thenselectStartUpgrade



9. Theupgradeprocesstakes1‐2minutes



10. Theradarprocessorwillrestart.



Simrad HD Radar Software, HD Radar Installation guide