Franklin Brass 211-5SS Installation guide

Type
Installation guide

This manual is also suitable for

Curved Shower Rods 211 Series
INSTALLATION:
Mount wall brackets 3” inside where a straight rod would be installed using supplied fasteners. Note the
markings on brackets for stationary and adjustable attachment. Depress pins on stationary end of rod
and clip into bracket. Repeat step for adjustable rod end. Slide flanges over brackets. Wood blocking is
preferable behind all wall surfaces. If wood blocking is not available, use anchors or plugs provided
with screws.
60"
1524.0 mm
6"
152.4 m m
2- 3/ 16"
56 .0 m m
2-11/16"
68 .75 mm
“TOOL FREE ADJUSTMENT” 68.75 mm
NO CUTTING REQUIRED FOR THE
FOLLOWING FINISHED OPENINGS
5’ ROD ADJUSTMENTS = (4’11” – 5’1”)
6’ ROD ADJUSTMENTS = (5’11” – 6’1”)
  • Page 1 1

Franklin Brass 211-5SS Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI