Makita XOC01Z-BL1840B Specification

Type
Specification

This manual is also suitable for

makitatools.com
SLIM BODY DESIGN
18
V
LXT® Lithium-Ion Cordless
Cut-Out Tool Kit
Model XOC01M/ XOC01Z
Accepts both 1/8" and 1/4" bits
VERSATILITY
On board bit change capabilities
eliminates need for wrench
CONVENIENCE
Slim body design (2-1/4")
for comfort and control
CONTROL
Delivers 30,000 RPM for fast cutting
POWER
MAKITA-BUILT MOTOR DELIVERS 30,000 RPM FOR FAST CUTTING
Slide switch with lock-on for operator convenience
Slim body design (2-1/4" diameter) for comfort and control
Weighs only 3.7 lbs. with battery for reduced operator fatigue
Quick and easy “tool-less” depth adjustment
makitatools.com
18
V
LXT® Lithium-Ion Cordless Cut-Out Tool Kit
Model XOC01M/ XOC01Z
FEATURES & BENEFITS
STANDARD EQUIPMENT
SPECIFICATIONS
Makita offers a wide variety of accessories. For a complete listing,
please refer to the Makita General Catalog or visit our website at
makitatools.com, or call 1-800-4MAKITA.
All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
The Makita Teal Color is the trade dress of Makita Corporation and is protected under common law and registered with the U.S. Patent and Trademark Office
NTF-0914 MA-4104-14
088381 68882 6
Model XOC01M
088381 67326 6
Model XOC01Z
n Makita-built motor delivers 30,000 RPM for fast cutting
n Slide switch with lock-on for operator convenience
n Slim body design (2-1/4" diameter) for comfort and control
n Weighs only 3.7 lbs. with battery for reduced operator fatigue
n Quick and easy “tool-less” depth adjustment
n On board bit change capabilities eliminates need for wrench
n Large and conveniently located shaft lock button for fast
bit changes
n Vent slots direct air and debris away from the operator
n Equipped with Star Protection Computer Controls™ to
protect against overloading, over-discharging and
over-heating
n Rapid Optimum Charger communicates with the batterys
built-in chip throughout the charging process to optimize
battery life by actively controlling current, voltage
and temperature
n Rapid Optimum Charger has a built-in fan to cool the
battery for faster more, efficient charging
n Compatible with Makita18V Lithium-Ion batteries with
a Star symbol
n Accepts both 1/8" and 1/4" bits
n (2) 18V LXT® Lithium-Ion 4.0 Ah battery (BL1840)
n 18V Lithium-Ion Rapid Optimum Charger (DC18RC)
n Spanner wrench (781008-0)
n (2) Drywall guide point bits (193446-8)
n XOC01Z - Tool Only
Collet Capacity 1/8", 1/4"
No Load Speed 30,000 RPM
Battery 18V LXT® Lithium-Ion 4.0 Ah
Overall Length 12-3/8"
Net Weight 3.7 lbs.
UPC Code XOC01M 088381-688826
UPC Code XOC01Z 088381-673266
OPTIONAL ACCESSORIES
n 18V Lithium-Ion Rapid Optimum 4-Port Charger
(DC18SF)
n
18V LXT® Lithium-Ion 3.0 Ah Battery (BL1830)
  • Page 1 1
  • Page 2 2

Makita XOC01Z-BL1840B Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI